Surface Test Tree, Snubbing 1502, 10,000 psi, Standard Service
Category image · Flow Iron & WellheadSnubbing surface test tree, 1502 10K standard. FMC / NOV interchange. Includes dual ram-type stripper for running tubing into a live well under pressure (snubbing).
Key features
- STT Configuration: Snubbing STT
- Nominal Size: 5-1/8 in vertical bore with snubbing stripper
- Working Pressure: 10000 psi
- Pressure Class: 10K
- Service Class: Standard
- STT Configuration
- Snubbing STT
- Nominal Size
- 5-1/8 in vertical bore with snubbing stripper
- Working Pressure
- 10000 psi
- Pressure Class
- 10K
- Service Class
- Standard
- Valve Count
- 6 valves: 2 master, 1 swab, 2 wing, 1 ram-type stripper
Product description
The Surface Test Tree, Snubbing 1502, 10,000 psi, Standard Service is a surface test tree (STT) for snubbing stt service, 10K class (10,000 psi working pressure), standard rated. Standard service rated for clean hydrocarbon and completion-fluid streams.
Construction
- Configuration: Snubbing STT
- Nominal vertical bore: 5-1/8 in vertical bore with snubbing stripper
- Valves: 6 valves: 2 master, 1 swab, 2 wing, 1 ram-type stripper
- Valve types: Hydraulic gates + dual ram-type stripper (snubbing-rated)
- End connections: Top: Snubbing stripper. Bottom: 1502 Female Weco. Lateral: 2× 1502 Female Weco.
- Hydraulic actuation: 3,000 psi pilot; 2,000 psi for stripper rams
- Material class: AA
- Temperature class: P
Operation
The STT functions as the primary surface pressure-control barrier during well-stimulation, well-test, coiled-tubing, snubbing, or subsea operations. Master valves provide the primary seal; swab valves enable wireline access; wing (lateral) valves route flow to the choke / flowback iron. Hydraulic actuators allow remote operation from the operator's panel — fail-safe close on hydraulic loss. Snubbing variants seal around tubing being run into a live well under pressure (snubbing operations).
Performance
Working pressure 10,000 psi (10K class). Hydrotested at 1.5× shell pressure. Designed and manufactured to API 16C. Each valve hydrotested per API 6A / 16C requirements before assembly.
Applications
- Snubbing operations on live wells
- High-pressure tubing-pull-and-run
- Live-well intervention
OEM equivalents and compatibility
This STT is supplied as a recognised matched-spec interchange for the following OEM product lines (no implied authorised-distributor relationship):
- FMC Snubbing STT
- NOV Snubbing Tree
- Halliburton Snubbing
Compliance
- API 16C design and manufacture
- API 6A material class: AA
- API 6A temperature class: P
- EN 10204 3.1 / 3.2 mill test reports
- Hydrostatic body, valve seat, and back-seat test certificates per unit
How to order
Confirm on your RFQ: (a) operation type (frac / coiled-tubing / snubbing / subsea / well-test), (b) target working pressure and pressure class, (c) vertical bore and end-connection requirements (top / bottom / lateral), (d) valve count and types, (e) service class — sour (NACE MR0175) or standard, (f) hydraulic actuation pressure / panel requirements, (g) coiled-tubing pack-off requirement, and (h) certification beyond standard MTRs. Indus quotes ex-Dubai with full FAT (factory acceptance test) report on request.
Companion products
Pair with matched-class wellhead, frac tree, choke manifold, blowdown manifold, hydraulic control panel, hose loops, and pressure-relief lines. For coiled-tubing service, additionally specify pack-off / stripper, BOP stack, and reel iron.
Identification
| Parameter | Value |
|---|---|
| STT Configuration | Snubbing STT |
| Valve Count | 6 valves: 2 master, 1 swab, 2 wing, 1 ram-type stripper |
| Valve Types | Hydraulic gates + dual ram-type stripper (snubbing-rated) |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size | 5-1/8 in vertical bore with snubbing stripper |
| End Connections | Top: Snubbing stripper. Bottom: 1502 Female Weco. Lateral: 2× 1502 Female Weco. |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 10000 psi |
| Pressure Class | 10K |
| Service Class | Standard |
| Hydraulic Actuation Pressure | 3,000 psi pilot; 2,000 psi for stripper rams |
| Temperature Class (API 6A) | P |
Compliance
| Parameter | Value |
|---|---|
| Material Class (API 6A) | AA |
| API Specification | API 16C |
Shipping & lead time
What is a snubbing surface test tree rated 10,000 psi used for?▾
What do the 6 valves on the snubbing surface test tree do?▾
What are the end connections of the snubbing surface test tree at 10,000 psi?▾
Should I choose the snubbing 10,000 psi tree or the conventional frac 10,000 psi tree?▾
What are the pressure rating and actuation pressure of the snubbing 10,000 psi surface test tree?▾
Is the snubbing 10,000 psi surface test tree standard or sour service, and what is its material class?▾
Which API specification applies to the snubbing 10,000 psi surface test tree?▾
What does the snubbing surface test tree connect to?▾
How is the snubbing 10,000 psi surface test tree operated?▾
How does the snubbing 10,000 psi tree differ from the conventional frac tree?▾
Where is the snubbing 10,000 psi surface test tree made and what is its lead time?▾
Is the Surface Test Tree, Snubbing 1502, 10,000 psi, Standard Service available from Indus Hydraulics in Dubai, and what is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog


