What sizes does the NPT Female Tee come in?

9 sizes are listed, covering -02 to -32. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one.

Is it available in stainless steel?

Yes. Every size is available in 316 stainless steel on request — add "-SS" to the part number when you enquire. Lead time is longer than for the zinc-plated carbon-steel stock.

Can I get it faster than the quoted lead time?

Tell us it is a plant-down job when you enquire. Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST.

What pressure is it rated for?

The manufacturer states between 70 and 345 bar depending on size, and the figure is printed against each size in the table. That is the rating of the adapter; the assembly is limited by whichever component is rated lowest — hose, tube or the port you are mating to.

What thread family does this adapter use?

NPT. ANSI/ASME B1.20.1. The seat is NPT taper thread. Check the thread on each end against the size table before ordering.

What are the port specs?

Port A: NPT Female. Port A: NPT 1/8-27 to 2-11.5. Port B: NPT 1/8-27 to 2-11.5. Port C: NPT 1/8-27 to 2-11.5.

What sizes are available?

9 sizes are listed, covering -02 to -32. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one. Sizes outside the table are quoted on request.

What is the maximum working pressure?

The manufacturer states 70 to 345 bar depending on size, and the figure is printed against each size in the table. The rating of an assembly tracks its lowest-rated component, so check it against the hose, the tube and the port you are mating to.

What materials and finishes are available?

Standard: carbon steel with a zinc-plated, Cr3+ passivated, RoHS-compliant finish. 316 stainless steel is available on request for marine, chemical or food-grade service — add "-SS" to the part number when you enquire.

Is this adapter interchangeable with other thread families?

No. NPT is a thread family in its own right and does not interchange with BSP, JIC, NPT, metric or ORFS. Where you need to cross between families, use the adapter built for that pair rather than forcing a thread that nearly fits.

Do I need to crimp this onto a hose?

No. These are tube and port adapters, not hose ends — they thread into a port or join two threaded ends. For a hose assembly use Indus crimp ferrules with the matching Indus hose-end fitting.

Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST. Less-common combinations ship within 7 working days of RFQ confirmation; say if it is a plant-down job and we will prioritise it.

INDUS HYDRAULICSIH-AD-NPT-021

NPT Female Tee

Name: NPT Female Tee
Brand: Indus Hydraulics
SKU: IH-AD-NPT-021

NPT AdaptersEx-stock · delivery in 3 days

VIEW 01·NPT female tee, female tapered thread with one male branch, forged steel

NPT Female Tee — NPT adapter, tee body, 9 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.

Key features

Body Configuration: tee
Port A Thread: NPT 1/8-27 to 2-11.5
Port A Sealing: NPT taper thread
Nominal Size Range: -02 to -32
Max Working Pressure: up to 345 bar (5,004 psi), manufacturer stated

Body Configuration: tee
Port A Thread: NPT 1/8-27 to 2-11.5
Port A Sealing: NPT taper thread
Nominal Size Range: -02 to -32
Max Working Pressure: up to 345 bar (5,004 psi), manufacturer stated

Enquire on WhatsApp Email for a quotation

Ships in 24h

Order before 14:00 GST · Jebel Ali

24-month warranty

Manufacturer-backed · genuine parts

Engineering support

A real applications engineer

Product description

The NPT Female Tee is a tee hydraulic adapter in the Indus NPT range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions, the weight and the working pressure.

Construction

Body configuration: tee
Port A: NPT Female
Material: carbon steel (stainless steel available on request)
Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant

Threads

Port A: NPT 1/8-27 to 2-11.5
Port B: NPT 1/8-27 to 2-11.5
Port C: NPT 1/8-27 to 2-11.5

Sealing

NPT taper thread. Match the seat as well as the thread — a thread that engages against the wrong seat will weep under pressure, and several of these families share a thread while sealing differently.

Performance

The manufacturer states 70 to 345 bar depending on size, printed against every size in the table. That is the rating of the adapter; an assembly is limited by whichever component is rated lowest — the hose, the tube or the port.

Applicable standards

ANSI/ASME B1.20.1.

How to order

Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.

Companion products

These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.

Identification

Parameter	Value
Body Configuration	tee

Port A

Parameter	Value
Port A Thread	NPT 1/8-27 to 2-11.5
Port A Sealing	NPT taper thread
Port A Gender	female

Port B

Parameter	Value
Port B Thread	NPT 1/8-27 to 2-11.5
Port B Sealing	NPT taper thread
Port B Gender	female

Port C

Parameter	Value
Port C Thread	NPT 1/8-27 to 2-11.5

Dimensions

Parameter	Value
Nominal Size Range	-02 to -32

Performance

Parameter	Value
Max Working Pressure	up to 345 bar (5,004 psi), manufacturer stated

Construction

Parameter	Value
Material	Carbon steel (stainless on request)
Surface Treatment	Zinc-plated, Cr3+ passivated, RoHS-compliant

Compliance

Parameter	Value
Applicable Standards	ANSI/ASME B1.20.1

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Sizes & part numbers

9 sizes

Indus part no.	End 1	End 2	End 3	S1 (mm)	L1 (mm)	L2 (mm)	L3 (mm)	Weight (g)	Working pressure (bar)
IH-AD-NPT-021-02	NPT1/8"X27	NPT1/8"X27	NPT1/8"X27	16	20	20	20	48	345
IH-AD-NPT-021-04	NPT1/4"X18	NPT1/4"X18	NPT1/4"X18	19	22.5	22.5	22.5	61	210
IH-AD-NPT-021-06	NPT3/8"X18	NPT3/8"X18	NPT3/8"X18	24	26	26	26	112	210
IH-AD-NPT-021-08	NPT1/2"X14	NPT1/2"X14	NPT1/2"X14	27	31	31	31	133	210
IH-AD-NPT-021-12	NPT3/4"X14	NPT3/4"X14	NPT3/4"X14	33	34	34	34	194	170
IH-AD-NPT-021-16	NPT1"X11.5	NPT1"X11.5	NPT1"X11.5	41	42	42	42	365	140
IH-AD-NPT-021-20	NPT1.1/4"X11.5	NPT1.1/4"X11.5	NPT1.1/4"X11.5	50	48	48	48	530	80
IH-AD-NPT-021-24	NPT1.1/2"X11.5	NPT1.1/2"X11.5	NPT1.1/2"X11.5	60	53	53	53	1027	70
IH-AD-NPT-021-32	NPT2"X11.5	NPT2"X11.5	NPT2"X11.5	70	62	62	62	1202	70

End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 3 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. L3 — Dimension L3 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.

Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.

Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de: NPT Innengewinde T-Stück
fr: femelle NPT té
es: hembra NPT te
it: femmina NPT raccordo a T

From the blog

Written about this range

Failure analysis

Using sealant on hydraulic threads: which joints want it, and which are ruined by it

Tape on a tapered thread is correct. Tape on a cone, a flat face or an O-ring boss is how a good joint is made to leak — and how debris gets into the system.

3 min read

Specification & standards

Stopping an NPT leak: tape, sealant, or neither

A tapered thread seals on the thread itself, which is why it needs help. Every other connector on the machine seals somewhere else, which is why putting tape on it makes the leak worse.

6 min read

Thread & fitting identification

NPT, NPSM and SAE hose fittings: taper, swivel, flare and O-ring boss

Five American hose-end families that get confused because they share inch sizes. Which seals on the thread, which on a cone, which on an O-ring — and how to tell NPT from NPSM before it leaks.

4 min read

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at

IH-ST-1406

NPT Female Tee

Key features

Product description

Construction

Threads

Sealing

Performance

Applicable standards

How to order

Companion products

Identification

Port A

Port B

Port C

Dimensions

Performance

Construction

Compliance

Shipping & lead time

Sizes & part numbers

Written about this range

Using sealant on hydraulic threads: which joints want it, and which are ruined by it

Stopping an NPT leak: tape, sealant, or neither

NPT, NPSM and SAE hose fittings: taper, swivel, flare and O-ring boss

Engineers viewing this also looked at

Steel NPSM Female Swivel Union

Steel NPTF Female × NPSM Female Swivel 90° Elbow

Steel NPTF Male × NPSM Female Swivel 45° Elbow

Steel NPTF Female × NPSM Female Swivel 45° Elbow

Steel NPTF Male × NPSM Female Swivel Branch Tee

Steel NPSM Female Swivel × NPTF Female Branch Tee

Steel NPSM Female Swivel Union Tee

Steel NPT Seamless Pipe Nipple