Aluminum NPSH Threaded Hose End Nozzle Holders

Aluminum NPSH Threaded Hose End Nozzle Holders — aluminium sandblast hose end with an NPSH-threaded nozzle holder. Sizes 3/4", 1", 1-1/4" and 1-1/2". Aluminum. Supplied by Sealfast (USA); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: Sandblast Coupling
- Coupling Type / Variant: Sandblast — NPSH Threaded Hose End Nozzle Holders
- End A Configuration: Hose end
- End B Configuration: NPSH-threaded nozzle holder
- Size Range: 3/4", 1", 1-1/4" and 1-1/2"
- Coupling Family
- Sandblast Coupling
- Coupling Type / Variant
- Sandblast — NPSH Threaded Hose End Nozzle Holders
- End A Configuration
- Hose end
- End B Configuration
- NPSH-threaded nozzle holder
- Size Range
- 3/4", 1", 1-1/4" and 1-1/2"
Product description
The Aluminum NPSH Threaded Hose End Nozzle Holders is a Sandblast Coupling from the Sealfast (USA) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.
Configuration
- Coupling family: Sandblast Coupling
- Coupling type: Sandblast — NPSH Threaded Hose End Nozzle Holders
- End A: Hose end
- End B: NPSH-threaded nozzle holder
Specifications
- Size range: 3/4", 1", 1-1/4" and 1-1/2"
- Material: Aluminum
- Working pressure: Not published by Sealfast. Give us your working pressure and medium and we will check it with the manufacturer.
- Standard: NPSH hose thread (ASME B1.20.7)
About the family
Sandblast couplings join blast hose to the blast machine and to the nozzle. Hose couplers connect two lengths of blast hose, and a nozzle holder carries the blasting nozzle on a threaded end. This shelf carries Sealfast's aluminium hose ends with crowfoot faces and NPSH-threaded nozzle holders, and Sunpool's nylon hose couplers, nozzle holders and female thread adapters in 1-1/4" and 1-1/2", in yellow or red.
Selection and service notes
Blast couplings wear with the hose, so inspect them and their gaskets at every make-up, pin the joint with safety clips and fit a whip check across it. Only one part here has a published rating — Sealfast's aluminium female NPT crowfoot end, at 110 psi — so confirm the rest for your blast pressure.
How to order
Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.
Further reading: Bulk material and sandblast hose.
Sealfast part numbers
Order by the Sealfast part number for the material you need, or by the Indus part number in the size table.
| Size | Aluminum |
|---|---|
| 3/4" | HE 1AL |
| 1" | HE 2AL |
| 1-1/4" | HE 3AL |
| 1-1/2" | HE 4AL |
Part numbers from Seal Fast, Inc.’s catalogue at products.sealfast.com, checked 6 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Sandblast Coupling |
| Coupling Type / Variant | Sandblast — NPSH Threaded Hose End Nozzle Holders |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Hose end |
| End B Configuration | NPSH-threaded nozzle holder |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 3/4", 1", 1-1/4" and 1-1/2" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Aluminum |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | NPSH hose thread (ASME B1.20.7) |
Shipping & lead time
Sizes & part numbers
4 sizes- Indus part no.IH-SB-NPSH-THREADED-HOSE-END-NOZZLE-HOLDERS-075
- Nominal size
- 3/4"
- Indus part no.IH-SB-NPSH-THREADED-HOSE-END-NOZZLE-HOLDERS-100
- Nominal size
- 1"
- Indus part no.IH-SB-NPSH-THREADED-HOSE-END-NOZZLE-HOLDERS-125
- Nominal size
- 1-1/4"
- Indus part no.IH-SB-NPSH-THREADED-HOSE-END-NOZZLE-HOLDERS-150
- Nominal size
- 1-1/2"
What are the Aluminum NPSH Threaded Hose End Nozzle Holders and what are they used for?▾
How do the part numbers for the Aluminum NPSH Threaded Hose End Nozzle Holders read?▾
What sizes do the Aluminum NPSH Threaded Hose End Nozzle Holders come in?▾
Which nozzle holder size do I need for my blast nozzle?▾
What is the working pressure of the Aluminum NPSH Threaded Hose End Nozzle Holders?▾
What are the Aluminum NPSH Threaded Hose End Nozzle Holders made from?▾
Which standards do the Aluminum NPSH Threaded Hose End Nozzle Holders follow?▾
What does the Aluminum NPSH Threaded Hose End Nozzle Holder connect to?▾
How do I install and look after the Aluminum NPSH Threaded Hose End Nozzle Holders?▾
How does the aluminum NPSH nozzle holder differ from the nylon sandblasting nozzle holder?▾
Where are the Aluminum NPSH Threaded Hose End Nozzle Holders made, and can you ship them from Dubai?▾
Do you stock the Aluminum NPSH Threaded Hose End Nozzle Holders in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Düsenhalter
- fr
- porte-buse
- es
- portaboquillas
- it
- portaugello
From the blog





