Surface Test Tree, Wellhead-Mounted 1502, 15,000 psi, Standard Service
Category image · Flow Iron & WellheadWellhead-mounted surface test tree, 1502 15K standard. Compact 4-valve STT integrated permanently with the production wellhead for routine testing and intervention. Indus interchange.
Key features
- STT Configuration: Wellhead-Mounted STT
- Nominal Size: 5-1/8 in vertical bore
- Working Pressure: 15000 psi
- Pressure Class: 15K
- Service Class: Standard
- STT Configuration
- Wellhead-Mounted STT
- Nominal Size
- 5-1/8 in vertical bore
- Working Pressure
- 15000 psi
- Pressure Class
- 15K
- Service Class
- Standard
- Valve Count
- 4 valves: 1 master, 1 swab, 2 wing
Product description
The Surface Test Tree, Wellhead-Mounted 1502, 15,000 psi, Standard Service is a surface test tree (STT) for wellhead-mounted stt service, 15K class (15,000 psi working pressure), standard rated. Standard service rated for clean hydrocarbon and completion-fluid streams.
Construction
- Configuration: Wellhead-Mounted STT
- Nominal vertical bore: 5-1/8 in vertical bore
- Valves: 4 valves: 1 master, 1 swab, 2 wing
- Valve types: Hydraulic gates (master + wing); manual gate (swab)
- End connections: Top: 1502 Female Weco. Bottom: API 6BX 15K studded (permanent wellhead). Lateral: 2× 1502 Female Weco.
- Hydraulic actuation: 3,000 psi pilot
- Material class: AA
- Temperature class: P
Operation
The STT functions as the primary surface pressure-control barrier during well-stimulation, well-test, coiled-tubing, snubbing, or subsea operations. Master valves provide the primary seal; swab valves enable wireline access; wing (lateral) valves route flow to the choke / flowback iron. Hydraulic actuators allow remote operation from the operator's panel — fail-safe close on hydraulic loss. Conventional frac variants stack above the wellhead frac tree to control flowback pressure during frac stimulation.
Performance
Working pressure 15,000 psi (15K class). Hydrotested at 1.5× shell pressure. Designed and manufactured to API 16C. Each valve hydrotested per API 6A / 16C requirements before assembly.
Applications
- Permanent production-well surface testing
- Wellhead-integrated intervention iron
- Single-well test loops
OEM equivalents and compatibility
This STT is supplied as a recognised matched-spec interchange for the following OEM product lines (no implied authorised-distributor relationship):
- Wellhead STT 15K
- FMC Wellhead Tree
- Cameron Mounted STT
Compliance
- API 16C design and manufacture
- API 6A material class: AA
- API 6A temperature class: P
- EN 10204 3.1 / 3.2 mill test reports
- Hydrostatic body, valve seat, and back-seat test certificates per unit
How to order
Confirm on your RFQ: (a) operation type (frac / coiled-tubing / snubbing / subsea / well-test), (b) target working pressure and pressure class, (c) vertical bore and end-connection requirements (top / bottom / lateral), (d) valve count and types, (e) service class — sour (NACE MR0175) or standard, (f) hydraulic actuation pressure / panel requirements, (g) coiled-tubing pack-off requirement, and (h) certification beyond standard MTRs. Indus quotes ex-Dubai with full FAT (factory acceptance test) report on request.
Companion products
Pair with matched-class wellhead, frac tree, choke manifold, blowdown manifold, hydraulic control panel, hose loops, and pressure-relief lines. For coiled-tubing service, additionally specify pack-off / stripper, BOP stack, and reel iron.
Identification
| Parameter | Value |
|---|---|
| STT Configuration | Wellhead-Mounted STT |
| Valve Count | 4 valves: 1 master, 1 swab, 2 wing |
| Valve Types | Hydraulic gates (master + wing); manual gate (swab) |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size | 5-1/8 in vertical bore |
| End Connections | Top: 1502 Female Weco. Bottom: API 6BX 15K studded (permanent wellhead). Lateral: 2× 1502 Female Weco. |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 15000 psi |
| Pressure Class | 15K |
| Service Class | Standard |
| Hydraulic Actuation Pressure | 3,000 psi pilot |
| Temperature Class (API 6A) | P |
Compliance
| Parameter | Value |
|---|---|
| Material Class (API 6A) | AA |
| API Specification | API 16C |
Shipping & lead time
What is a wellhead-mounted surface test tree rated 15,000 psi used for?▾
What do the 4 valves on the wellhead-mounted surface test tree do?▾
What are the end connections of the wellhead-mounted surface test tree at 15,000 psi?▾
Should I choose the wellhead-mounted 15,000 psi tree or the conventional frac 15,000 psi tree?▾
What are the pressure rating and actuation pressure of the wellhead-mounted 15,000 psi surface test tree?▾
Is the wellhead-mounted 15,000 psi surface test tree standard or sour service, and what is its material class?▾
Which API specification applies to the wellhead-mounted 15,000 psi surface test tree?▾
What does the wellhead-mounted surface test tree connect to?▾
How is the wellhead-mounted 15,000 psi surface test tree operated?▾
How does the wellhead-mounted 15,000 psi tree differ from the conventional frac tree?▾
What is the lead time of the wellhead-mounted 15,000 psi surface test tree and can it be exported from Dubai?▾
Is the Surface Test Tree, Wellhead-Mounted 1502, 15,000 psi, Standard Service available from Indus Hydraulics in Dubai, and what is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog


