45° Female Swivel Connector JIC

45° Female Swivel Connector JIC — JIC family straight for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: straight
- Port A Thread: JIC 37° UN/UNF (7/16-20 to 1-7/8-12)
- Port A Sealing: 37-cone
- Nominal Size Range: -04 to -32 (1/4" to 2")
- Max Working Pressure: up to 350 bar (5000 psi)
- Body Configuration
- straight
- Port A Thread
- JIC 37° UN/UNF (7/16-20 to 1-7/8-12)
- Port A Sealing
- 37-cone
- Nominal Size Range
- -04 to -32 (1/4" to 2")
- Max Working Pressure
- up to 350 bar (5000 psi)
Product description
The 45° Female Swivel Connector JIC is a Straight hydraulic adapter in the JIC family. 45° Female Swivel Connector JIC — JIC family straight for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: Straight
- Port A: Female swivel — JIC 37° UN/UNF (7/16-20 to 1-7/8-12) (37° cone (JIC))
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
up to 350 bar (5000 psi). JIC family — SAE J514 / ISO 8434-2 — 37° cone seat with UN/UNF threads. The dominant North-American hydraulic adapter family. Metal-on-metal seal, no soft seal needed.
Applicable Standards
- SAE J514
- ISO 8434-2
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | straight |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | JIC 37° UN/UNF (7/16-20 to 1-7/8-12) |
| Port A Sealing | 37-cone |
| Port A Gender | female-swivel |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -04 to -32 (1/4" to 2") |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | up to 350 bar (5000 psi) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J514, ISO 8434-2 |
Shipping & lead time
What is the 45° Female Swivel Connector JIC and where is it used?▾
What do I need to quote to order the 45° Female Swivel Connector JIC?▾
How does the 45° Female Swivel Connector JIC differ from the 45° Swivel Connector m JIC X f JIC?▾
What sizes does the 45° Female Swivel Connector JIC come in?▾
How do I pick the correct 45° Female Swivel Connector JIC for my line?▾
What is the working pressure of the 45° Female Swivel Connector JIC?▾
What is the 45° Female Swivel Connector JIC made from, and is stainless available?▾
Which standards does the 45° Female Swivel Connector JIC follow?▾
What mates with the 45° Female Swivel Connector JIC?▾
How should I fit and seal the 45° Female Swivel Connector JIC?▾
What is the country of origin of the 45° Female Swivel Connector JIC?▾
Do you stock the 45° Female Swivel Connector JIC in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Thread & fitting identification
Thread size and pitch, by family: the reference table for the bench
JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.
6 min read
Buying fittings & adapters
JIC 37° adapters: the shapes, sizes, ratings and how to order the right one
A JIC adapter is defined by three things: its shape, its two ends and its dash size. Get all three in the order and the right part arrives; miss one and you get a JIC × NPT elbow when the port was ORB. The steel 37° range — straights, elbows, tees, crosses, bulkheads, swivels, adjustable port ends, caps and plugs — with Parker’s published ratings by dash size, torque and flats, and a checklist for ordering.
8 min read
Thread & fitting identification
Fittings on American machines: the inch families, and what travels with them
JIC, ORFS, NPT, O-ring boss and split flanges arrive as a set. What each is for, which two are routinely confused, and the mistake that ruins a port rather than a fitting.
3 min read








