Resilient Seated Gate Valve, Ductile Iron, NRS and OS&Y

Resilient-seated (rubber-encapsulated wedge) gate valves, NRS or OS&Y: DN40 to DN1200, PN10 to PN25 and Class 125/150, full flat bore, drip-tight, face-to-face to BS 5163, DIN F4 or F5.
Key features
- Valve type: Gate valve, resilient seated, waterworks
- Construction: EPDM-encapsulated wedge, NRS or OS&Y
- Design standard: BS 5163, EN 1171, AWWA C509/C515
- Size range: DN40 to DN1200 (1-1/2" to 48")
- Pressure class: PN10, PN16, PN25; Class 125/150
- Body material: Ductile iron, cast iron; carbon steel, stainless steel, duplex and super duplex on request
- End connections: Flanged to EN 1092-2 or ASME B16.1 / B16.5, RF or FF
- Operation: Handwheel, cap top, gearbox, pneumatic or electric actuator
- End connections
- Flanged to EN 1092-2 or ASME B16.1 / B16.5, RF or FF
- Valve type
- Gate valve, resilient seated, waterworks
- Design standard
- BS 5163, EN 1171, AWWA C509/C515
- Pressure class
- PN10, PN16, PN25; Class 125/150
- Operation
- Handwheel, cap top, gearbox, pneumatic or electric actuator
Product description
The standard isolation valve for municipal water, fire mains and building services. The ductile iron wedge is fully encapsulated in EPDM, so it seals drip-tight against a smooth body without a seat groove, and the full, flat-bottomed bore leaves nowhere for grit to collect or the line to be restricted.
Waterworks valves are built for water: ductile iron bodies coated inside and out with fusion-bonded epoxy, EPDM seals and linings suitable for drinking water, stainless fasteners, and flanges drilled to EN 1092 or ASME so they bolt straight into municipal and industrial pipework.
Construction
- EPDM-encapsulated ductile iron wedge
- Full flat-bottom bore: no seat recess
- Non-rising stem (NRS) or OS&Y; O-ring stem seals
- Fusion-bonded epoxy coating; drinking-water approved materials
Sizes and ratings
Published range: DN40 to DN1200 (1-1/2" to 48"), PN10, PN16, PN25; Class 125/150, in ductile iron, cast iron; carbon steel, stainless steel, duplex and super duplex on request. End connections: Flanged to EN 1092-2 or ASME B16.1 / B16.5, RF or FF. Operation: handwheel, cap top, gearbox, pneumatic or electric actuator.
Dimensions depend on the size, rating and options chosen; the general arrangement drawing comes with the quotation.
Testing and documents
Shell and seat tests to EN 12266-1 / API 598, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Resilient gate valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other waterworks valves in the range, for comparison when the duty is not settled yet: Swing Check Valve, Resilient or Metal Seated, Ductile Iron, Flexible (Rubber Flapper) Check Valve, Ductile Iron, Ball Check Valve, Ductile Iron, for Wastewater, Silent (Nozzle) Check Valve, Ductile Iron.
Materials
| Parameter | Value |
|---|---|
| Body material | Ductile iron, cast iron; carbon steel, stainless steel, duplex and super duplex on request |
Construction
| Parameter | Value |
|---|---|
| End connections | Flanged to EN 1092-2 or ASME B16.1 / B16.5, RF or FF |
| Operation | Handwheel, cap top, gearbox, pneumatic or electric actuator |
Standards
| Parameter | Value |
|---|---|
| Pressure testing | Shell and seat tests to EN 12266-1 / API 598 |
| Design standard | BS 5163, EN 1171, AWWA C509/C515 |
| Face-to-face / end-to-end | BS 5163; EN 558 series 14 (DIN F4) and 15 (DIN F5) |
Identification
| Parameter | Value |
|---|---|
| Valve type | Gate valve, resilient seated, waterworks |
| Construction | EPDM-encapsulated wedge, NRS or OS&Y |
Range
| Parameter | Value |
|---|---|
| Size range | DN40 to DN1200 (1-1/2" to 48") |
| Pressure class | PN10, PN16, PN25; Class 125/150 |
Application
| Parameter | Value |
|---|---|
| Typical service | Drinking water, fire mains, irrigation, HVAC |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
Sizes & part numbers
362 sizes- Indus part no.IH-PV-WGR-NB-125-150-0150
- Type
- NRS, BS 5163
- Size
- 1-1/2"
- DN
- 40
- Class
- Class 125/150
- L (RF) (mm)
- 165
- H (mm)
- 220
- W (mm)
- 200
- Indus part no.IH-PV-WGR-NB-125-150-0200
- Type
- NRS, BS 5163
- Size
- 2"
- DN
- 50
- Class
- Class 125/150
- L (RF) (mm)
- 178
- H (mm)
- 220
- W (mm)
- 200
- Indus part no.IH-PV-WGR-NB-125-150-0250
- Type
- NRS, BS 5163
- Size
- 2-1/2"
- DN
- 65
- Class
- Class 125/150
- L (RF) (mm)
- 190
- H (mm)
- 255
- W (mm)
- 200
- Indus part no.IH-PV-WGR-NB-125-150-0300
- Type
- NRS, BS 5163
- Size
- 3"
- DN
- 80
- Class
- Class 125/150
- L (RF) (mm)
- 203
- H (mm)
- 280
- W (mm)
- 250
- Indus part no.IH-PV-WGR-NB-125-150-0400
- Type
- NRS, BS 5163
- Size
- 4"
- DN
- 100
- Class
- Class 125/150
- L (RF) (mm)
- 229
- H (mm)
- 310
- W (mm)
- 250
- Indus part no.IH-PV-WGR-NB-125-150-0500
- Type
- NRS, BS 5163
- Size
- 5"
- DN
- 125
- Class
- Class 125/150
- L (RF) (mm)
- 254
- H (mm)
- 350
- W (mm)
- 315
- Indus part no.IH-PV-WGR-NB-125-150-0600
- Type
- NRS, BS 5163
- Size
- 6"
- DN
- 150
- Class
- Class 125/150
- L (RF) (mm)
- 267
- H (mm)
- 400
- W (mm)
- 315
- Indus part no.IH-PV-WGR-NB-125-150-0800
- Type
- NRS, BS 5163
- Size
- 8"
- DN
- 200
- Class
- Class 125/150
- L (RF) (mm)
- 292
- H (mm)
- 530
- W (mm)
- 315
Show all 362 sizesShow fewer sizes
Type — Valve type of this row, where one listing covers several. Size — Nominal pipe size (NPS), as published. DN — Nominal diameter (DN), as published. Class — Pressure class or working pressure the row is built to (ASME Class, PN or psi), as published. L (RF) — Face-to-face length with raised-face flanged ends, as published. H — Dimension H on the manufacturer dimension drawing. W — Dimension W on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Lengths are in millimetres and weights in kilograms, as published for each size and class. The end connection, trim, seat and operator you order can change the length and weight, so we confirm the general arrangement drawing with the quotation.
What is the Resilient Seated Gate Valve, Ductile Iron, NRS and OS&Y and what is it used for?▾
How do I read the part numbers in the resilient seated gate valve size table, such as IH-PV-WGR-NB-125-150-0150?▾
What sizes and pressure classes does the Resilient Seated Gate Valve, Ductile Iron, NRS and OS&Y come in?▾
What are the face-to-face lengths of the resilient seated gate valve in the size table?▾
What pressure and temperature is the Resilient Seated Gate Valve, Ductile Iron, NRS and OS&Y rated for?▾
What materials is the Resilient Seated Gate Valve, Ductile Iron, NRS and OS&Y made from?▾
What standards does the Resilient Seated Gate Valve, Ductile Iron, NRS and OS&Y meet and what documents come with it?▾
What end connections and operator options does the Resilient Seated Gate Valve, Ductile Iron, NRS and OS&Y have?▾
Is the resilient seated gate valve suitable for drinking water, and can it be buried?▾
What is the resilient seated gate valve used for?▾
How does the resilient seated gate valve differ from the metal seated gate valve?▾
Can I get the Resilient Seated Gate Valve, Ductile Iron, NRS and OS&Y supplied from Dubai, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








