
Alemite Air/Water Hoses: 11 part numbers.
Product description
Alemite Air/Water Hoses: 11 part numbers.
Specification
- Material: Steel, Synthetic Rubber, Brass
- Pressure stated by the maker: 300 to 1,200 psi (21 to 83 bar), by size
- Part numbers: 11
Sizes and part numbers
The Sizes & Part Numbers tab lists every Alemite part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Alemite part number. Price and lead time are confirmed with the quotation.
Shipping & lead time
Sizes & part numbers
11 sizes- Alemite part no.317803-3
- Description
- Hose, Low Pressure, 3/8 Inner Dia, 1/4 Male X 1/4 Male
- Working pressure (bar)
- —
- Alemite part no.317809-5F
- Description
- Hose, Low Pressure, 1/2 Inner Dia, 1/2 Male X 1/4 Female
- Working pressure (bar)
- —
- Alemite part no.317803-25
- Description
- Hose, Low Pressure, 3/8 Inner Dia, 1/4 Male X 1/4 Male
- Working pressure (bar)
- —
- Alemite part no.317807-5F
- Description
- Hose, Low Pressure, 1/2 Inner Dia, 3/8 Male X 1/4 Female
- Working pressure (bar)
- 21
- Alemite part no.317811-80
- Description
- Hose, Low Pressure, 1/2 Inner Dia, 1/2 Male X 1/2 Male
- Working pressure (bar)
- —
- Alemite part no.317811-5
- Description
- Hose, Low Pressure, 1/2 Inner Dia, 1/2 Male X 1/2 Male
- Working pressure (bar)
- —
- Alemite part no.317803-30
- Description
- Hose, Low Pressure, 3/8 Inner Dia, 1/4 Male X 1/4 Male
- Working pressure (bar)
- 21
- Alemite part no.317803-50
- Description
- Hose, Low Pressure, 3/8 Inner Dia, 1/4 Male X 1/4 Male
- Working pressure (bar)
- 83
Show all 11 sizesShow fewer sizes
- Alemite part no.317803-40
- Description
- Hose, Low Pressure, 3/8 Inner Dia, 1/4 Male X 1/4 Male
- Working pressure (bar)
- —
- Alemite part no.317803-7
- Description
- Hose, Low Pressure, 3/8 Inner Dia, 1/4 Male X 1/4 Male
- Working pressure (bar)
- 83
- Alemite part no.317811-50
- Description
- Hose, Low Pressure, 1/2 Inner Dia, 1/2 Male X 1/2 Male
- Working pressure (bar)
- —
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the Alemite low-pressure air/water hose used for?▾
Which sizes does the Alemite low-pressure air/water hose come in?▾
How do I identify Alemite part numbers such as 317803-3?▾
What is the working pressure of the Alemite low-pressure air/water hose?▾
What is the Alemite low-pressure air/water hose made of?▾
How do I check Alemite air/water hose ratings before ordering?▾
What threads do Alemite air/water hoses have?▾
Alemite air/water hose or Dixon grease whip hose assembly: what is the difference?▾
How should I install Alemite air/water hose?▾
Can the Alemite low-pressure air/water hose be exported from Dubai, and what papers come with it?▾
Do you stock the Alemite low-pressure air/water hose in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Safety & HSE
Whip restraints and burst protection: what actually stops a failed hose hurting someone
A hose that lets go at a coupling becomes a moving object. Restraints, sleeves and guards each solve a different failure — and using the wrong one is the same as using none.
3 min read
Industrial hose
Compressed air hose selection: oil mist, temperature and the 40 bar exception
Most air hose on a site is rated 20 bar and looks the same. The differences that matter are the tube against compressor oil, the temperature off the discharge, and how the hose was built.
4 min read
Industrial hose
Universal air couplings explained: Chicago, claw and crowfoot, and the clip that holds them
The two-lug claw coupling on every compressor hose is called universal, Chicago and crowfoot, and it comes in American, European and Australian types. How they fit together, and what keeps one from letting go.
5 min read








