Skip to content
BIJUR DELIMONIH-BD-AIRM

Bijur Delimon AirMatic Air-Operated Oil Lubricators

Pneumatic & Hydraulic Lubrication PumpsEx-stock · delivery in 3 days
Bijur Delimon Airmatic 27029 — 4 L reservoir, PDI system, low-level switch, pressure gauge
VIEW 01·Bijur Delimon Airmatic 27029 — 4 L reservoir, PDI system, low-level switch, pressure gauge
1 / 3

Bijur Delimon AirMatic Air-Operated Oil Lubricators: 10 part numbers, for PDI systems; oil; 4 L reservoirs. AirMatic lubricators run on shop air and suit all types of single-line oil system, with a wide stroke adjustment for any size of machine. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.

Key features

  • Product type: Pneumatic / hydraulic lubrication pump
  • Series: Bijur Delimon AirMatic Air-Operated Oil Lubricators
  • Drive: Compressed air or machine hydraulics
  • Lubrication system: PDI
  • Lubricant: Oil
  • Reservoir: 4 L
  • Output: 2-10cc/cycle
  • Max pressure: 400 psi (28 bar)
Product type
Pneumatic / hydraulic lubrication pump
Drive
Compressed air or machine hydraulics
Lubrication system
PDI
Lubricant
Oil
DATA
Bijur Delimon AirMatic Lubricator datasheet (20349)
datasheet · EN
↓ Download
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

AirMatic lubricators run on shop air and suit all types of single-line oil system, with a wide stroke adjustment for any size of machine.

Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.

How it works

Output follows piston stroke and cycle rate: the stroke is preset to a fixed discharge and the supply air pressure governs delivery. Used with PDI injectors, a built-in relief device lets the injectors reset after each shot. The 27029 package comes with a 4 L metal reservoir.

Range

10 listed part numbers plus versions configured to order from 192 order codes (AIR…) — systems PDI; lubricants Oil; reservoirs 4 L; output 2-10cc/cycle; maximum pressure 400 psi (28 bar). The size table gives each part number's data.

Row descriptions are Bijur Delimon's own: LS / LLS level or low-level switch, HLS high-level switch, PG pressure gauge, PS pressure switch, CNTL controller, P&M pump and motor, SLR single-line resistance, PDI positive-displacement injector, PROG progressive. The columns give each part number's published data.

Where it is used

  • machine tools with an air supply
  • presses and transfer lines
  • PDI and SLR oil systems

Choosing the pump

Check the air supply (pressure and whether it is dry and filtered) or the hydraulic actuator the oiler will be plumbed into, then the distribution system and lubricant. Air-operated lubricators are cycled by a solenoid valve from a timer, the machine control or the PLC; hydraulic oilers fire on every actuator stroke, so the shot size sets the dose.

Complete systems

A pump is one part of a lubrication system. With it we supply the Bijur Delimon distribution — meter units, injectors, divider valves or Dualine valves — and the tubing, fittings, controllers and monitoring to match, sized to the number of points and the lubricant. Send us the machine and the lubrication points and we propose the full system.

Order code — AirMatic Pump

The order code is AIR followed by one code from each position below, in order. Bijur Delimon lists 192 valid combinations; send us the code (or the options) and we confirm it with the manufacturer before quoting.

PositionOptionCodeMeaning
1Reservoir Capacity11 liter plastic reservoir
44 liter plastic reservoir
1212 liter metal reservoir
2Output Mode (System Type)ASLR (single line resistance)
BPDI (positive displacement injector)
CProgressive (sequential movement)
DInjector (ZEE Type)
3Low Level SwitchAwithout low level switch
Bwith low level switch
4Solenoid ValveANo solenoid
B110VAC solenoid
C220VAC solenoid
F110VAC solenoid with DIN connector
G220VAC solenoid with DIN connector
H24VDC solenoid
J12VDC solenoid
K24VDC solenoid with DIN connector

Examples of valid codes: AIR1BAA, AIR1BAB, AIR1BAC.

Spare parts

Genuine Bijur Delimon service parts and kits for this range are listed by part number on Bijur Delimon AirMatic Lubricator Service Parts.

Documents

Bijur Delimon's datasheets for this range are in the Downloads tab.

Identification

ParameterValue
Product typePneumatic / hydraulic lubrication pump
SeriesBijur Delimon AirMatic Air-Operated Oil Lubricators
DriveCompressed air or machine hydraulics

Application

ParameterValue
Lubrication systemPDI
LubricantOil
Viscosity / NLGI range150-8000 SSU

Performance

ParameterValue
Reservoir4 L
Output2-10cc/cycle
Max pressure400 psi (28 bar)

Electrical

ParameterValue
Monitoringlow-level switch, pressure gauge

Connections

ParameterValue
Outlet thread1/8NPT
Fill connectionFILL CAP

Environment

ParameterValue
Operating temperature0°C-49°C

Ordering

ParameterValue
Order codeAIR… (192 codes)
SupplyGenuine Bijur Delimon, direct from the manufacturer (authorised distributor)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at