1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot

1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot — aluminium female NPT sandblast end with a crowfoot face, rated 110 psi. Sizes 1-1/4" and 1-1/2". Aluminum. Supplied by Sealfast (USA); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: Sandblast Coupling
- Coupling Type / Variant: Sandblast — 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot
- End A Configuration: Female NPT pipe thread
- End B Configuration: Crowfoot (claw) face
- Size Range: 1-1/4" and 1-1/2"
- Working Pressure: 110 psi (per Seal Fast, at 70°F)
- Coupling Family
- Sandblast Coupling
- Coupling Type / Variant
- Sandblast — 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot
- End A Configuration
- Female NPT pipe thread
- End B Configuration
- Crowfoot (claw) face
- Size Range
- 1-1/4" and 1-1/2"
- Working Pressure
- 110 psi (per Seal Fast, at 70°F)
Product description
The 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot is a Sandblast Coupling from the Sealfast (USA) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.
Configuration
- Coupling family: Sandblast Coupling
- Coupling type: Sandblast — 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot
- End A: Female NPT pipe thread
- End B: Crowfoot (claw) face
Specifications
- Size range: 1-1/4" and 1-1/2"
- Material: Aluminum
- Working pressure: 110 psi (per Seal Fast, at 70°F)
- Standard: NPT pipe thread (ASME B1.20.1)
About the family
Sandblast couplings join blast hose to the blast machine and to the nozzle. Hose couplers connect two lengths of blast hose, and a nozzle holder carries the blasting nozzle on a threaded end. This shelf carries Sealfast's aluminium hose ends with crowfoot faces and NPSH-threaded nozzle holders, and Sunpool's nylon hose couplers, nozzle holders and female thread adapters in 1-1/4" and 1-1/2", in yellow or red.
Selection and service notes
Blast couplings wear with the hose, so inspect them and their gaskets at every make-up, pin the joint with safety clips and fit a whip check across it. Only one part here has a published rating — Sealfast's aluminium female NPT crowfoot end, at 110 psi — so confirm the rest for your blast pressure.
How to order
Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.
Further reading: Bulk material and sandblast hose.
Sealfast part numbers
Order by the Sealfast part number for the material you need, or by the Indus part number in the size table.
| Size | Aluminum |
|---|---|
| 1-1/4" | SB 1AL |
| 1-1/2" | SB 2AL |
Part numbers from Seal Fast, Inc.’s catalogue at products.sealfast.com, checked 6 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Sandblast Coupling |
| Coupling Type / Variant | Sandblast — 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Female NPT pipe thread |
| End B Configuration | Crowfoot (claw) face |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1-1/4" and 1-1/2" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Aluminum |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 110 psi (per Seal Fast, at 70°F) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | NPT pipe thread (ASME B1.20.1) |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-SB-1-1-4-TO-1-1-2-INCH-IN-PIPE-THREAD-SIZE-125
- Nominal size
- 1-1/4"
- Indus part no.IH-SB-1-1-4-TO-1-1-2-INCH-IN-PIPE-THREAD-SIZE-150
- Nominal size
- 1-1/2"
What is the 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot and what is it used for?▾
How do the part numbers for the 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot read?▾
What sizes does the 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot come in?▾
Which size do I need for a blast machine outlet or nozzle thread?▾
What is the working pressure of the 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot?▾
What is the 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot made from?▾
Which standards does the 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot follow?▾
What does the 1 1/4 to 1 1/2 Inch aluminium hose end with crowfoot connect to?▾
How do I install and look after the 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot?▾
How does the 1 1/4 to 1 1/2 Inch pipe thread aluminum hose end differ from the plain crowfoot hose end?▾
Where is the 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot made, and can you ship it from Dubai?▾
Can I buy the 1 1/4 to 1 1/2 Inch (in) Pipe Thread Size Aluminum Hose End with Crowfoot from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog





