Brass BSPP Female Swivel × Push-Lock Hose Barb
Brass BSPP Female Swivel × Push-Lock Hose Barb. 4 part numbers, 1/4" to 3/4"; the size table gives the size on each end for every Indus part number.
Key features
- Body Configuration: straight hose barb
- Port A Thread: BSPP, 1/4" to 3/4" (G1/4-19 to G3/4-14)
- Port A Sealing: BSP parallel thread, sealed by a bonded seal, washer or cone seat rather than on the thread
- Nominal Size Range: 1/4" to 3/4"
- Body Configuration
- straight hose barb
- Port A Thread
- BSPP, 1/4" to 3/4" (G1/4-19 to G3/4-14)
- Port A Sealing
- BSP parallel thread, sealed by a bonded seal, washer or cone seat rather than on the thread
Product description
The Brass BSPP Female Swivel × Push-Lock Hose Barb is a straight hose barb, in brass. Its ends are BSPP female swivel and push-lock hose barb. Push-lock barbs take push-on hose without clamps or ferrules; the manufacturer recommends them for low-pressure lines, with push-lock hose rated for the medium.
Construction
- Body: straight hose barb
- End 1: BSPP female swivel
- End 2: push-lock hose barb
- Material: brass
Ends and sealing
- BSPP: BSP parallel thread, sealed by a bonded seal, washer or cone seat rather than on the thread; ISO 228-1.
- push-lock hose barb: push-lock barb: the hose is pushed over the barbs and held without a clamp or ferrule.
Sizes
4 part numbers, 1/4" to 3/4". The Sizes & Part Numbers tab lists the size on each end for every one.
- End 1: BSPP, 1/4" to 3/4" (G1/4-19 to G3/4-14)
- End 2: push-lock hose barb, 1/4" to 3/4"
Pressure and service
The manufacturer publishes no pressure rating for this family. Tell us the medium, working pressure and temperature, and we will confirm the fitting before you order.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the size and thread type on each end, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | straight hose barb |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | BSPP, 1/4" to 3/4" (G1/4-19 to G3/4-14) |
| Port A Sealing | BSP parallel thread, sealed by a bonded seal, washer or cone seat rather than on the thread |
| Port A Gender | female swivel |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | push-lock hose barb, 1/4" to 3/4" |
| Port B Sealing | push-lock barb: the hose is pushed over the barbs and held without a clamp or ferrule |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/4" to 3/4" |
Construction
| Parameter | Value |
|---|---|
| Material | brass |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 228-1 |
Shipping & lead time
Sizes & part numbers
4 sizes| Indus part no. | End 1 | End 2 |
|---|---|---|
| IH-BR-8900-04-04 | 1/4" BSPP (G1/4-19) | 1/4" hose barb |
| IH-BR-8900-06-06 | 3/8" BSPP (G3/8-19) | 3/8" hose barb |
| IH-BR-8900-08-08 | 1/2" BSPP (G1/2-14) | 1/2" hose barb |
| IH-BR-8900-12-12 | 3/4" BSPP (G3/4-14) | 3/4" hose barb |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Brass Push-Lock Hose Barb × NPTF Male Swivel
Brass Push-Lock Hose Barb × NPTF Male
Brass Push-Lock Hose Barb × NPTF Male 90° Elbow
Brass Push-Lock Hose Barb × NPSM Female Swivel, Ball Seat
Brass Push-Lock Hose Barb × NPSM Female Swivel, Gasket Seal
Brass Push-Lock Hose Barb × SAE 45° Flare Male
Brass Push-Lock Hose Barb × SAE 45° Flare Female Swivel
