Stainless Steel DIN 2353 × NPT Male 90° Elbow, Heavy Series
Stainless Steel DIN 2353 × NPT Male 90° Elbow, Heavy Series in stainless steel, forged. 9 part numbers, 6 mm to 30 mm tube; the size table gives the size on each end and dimensions in millimetres for every Indus part number.
Key features
- Body Configuration: 90° male elbow
- Port A Thread: DIN 2353 24° cone, M14×1.5 (6 mm tube) to M42×2.0 (30 mm tube)
- Port A Sealing: 24° cone tube end with a cutting ring and nut that bite into the tube
- Nominal Size Range: 6 mm to 30 mm tube
- Body Configuration
- 90° male elbow
- Port A Thread
- DIN 2353 24° cone, M14×1.5 (6 mm tube) to M42×2.0 (30 mm tube)
- Port A Sealing
- 24° cone tube end with a cutting ring and nut that bite into the tube
Product description
The Stainless Steel DIN 2353 × NPT Male 90° Elbow, Heavy Series is a 90° male elbow in stainless steel, forged from one piece. It carries a DIN 2353 24° cone male end and an NPT male end. Stainless steel is chosen where corrosion rules out zinc-plated carbon steel: offshore and marine lines, chemical, fertiliser and petroleum plant, and food, beverage and pharmaceutical process equipment.
Construction
- Body: 90° male elbow
- End 1: DIN 2353 24° cone male
- End 2: NPT male
- Material: stainless steel, forged
Ends and sealing
- DIN 2353 24° cone: 24° cone tube end with a cutting ring and nut that bite into the tube; DIN 2353 / ISO 8434-1.
- NPT: taper pipe thread that seals on the thread flanks, with sealant or tape; ASME B1.20.1.
Sizes
9 part numbers, 6 mm to 30 mm tube. The Sizes & Part Numbers tab lists the size on each end and dimensions in millimetres for every one.
- End 1: M14×1.5 (6 mm tube) to M42×2.0 (30 mm tube)
- End 2: 1/4" NPT (1/4-18) to 1-1/4" NPT (1-1/4-11.5)
Pressure rating
The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the thread or tube size on each end and the material, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | 90° male elbow |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | DIN 2353 24° cone, M14×1.5 (6 mm tube) to M42×2.0 (30 mm tube) |
| Port A Sealing | 24° cone tube end with a cutting ring and nut that bite into the tube |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | NPT, 1/4" to 1-1/4" (1/4-18 to 1-1/4-11.5) |
| Port B Sealing | taper pipe thread that seals on the thread flanks, with sealant or tape |
| Port B Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 6 mm to 30 mm tube |
Construction
| Parameter | Value |
|---|---|
| Material | stainless steel, forged |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | DIN 2353, ISO 8434-1, ASME B1.20.1 |
Shipping & lead time
Sizes & part numbers
9 sizes| Indus part no. | End 1 | End 2 | Tube O.D. (mm) |
|---|---|---|---|
| IH-SS-5070S-06-04 | M14×1.5 (6 mm tube) | 1/4" NPT (1/4-18) | 6 |
| IH-SS-5070S-08-04 | M16×1.5 (8 mm tube) | 1/4" NPT (1/4-18) | 8 |
| IH-SS-5070S-10-06 | M18×1.5 (10 mm tube) | 3/8" NPT (3/8-18) | 10 |
| IH-SS-5070S-12-06 | M20×1.5 (12 mm tube) | 3/8" NPT (3/8-18) | 12 |
| IH-SS-5070S-14-08 | M22×1.5 (14 mm tube) | 1/2" NPT (1/2-14) | 14 |
| IH-SS-5070S-16-08 | M24×1.5 (16 mm tube) | 1/2" NPT (1/2-14) | 16 |
| IH-SS-5070S-20-12 | M30×2.0 (20 mm tube) | 3/4" NPT (3/4-14) | 20 |
| IH-SS-5070S-25-16 | M36×2.0 (25 mm tube) | 1" NPT (1-11.5) | 25 |
| IH-SS-5070S-30-20 | M42×2.0 (30 mm tube) | 1-1/4" NPT (1-1/4-11.5) | 30 |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Tube O.D. — Outside diameter of the tube the port is cut for. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Adapter 90° Bogen NPT auf NPT Außengewinde
- fr
- adaptateur coude 90° NPT sur NPT mâle
- es
- adaptador codo 90° NPT a NPT macho
- it
- adattatore gomito 90° NPT a NPT maschio
Engineers viewing this also looked at
Stainless Steel DIN 2353 Union Tee, Light Series
Stainless Steel DIN 2353 Union Tee, Extra-Light Series
Stainless Steel DIN 2353 Union Tee, Heavy Series
Stainless Steel DIN 2353 Union Cross, Light Series
Stainless Steel DIN 2353 Union Cross, Heavy Series
Stainless Steel DIN 2353 Tube Nut, Light Series
Stainless Steel DIN 2353 Tube Nut, Extra-Light Series
