Bijur Delimon FZ-A Multi-Line Grease Lubricators (incl. ATEX)

Bijur Delimon FZ-A Multi-Line Grease Lubricators (incl. ATEX): configured to order (27,000 order codes). The FZ-A is a Delimon multi-line piston lubricator for direct feed of up to 12 lubrication points, with standard and ATEX versions for hazardous areas. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.
Key features
- Product type: Electric lubrication pump
- Series: Bijur Delimon FZ-A Multi-Line Grease Lubricators
- Drive: Electric motor
- Reservoir: 8 Liter; 15 Liter; 30 Liter; 30 Liter + reservoir support with base plate, 450 x 450 mm; 15 Liter + reservoir support with base plate, 450 x 450 mm
- Outlets: 1 Outlet; 2 Outlets; 3 Outlets; 4 Outlets; 5 Outlets; 6 Outlets (+6 more)
- Product type
- Electric lubrication pump
- Drive
- Electric motor
Product description
The FZ-A is a Delimon multi-line piston lubricator for direct feed of up to 12 lubrication points, with standard and ATEX versions for hazardous areas.
Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.
How it works
It is driven from the machine (pendulum lever or free shaft end) or by a reduction gear and motor, so output follows machine speed without a separate controller. A grease agitator and reservoir wedge plate keep grease at the pistons; reservoirs run from 2.5 to 30 litres, and an ultrasonic level switch with fill valve allows automatic refilling. It can also feed progressive and gear-spray systems.
Range
Configured to order from 27,000 order codes (FAX…, FZA…). The order-code table below lists every option.
Where it is used
- cement and steel plant
- crushers, mills and kilns
- hazardous-area machinery (ATEX)
Choosing the pump
Start from the distribution system the pump has to drive — SLR meter units, PDI injectors, progressive dividers, Dualine valves or direct multi-line feeds — then the lubricant: oil grade in cSt, or grease NLGI class (fluid grease for PDI). Size the reservoir for the refill interval you want, match the supply voltage and enclosure to the machine, and decide how the cycle is controlled: an integral timer or controller, an external controller, or the machine PLC. Level and pressure switches let the control system prove each cycle.
Complete systems
A pump is one part of a lubrication system. With it we supply the Bijur Delimon distribution — meter units, injectors, divider valves or Dualine valves — and the tubing, fittings, controllers and monitoring to match, sized to the number of points and the lubricant. Send us the machine and the lubrication points and we propose the full system.
Order code — FZ-A Pump ATEX
The order code is FAX followed by one code from each position below, in order. Bijur Delimon lists 2,160 valid combinations; send us the code (or the options) and we confirm it with the manufacturer before quoting.
| Position | Option | Code | Meaning |
|---|---|---|---|
| 1 | Number of Outlets | 01 | 1 Outlet |
| 02 | 2 Outlets | ||
| 03 | 3 Outlets | ||
| 04 | 4 Outlets | ||
| 05 | 5 Outlets | ||
| 06 | 6 Outlets | ||
| 07 | 7 Outlets | ||
| 08 | 8 Outlets | ||
| 09 | 9 Outlets | ||
| 10 | 10 Outlets | ||
| 11 | 11 Outlets | ||
| 12 | 12 Outlets | ||
| 2 | Revision | B | Revision B |
| 3 | Drive Type | 14 | Drive type Zone 1: Reduction gear 215:1 and flange motor 380/400/415V 50Hz (460 60Hz) 3PH |
| 15 | Drive type Zone 1: Reduction gear 215:1 and flange motor 500V 50Hz 3PH | ||
| 18 | Drive type Zone 1: Reduction gear 215:1 and flange motor 480V 60Hz 3PH | ||
| 24 | Drive type Zone 2 and 22: Reduction gear 215:1 and flange motor 380/400/415V 50Hz (460 60 Hz) 3PH | ||
| 25 | Drive type Zone 2 and 22: Reduction gear 215:1 and flange motor 500V 50Hz 3PH | ||
| 28 | Drive type Zone 2 and 22: Reduction gear 215:1 and flange motor 480V 60 Hz 3Ph | ||
| 4 | Drive Position | A | Drive position 1 left (default) |
| E | Drive position 5 right | ||
| 5 | Reservoir | A | 8 Liter |
| B | 15 Liter | ||
| C | 30 Liter | ||
| E | 30 Liter + reservoir support with base plate, 450 x 450 mm | ||
| F | 15 Liter + reservoir support with base plate, 450 x 450 mm | ||
| 6 | Accessories | 00 | Without |
| 01 | Fill level switch (MIN/MAX) for Zone 1 compatibility | ||
| 20 | Increased pressure limit 200 bar instead of 160 bar | ||
| 21 | Fill level switch (MIN/MAX) + increased pressure limit 200 bar instead of 160 bar for Zone 1 compatibility |
Examples of valid codes: FAX01B14AA00, FAX01B14AA01, FAX01B14AA20.
Order code — FZ-A Pump
The order code is FZA followed by one code from each position below, in order. Bijur Delimon lists 24,840 valid combinations; send us the code (or the options) and we confirm it with the manufacturer before quoting.
| Position | Option | Code | Meaning |
|---|---|---|---|
| 1 | Number of Outlets | 01 | 1 Outlet |
| 02 | 2 Outlets | ||
| 03 | 3 Outlets | ||
| 04 | 4 Outlets | ||
| 05 | 5 Outlets | ||
| 06 | 6 Outlets | ||
| 07 | 7 Outlets | ||
| 08 | 8 Outlets | ||
| 09 | 9 Outlets | ||
| 10 | 10 Outlets | ||
| 11 | 11 Outlets | ||
| 12 | 12 Outlets | ||
| 2 | Revision | B | Revision B |
| 3 | Drive Type | 01 | Pendulum lever Ratio: 3:1 |
| 02 | Pendulum lever Ratio: 12:1 | ||
| 03 | Pendulum lever Ratio: 25:1 | ||
| 04 | Pendulum lever Ratio: 50:1 | ||
| 05 | Free shaft end Ratio: 3:1 | ||
| 06 | Free shaft end Ratio: 12:1 | ||
| 07 | Free shaft end Ratio: 25:1 | ||
| 08 | Free shaft end Ratio: 50:1 | ||
| 09 | Reduction gear Ratio: 95:1 | ||
| 10 | Reduction gear Ratio: 215:1 | ||
| 11 | Reduction gear Ratio: 345:1 | ||
| 55 | Reduction gear and motor 115VAC 60Hz Ratio 215:1 Single Phase | ||
| 56 | Reduction gear and motor 115VAC 60Hz Ratio 345:1 Single Phase | ||
| 57 | Reduction gear and motor 115VAC 60Hz Ratio 710:1 Single Phase | ||
| 58 | Reduction gear and motor 115VAC 60Hz Ratio 1420:1 Single Phase | ||
| 12 | Reduction gear and motor 230-260/400-460VAC 50/60Hz Ratio 215:1 Three Phase | ||
| 13 | Reduction gear and motor 230-260/400-460VAC 50/60Hz Ratio 345:1 Three Phase | ||
| 14 | Reduction gear and motor 230-260/400-460VAC 50/60Hz Ratio 710:1 Three Phase | ||
| 15 | Reduction gear and motor 230-260/400-460VAC 50/60Hz Ratio 1420:1 Three Phase | ||
| 17 | Reduction gear and motor 500VAC 50Hz Ratio 215:1 Three Phase | ||
| 18 | Reduction gear and motor 500VAC 50Hz Ratio 345:1 Three Phase | ||
| 19 | Reduction gear and motor 500VAC 50Hz Ratio 710:1 Three Phase | ||
| 20 | Reduction gear and motor 500VAC 50Hz Ratio 1420:1 Three Phase | ||
| 30 | Reduction gear and motor flange Ratio 215:1 | ||
| 28 | Reduction gear and motor flange Ratio 345:1 | ||
| 27 | Reduction gear and motor flange Ratio 710:1 | ||
| 29 | Reduction gear and motor flange Ratio 1420:1 | ||
| 4 | Drive Position | O | Without drive position (for free shaft end and pendulum lever) |
| A | Drive position 1 left (default) | ||
| E | Drive position 5 right | ||
| 5 | Reservoir | A | 8 Liter |
| B | 15 Liter | ||
| C | 30 Liter | ||
| D | 2.5 Liter | ||
| E | 30 Liter + reservoir support with base plate, 450 x 450 mm | ||
| F | 15 Liter + reservoir support with base plate, 450 x 450 mm | ||
| 6 | Accessories | 00 | Without |
| 01 | Ultrasonic Level Switch | ||
| 02 | Filling Valve | ||
| 03 | Ultrasonic Level Switch + Filling Valve | ||
| 20 | 1 x pressure limitation 160 bar, d=10 mm | ||
| 36 | 1 x pressure limitation 200 bar, d=10 mm | ||
| 28 | 1 x pressure limitation 160 bar, level switch + filling valve | ||
| 44 | 1 x pressure limitation 200 bar, level switch + filling valve | ||
| 21 | 2 x pressure limitation 160 bar, d=10 mm | ||
| 37 | 2 x pressure limitation 200 bar, d=10 mm | ||
| 29 | 2 x pressure limitation 160 bar, level switch + filling valve | ||
| 45 | 2 x pressure limitation 200 bar, level switch + filling valve | ||
| 22 | 3 x pressure limitation 160 bar, d=10 mm | ||
| 38 | 3 x pressure limitation 200 bar, d=10 mm | ||
| 30 | 3 x pressure limitation 160 bar, level switch + filling valve | ||
| 46 | 3 x pressure limitation 200 bar, level switch + filling valve | ||
| 23 | 4 x pressure limitation 160 bar, d=10 mm | ||
| 39 | 4 x pressure limitation 200 bar, d=10 mm | ||
| 31 | 4 x pressure limitation 160 bar, level switch + filling valve | ||
| 47 | 4 x pressure limitation 200 bar, level switch + filling valve | ||
| 24 | 5 x pressure limitation 160 bar, d=10 mm | ||
| 40 | 5 x pressure limitation 200 bar, d=10 mm | ||
| 32 | 5 x pressure limitation 160 bar, level switch + filling valve | ||
| 48 | 5 x pressure limitation 200 bar, level switch + filling valve | ||
| 25 | 6 x pressure limitation 160 bar, d=10 mm | ||
| 41 | 6 x pressure limitation 200 bar, d=10 mm | ||
| 33 | 6 x pressure limitation 160 bar, level switch + filling valve | ||
| 49 | 6 x pressure limitation 200 bar, level switch + filling valve | ||
| 58 | 7 x pressure limitation 160 bar, d=10 mm | ||
| 53 | 7 x pressure limitation 160 bar, level switch + filling valve | ||
| 52 | 7 x pressure limitation 200 bar, level switch + filling valve | ||
| 26 | 8 x pressure limitation 160 bar, d=10 mm | ||
| 42 | 8 x pressure limitation 200 bar, d=10 mm | ||
| 34 | 8 x pressure limitation 160 bar, level switch + filling valve | ||
| 50 | 8 x pressure limitation 200 bar, level switch + filling valve | ||
| 56 | 9 x pressure limitation 160 bar, level switch + filling valve | ||
| 60 | 9 x pressure limitation 200 bar, level switch + filling valve | ||
| 27 | 10 x pressure limitation 160 bar, d=10 mm | ||
| 43 | 10 x pressure limitation 200 bar, d=10 mm | ||
| 35 | 10 x pressure limitation 160 bar, level switch + filling valve | ||
| 51 | 10 x pressure limitation 200 bar, level switch + filling valve | ||
| 55 | 11 x pressure limitation 160 bar, level switch + filling valve | ||
| 04 | 12 x pressure limitation 160 bar, d=10 mm | ||
| 06 | 12 x pressure limitation 200 bar, d=10 mm | ||
| 05 | 12 x pressure limitation 160 bar, level switch + filling valve | ||
| 07 | 12 x pressure limitation 200 bar, level switch + filling valve |
Examples of valid codes: FZA01B01OA00, FZA01B01OA01, FZA01B01OA02.
Spare parts
Genuine Bijur Delimon service parts and kits for this range are listed by part number on Bijur Delimon FZ-A and FZ-B Lubricator Spare Parts and Kits.
Documents
Bijur Delimon's datasheets and manuals for this range are in the Downloads tab.
Identification
| Parameter | Value |
|---|---|
| Product type | Electric lubrication pump |
| Series | Bijur Delimon FZ-A Multi-Line Grease Lubricators |
| Drive | Electric motor |
| Drive options | Drive type Zone 1: Reduction gear 215:1 and flange motor 380; Drive type Zone 1: Reduction gear 215:1 and flange motor 500; Drive type Zone 1: Reduction gear 215:1 and flange motor 480; Drive type Zone 2 and 22: Reduction gear 215:1 and flange mo; Drive type Zone 2 and 22: Reduction gear 215:1 and flange mo; Drive type Zone 2 and 22: Reduction gear 215:1 and flange mo |
Ordering
| Parameter | Value |
|---|---|
| Order code | FAX… (2,160 codes), FZA… (24,840 codes) |
| Supply | Genuine Bijur Delimon, direct from the manufacturer (authorised distributor) |
Performance
| Parameter | Value |
|---|---|
| Outlets | 1 Outlet; 2 Outlets; 3 Outlets; 4 Outlets; 5 Outlets; 6 Outlets (+6 more) |
| Reservoir | 8 Liter; 15 Liter; 30 Liter; 30 Liter + reservoir support with base plate, 450 x 450 mm; 15 Liter + reservoir support with base plate, 450 x 450 mm |
Shipping & lead time
What are Bijur Delimon FZ-A Multi-Line Grease Lubricators?▾
How do I read the order code for Bijur Delimon FZ-A Multi-Line Grease Lubricators?▾
Which part numbers and versions does Bijur Delimon FZ-A Multi-Line Grease Lubricators cover?▾
How do I choose the right FZ-A Multi-Line Grease Lubricators for my machine?▾
What pressure, output and reservoir ratings do Bijur Delimon FZ-A Multi-Line Grease Lubricators have?▾
What material and finish is Bijur Delimon FZ-A Multi-Line Grease Lubricators supplied in?▾
Which datasheets and approvals are available for Bijur Delimon FZ-A Multi-Line Grease Lubricators?▾
Can Bijur Delimon FZ-A Multi-Line Grease Lubricators be supplied as part of a complete lubrication system?▾
Do you supply spare parts and service kits for Bijur Delimon FZ-A Multi-Line Grease Lubricators?▾
Where are Bijur Delimon FZ-A Multi-Line Grease Lubricators typically used?▾
What do I need to give you to quote Bijur Delimon FZ-A Multi-Line Grease Lubricators?▾
Do you keep Bijur Delimon FZ-A Multi-Line Grease Lubricators in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








