SAE counter-flange — SS316L stainless-steel SAE J518 4-bolt flange fitting. Passivated 316L for chemical, marine, and food-grade hydraulic service.
The SAE counter-flange is a SS316L stainless-steel SAE J518 4-bolt flange fitting. Manufactured from 316L (austenitic, low-carbon, marine-grade) stainless steel and passivated — ideal for chemical, marine, food-grade, and pharmaceutical hydraulic service where carbon-steel fittings would corrode.
Working pressure: L-series 210 bar (3000 psi); S-series 415 bar (6000 psi). Operating temperature -40°C to +200°C (limited by O-ring face seal). Sealed by an O-ring under the flange head — pair with the matching SS316L O-ring set for fully stainless assembly. 316L resists chloride pitting, marine atmosphere, dilute mineral acids, and food-grade cleaning chemistry.
Specify (a) the SAE flange port size on the equipment side, (b) the matching SS316L split-flange clamps with stainless bolts (also available from Indus), and (c) for hose assemblies the host hose grade and overall length. Indus crimps and pressure-tests the assembly on request.
Pair with Indus SS316L Split Flange Clamps in the matching SAE code (61 or 62), the SS316L O-ring face seal, and the appropriate SS316L crimp ferrule for the host hose grade.
| Parameter | Value |
|---|---|
| Flange Type | split-clamp |
| SAE J518 Code | code-62 |
| Configuration | clamp-only |
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/2" to 2" |
| Parameter | Value |
|---|---|
| Max Working Pressure | L-series 210 bar (3000 psi); S-series 415 bar (6000 psi) |
| Parameter | Value |
|---|---|
| Bolt Pattern | SAE J518 4-bolt counter-flange (mating piece for SAE flange head) |
| Material | 316L stainless steel (austenitic, low-carbon, marine grade) |
| Surface Treatment | Passivated 316L (no plating; native corrosion-resistant oxide layer) |
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J518, ISO 6162 |