Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic)

Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic): 3 part numbers. TS30 and TS33 pumping stations lubricate machines that have pneumatic or hydraulic power, with oil or grease. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.
Key features
- Product type: Pneumatic / hydraulic lubrication pump
- Series: Bijur Delimon TS30 and TS33 Lubrication Stations
- Drive: Compressed air or machine hydraulics
- Reservoir: T30S5AC Grease Steel 5 LB; T30P5AC Grease Plastic 5 LB; T30P4BC Oil Plastic 2.5 QT; T32P5AC Grease Plastic 10 LB; T32P4BC Oil Plastic 6 QT
- Product type
- Pneumatic / hydraulic lubrication pump
- Drive
- Compressed air or machine hydraulics
Product description
TS30 and TS33 pumping stations lubricate machines that have pneumatic or hydraulic power, with oil or grease.
Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.
How it works
Both use TP pumps; the TS30 carries up to 6 quarts and the TS33 20 quarts, which runs up to about 200 hours between fills. The hydraulic TS30 HYD is driven from the machine's hydraulic circuit. Indicator assemblies are listed for 1,450 and 2,050 psi.
Range
3 listed part numbers plus versions configured to order from 111 order codes (TS30…). The size table gives each part number's data.
Where it is used
- hydraulic presses and mobile hydraulics
- pneumatic machines without a spare electrical feed
Choosing the pump
Check the air supply (pressure and whether it is dry and filtered) or the hydraulic actuator the oiler will be plumbed into, then the distribution system and lubricant. Air-operated lubricators are cycled by a solenoid valve from a timer, the machine control or the PLC; hydraulic oilers fire on every actuator stroke, so the shot size sets the dose.
Complete systems
A pump is one part of a lubrication system. With it we supply the Bijur Delimon distribution — meter units, injectors, divider valves or Dualine valves — and the tubing, fittings, controllers and monitoring to match, sized to the number of points and the lubricant. Send us the machine and the lubrication points and we propose the full system.
Order code — TS30 Pump
The order code is TS30 followed by one code from each position below, in order. Bijur Delimon lists 90 valid combinations; send us the code (or the options) and we confirm it with the manufacturer before quoting.
| Position | Option | Code | Meaning |
|---|---|---|---|
| 1 | Reservoir Capacity | B | T30S5AC Grease Steel 5 LB |
| F | T30P5AC Grease Plastic 5 LB | ||
| G | T30P4BC Oil Plastic 2.5 QT | ||
| R | T32P5AC Grease Plastic 10 LB | ||
| S | T32P4BC Oil Plastic 6 QT | ||
| 2 | Pumps | C | TP121C Air 18:1 |
| E | TP131C Air 50:1 | ||
| K | TP231C Air 18:1 | ||
| 3 | Pressure Indicator | A | 213515 high pressure indicator fitting shipped loose, no pressure gauge. |
| C | T3010611-3000 psi gauge, tee, 213515 high pressure indicator | ||
| E | 85287 indictor kit and pressure switch with U-902DB 3000 psi gauge. | ||
| 4 | Controller | X | None |
| 5 | Solenoid Valve | A | U62912060 solenoid operated air valve 3-way (110/120 V, 50/60 Hz) |
| X | None |
Examples of valid codes: TS30BCAXA, TS30BCAXX, TS30BCCXA.
Order code — TS30 HYD Pump
The order code is TS30 followed by one code from each position below, in order. Bijur Delimon lists 21 valid combinations; send us the code (or the options) and we confirm it with the manufacturer before quoting.
| Position | Option | Code | Meaning |
|---|---|---|---|
| 1 | Reservoir Capacity | B | T30S5AC Grease Steel 5 LB |
| F | T30P5AC Grease Plastic 5 LB | ||
| G | T30P4BC Oil Plastic 2.5 QT | ||
| H | T30P5B Oil Plastic 2 QT | ||
| R | T32P5AC Grease Plastic 10 LB | ||
| S | T32P4BC Oil Plastic 6 QT | ||
| T | T32P5B Oil Plastic 5.5 QT | ||
| 2 | Pumps | J | TP222C Hydraulic 7:1 |
| 3 | Pressure Indicator | A | 213515 high pressure indicator fitting shipped loose, no pressure gauge. |
| C | T3010611-3000 psi gauge, tee, 213515 high pressure indicator | ||
| E | 85287 indictor kit and pressure switch with U-902DB 3000 psi gauge. | ||
| 4 | Controller | X | None |
| 5 | Solenoid Valve | X | None |
Examples of valid codes: TS30BJAXX, TS30BJCXX, TS30BJEXX.
Spare parts
Genuine Bijur Delimon service parts and kits for this range are listed by part number on Bijur Delimon TS30 Lubrication Station Service Parts.
Identification
| Parameter | Value |
|---|---|
| Product type | Pneumatic / hydraulic lubrication pump |
| Series | Bijur Delimon TS30 and TS33 Lubrication Stations |
| Drive | Compressed air or machine hydraulics |
Ordering
| Parameter | Value |
|---|---|
| Order code | TS30… (90 codes), TS30… (21 codes) |
| Supply | Genuine Bijur Delimon, direct from the manufacturer (authorised distributor) |
Performance
| Parameter | Value |
|---|---|
| Reservoir | T30S5AC Grease Steel 5 LB; T30P5AC Grease Plastic 5 LB; T30P4BC Oil Plastic 2.5 QT; T32P5AC Grease Plastic 10 LB; T32P4BC Oil Plastic 6 QT |
Shipping & lead time
Sizes & part numbers
3 sizes- Indus part no.IH-BD-10412OG
- Description
- 10412OG — INDICATOR ASSEMBLY:2050 P.S.I.
- Indus part no.IH-BD-10412YW
- Description
- 10412YW — INDICATOR ASSEMBLY:1450 P.S.I.
- Indus part no.IH-BD-FT15423PKK
- Description
- FT15423PKK — DISC KIT 10/PACK PINK 2650PSI
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
What are the Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic) and what are they used for?▾
Which part numbers does the Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic) range include?▾
How do I select from the Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic) range?▾
What pressure and output do the Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic) have?▾
What do I quote to order from the Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic) range?▾
How do the Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic) compare with a similar range?▾
What lubricants can the Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic) be used with?▾
Can Indus supply the complete lubrication system for the Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic)?▾
Are spare parts and service kits available for the Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic)?▾
Where are the Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic) used?▾
Are the Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic) genuine, and where are they supplied from?▾
Does Indus stock the Bijur Delimon TS30 and TS33 Lubrication Stations (Pneumatic and Hydraulic) in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog






