Resilient Dual Plate Check Valve, Wafer, DN50 to DN2000

Wafer-type resilient-seated dual plate check valves: DN50 to DN2000, PN10/16 and Class 125/150, torsion springs, short and light, reduce water hammer.
Key features
- Valve type: Check valve, dual plate, wafer, waterworks
- Construction: Twin spring-loaded plates, resilient seat
- Design standard: EN 12334, API 594 pattern
- Size range: DN50 to DN2000 (2" to 80")
- Pressure class: PN10, PN16; Class 125/150
- Body material: Ductile iron, cast iron; carbon steel, stainless steel, duplex and super duplex on request
- End connections: Flanged to EN 1092-2 or ASME B16.1 / B16.5, RF or FF
- Operation: Self-acting, spring assisted
- End connections
- Flanged to EN 1092-2 or ASME B16.1 / B16.5, RF or FF
- Valve type
- Check valve, dual plate, wafer, waterworks
- Design standard
- EN 12334, API 594 pattern
- Pressure class
- PN10, PN16; Class 125/150
- Operation
- Self-acting, spring assisted
Product description
The space-saving non-return valve for water mains, cooling water and HVAC. Two half-plates close on torsion springs against a resilient seat, faster than a single swing disc, in a wafer body a fraction of the length and weight.
Waterworks valves are built for water: ductile iron bodies coated inside and out with fusion-bonded epoxy, EPDM seals and linings suitable for drinking water, stainless fasteners, and flanges drilled to EN 1092 or ASME so they bolt straight into municipal and industrial pipework.
Construction
- Twin plates on a central shaft with torsion springs
- Resilient seat bonded to the body
- Wafer body between EN 1092 or ASME flanges
- Short face-to-face to EN 558
Sizes and ratings
Published range: DN50 to DN2000 (2" to 80"), PN10, PN16; Class 125/150, in ductile iron, cast iron; carbon steel, stainless steel, duplex and super duplex on request. End connections: Flanged to EN 1092-2 or ASME B16.1 / B16.5, RF or FF. Operation: self-acting, spring assisted.
Dimensions depend on the size, rating and options chosen; the general arrangement drawing comes with the quotation.
Testing and documents
Shell and seat tests to EN 12266-1 / API 598, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Dual plate check valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other waterworks valves in the range, for comparison when the duty is not settled yet: Double Eccentric Butterfly Valve, Ductile Iron, DN50 to DN4000, Concentric Butterfly Valve for Water Treatment, Wafer, Lug or Flanged, Double Orifice Air Release Valve, Types A, B and C, Single Orifice Air Release Valve, Threaded or Flanged.
Materials
| Parameter | Value |
|---|---|
| Body material | Ductile iron, cast iron; carbon steel, stainless steel, duplex and super duplex on request |
Construction
| Parameter | Value |
|---|---|
| End connections | Flanged to EN 1092-2 or ASME B16.1 / B16.5, RF or FF |
| Operation | Self-acting, spring assisted |
Standards
| Parameter | Value |
|---|---|
| Pressure testing | Shell and seat tests to EN 12266-1 / API 598 |
| Design standard | EN 12334, API 594 pattern |
| Face-to-face / end-to-end | EN 558 |
Identification
| Parameter | Value |
|---|---|
| Valve type | Check valve, dual plate, wafer, waterworks |
| Construction | Twin spring-loaded plates, resilient seat |
Range
| Parameter | Value |
|---|---|
| Size range | DN50 to DN2000 (2" to 80") |
| Pressure class | PN10, PN16; Class 125/150 |
Application
| Parameter | Value |
|---|---|
| Typical service | Water mains, cooling water, HVAC |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
What is the Resilient Dual Plate Check Valve, Wafer, DN50 to DN2000 and what is it used for?▾
How do I order the Resilient Dual Plate Check Valve, Wafer, DN50 to DN2000 if there is no size table?▾
What sizes and pressure classes does the Resilient Dual Plate Check Valve, Wafer, DN50 to DN2000 come in?▾
What are the face-to-face length and dimensions of the resilient dual plate check valve?▾
What pressure and temperature is the Resilient Dual Plate Check Valve, Wafer, DN50 to DN2000 rated for?▾
What materials is the Resilient Dual Plate Check Valve, Wafer, DN50 to DN2000 made from?▾
What standards does the Resilient Dual Plate Check Valve, Wafer, DN50 to DN2000 meet and what documents come with it?▾
What end connections and operator options does the Resilient Dual Plate Check Valve, Wafer, DN50 to DN2000 have?▾
Should the dual plate check valve be wafer or flanged?▾
What is the resilient dual plate check valve used for?▾
How does the dual plate check valve differ from the swing check valve?▾
Can I get the Resilient Dual Plate Check Valve, Wafer, DN50 to DN2000 supplied from Dubai, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








