Thorburn S95 — Type 321 SS Annular, Unbraided Inner Core

Thorburn S95 Type 321 stainless annular corrugated hose, unbraided inner core. DN 6 to DN 350. Use as a vibration-absorbing connector or as the inner element of a multi-layer assembly.
Key features
- Hose Family: Stainless SS Corrugated
- Core Material: Type 321 SS
- Nominal ID Range: DN 6 (1/4") to DN 350 (14")
- Max Working Pressure: 13 bar
- Hose Family
- Stainless SS Corrugated
- Construction Type
- Annular Corrugated
- Braid Configuration
- Unbraided
- Core Material
- Type 321 SS
- Nominal ID Range
- DN 6 (1/4") to DN 350 (14")
- Max Working Pressure
- 13 bar
Product description
The Thorburn S95 — Type 321 SS Annular, Unbraided Inner Core is a annular corrugated metallic hose in the Stainless SS Corrugated family. Type 321 SS core (unbraided inner hose for bonnet and venting service). Working pressure to 13 bar, operating temperature -200°C to +650°C.
Construction
- Type: Stainless SS Corrugated — Type 321 unbraided annular inner core
- Construction: Annular Corrugated
- Core material: Type 321 SS
- Braid: Unbraided — N/A (Unbraided)
- End fitting material: 316L SS standard; Inconel, Hastelloy, or Monel available for matched-trim service
- Nominal ID range: DN 6 (1/4") to DN 350 (14")
- Bend radius (static): 25 mm minimum
- Bend radius (dynamic): 127 mm minimum
- Weight: ~0.13 kg/m (size-dependent)
Performance
Maximum working pressure 13 bar at the smallest bore (decreases with increasing diameter — refer to the OEM size table for per-size ratings). Minimum burst pressure 52 bar with safety factor 4:1 per ISO 10380. Operating temperature range -200°C to +650°C (continuous service; intermittent excursions evaluated on request). All assemblies hydrotested at 1.5× working pressure with a witness-test certificate available on request.
Applications
- Vibration absorption on rotating equipment
- Inner element of jacketed / armored assemblies
- Pulp & paper bleach plants
- Power-generation flue ducts
Compliance
- ISO 10380:2012 (Corrugated Metal Hoses and Hose Assemblies)
- Pressure Equipment Directive 2014/68/EU Module H
- ASME B31.1, B31.3, Section IX
- NACE MR0175 / ISO 15156 (sour-service compliant trim and fittings)
- CSA B51, CGA-8.1-M86
- EN 10204 3.1 / 3.2 mill test reports on request
How to order
Confirm (a) line working pressure and process medium, (b) operating temperature range, (c) bore size and overall length, (d) end fitting type per side (NPT / BSPP / ANSI 150-1500# RF / DIN PN10-PN40 / sanitary tri-clamp / camlock / butt-weld / etc.), (e) braid configuration (unbraided / single / double / triple — drives pressure rating), (f) any required certifications (ISO 10380, PED Module, ASME conformance, NACE MR0175, CGA / UL / Chlorine Institute). Indus quotes ex-Dubai for stock items and ex-OEM for build-to-order, with mill test reports and pressure-test certificates included.
Companion products
Pair with matched ANSI flange gaskets, hose clamps, and OEM end-fitting hardware. For high-vibration installations, also specify a Lock-Section or Armor-Flex external hose guard. For fire-rated runs, add a Fry-Sil Fire Jacket or Fire Tape covering. For high-cycle or premium-corrosion service, ask about the matched OEM expansion-joint variant of the same alloy and pressure class.
Identification
| Parameter | Value |
|---|---|
| Hose Family | Stainless SS Corrugated |
| Construction Type | Annular Corrugated |
| OEM Part Code | S95 |
Construction
| Parameter | Value |
|---|---|
| Braid Configuration | Unbraided |
| Core Material | Type 321 SS |
| Braid Material | N/A (Unbraided) |
| End Fitting Material | 316L SS standard; Inconel, Hastelloy, or Monel available for matched-trim service |
Dimensions
| Parameter | Value |
|---|---|
| Nominal ID Range | DN 6 (1/4") to DN 350 (14") |
| Bend Radius (Static) | 25 mm |
| Bend Radius (Dynamic) | 127 mm |
| Live Length for Vibration | 102 mm |
| Weight | 0.13 kg/m |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | 13 bar |
| Min Burst Pressure | 52 bar |
| Safety Factor | 4 |
| Min Operating Temperature | -200 °C |
| Max Operating Temperature | 650 °C |
Compliance
| Parameter | Value |
|---|---|
| PED 2014/68/EU Module | Module H |
| ASME Compliance | ASME B31.1, B31.3, Section IX |
| NACE MR0175 / ISO 15156 | yes |
| CGA / UL / Chlorine Institute Certs | CSA B51, CGA-8.1-M86 |
Shipping & lead time
What is the Thorburn S95 hose used for?▾
What does the S95 code mean in the Thorburn S95 hose?▾
What sizes does the Thorburn S95 hose come in?▾
What pressure and temperature can the Thorburn S95 hose take?▾
What is the Thorburn S95 hose made of?▾
Which standards and certificates apply to the Thorburn S95 hose?▾
What do I send to order the Thorburn S95 hose?▾
What bend radius and weight does the Thorburn S95 hose have?▾
Thorburn S95 hose: what is the construction (cover / lining / reinforcement)?▾
Where is the Thorburn S95 hose typically used?▾
How does the Thorburn S95 hose compare with the Thorburn S91?▾
Is the Thorburn S95 hose in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Met-O-Seal
- fr
- Met-O-Seal
- es
- Met-O-Seal
- it
- Met-O-Seal
From the blog
Written about this range
Industrial hose
Corrugated stainless steel hose: core, braid and the pressure each layer adds
A metal hose is a corrugated stainless core that bends, and a braid that holds the pressure. How unbraided, single and double braid compare, annular against helical, and 316L against 321.
5 min read
Industrial hose
Metal hose: a guide to corrugated, braided, exotic-alloy and specialty hose
Where rubber reaches its limit, metal hose takes over: −200 to +650 °C, pressures to 414 bar, and media that attack every elastomer. How it is built, how to choose it, and how not to kill it at installation.
6 min read








