Thorburn LS Series — Lock Section, Carbon Steel

Thorburn LS lock-section interlocked hose in carbon steel — for air, exhaust and dry bulk, and as a protective casing. Not leak-tight unless packed.
Key features
- Hose Family: Specialty Metallic Core
- Core Material: Other
- Nominal ID Range: DN 25 (1") to DN 200 (8")
- Max Working Pressure: 25 bar
- Hose Family
- Specialty Metallic Core
- Construction Type
- Annular Corrugated
- Braid Configuration
- N/A
- Core Material
- Other
- Nominal ID Range
- DN 25 (1") to DN 200 (8")
- Max Working Pressure
- 25 bar
Product description
The Thorburn LS Series lock-section hose in carbon steel is an interlocked metal hose: a single metal strip spirally wound into an S-profile, so each turn locks into the next. It is primarily designed for conveying air, exhaust and dry bulk products, and as a protective casing over other hoses and cables.
Construction and ratings
- Interlocked S-profile strip — flexible, crush-resistant and pull-out resistant.
- Not leak-tight on its own: interlocked hose can be supplied packed for additional leak-proofing.
- Temperature is set by the packing — cotton or elastomer to 180 °F, Pyro-Pak to 1000 °F, hard copper or stainless wire packing to 1200 °F.
Applications
- Engine exhaust and hot-air ducting
- Dust collection, ventilation and fume extraction
- Grain and dry bulk transfer
- Protective casing over hose and cable
How to order
Send the bore, overall length, both end connections, the fluid, its pressure and temperature, and any certification the project needs. We will confirm the build with the maker and quote it.
Identification
| Parameter | Value |
|---|---|
| Hose Family | Specialty Metallic Core |
| Construction Type | Annular Corrugated |
| OEM Part Code | LS-CS |
Construction
| Parameter | Value |
|---|---|
| Braid Configuration | N/A |
| Core Material | Other |
| Braid Material | N/A (Unbraided) |
| End Fitting Material | Carbon steel A105N |
Dimensions
| Parameter | Value |
|---|---|
| Nominal ID Range | DN 25 (1") to DN 200 (8") |
| Bend Radius (Static) | 100 mm |
| Bend Radius (Dynamic) | 0 mm |
| Live Length for Vibration | 0 mm |
| Weight | 1.4 kg/m |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | 25 bar |
| Min Burst Pressure | 100 bar |
| Safety Factor | 4 |
| Min Operating Temperature | -50 °C |
| Max Operating Temperature | 400 °C |
Compliance
| Parameter | Value |
|---|---|
| PED 2014/68/EU Module | None |
| ASME Compliance | ASME B31.3 (where pressure-rated) |
| NACE MR0175 / ISO 15156 | no |
Shipping & lead time
What is the Thorburn LS Series, Lock Section, Carbon Steel used for?▾
What temperature range does the Thorburn LS Series, Lock Section, Carbon Steel cover?▾
What is the Thorburn LS Series, Lock Section, Carbon Steel made of?▾
Thorburn LS Series, Lock Section, Carbon Steel: what standards and certifications are supplied?▾
Thorburn LS Series, Lock Section, Carbon Steel: what sizes are available?▾
What do I send to order the Thorburn LS Series, Lock Section, Carbon Steel?▾
why the Thorburn LS Series, Lock Section, Carbon Steel specialty design?▾
What else should I know about the Thorburn LS Series, Lock Section, Carbon Steel?▾
what protection does the Thorburn LS Series, Lock Section, Carbon Steel core provide?▾
Where is the Thorburn LS Series, Lock Section, Carbon Steel typically used?▾
Is the Thorburn LS Series, Lock Section, Carbon Steel built to order, and what is the delivery?▾
Is the Thorburn LS Series, Lock Section, Carbon Steel in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Met-O-Seal
- fr
- Met-O-Seal
- es
- Met-O-Seal
- it
- Met-O-Seal
From the blog
Written about this range
Industrial hose
Fire sleeves and metal hose guards: what “fire-safe” means, and how interlocked hose differs
A silicone-coated fire sleeve buys a hydraulic hose a few minutes near a furnace; an interlocked metal hose carries dust, exhaust or grain but is not leak-tight; a ball-joint guard protects a hose from impact and molten splash. What the maker’s fire ratings actually say — continuous versus 15-minute versus 30-second — why “fire-safe” on a hose usually borrows a valve standard, and how to choose between lock-section, Smooth-Flex and Armor-Flex.
3 min read
Industrial hose
Metal hose: a guide to corrugated, braided, exotic-alloy and specialty hose
Where rubber reaches its limit, metal hose takes over: −200 to +650 °C, pressures to 414 bar, and media that attack every elastomer. How it is built, how to choose it, and how not to kill it at installation.
6 min read








