NPT male pipe straight

NPT male pipe straight — SS316 stainless-steel NPT-NPSM hose fitting, straight, male. Passivated 316 for chemical, marine, and food-grade hydraulic service.
Key features
- Fitting Configuration: straight
- Thread Form: NPT taper 1/8" to 2"
- Sealing Form: NPT taper (self-sealing on engagement)
- Nominal Size Range: 1/8" to 2"
- Fitting Configuration
- straight
- Thread Form
- NPT taper 1/8" to 2"
- Sealing Form
- NPT taper (self-sealing on engagement)
- Nominal Size Range
- 1/8" to 2"
Product description
The NPT male pipe straight is a SS316 stainless-steel hydraulic hose fitting in the straight configuration. Manufactured from 316 (austenitic, marine-grade) stainless steel and passivated for native corrosion resistance — ideal for chemical, marine, food-grade, and pharmaceutical hydraulic service where carbon-steel fittings would corrode.
Construction
- Configuration: straight
- Thread form: NPT taper 1/8" to 2"
- Sealing form: NPT taper (self-sealing on engagement)
- Gender: male
- Material: 316 stainless steel (austenitic, marine grade)
- Surface treatment: Passivated 316 (no plating; native corrosion-resistant oxide layer)
Performance
Pressure rating tracks the host hose grade when crimped to the correct diameter. Operating temperature -40°C to +200°C (limited by hose / O-ring material). 316 resists chloride pitting, marine atmosphere, dilute mineral acids, and food-grade cleaning chemistry.
Applicable Standards
- ASME B1.20.1 (NPT)
- ANSI/ASME B1.20.1 (NPSM)
Fitting series in the size table
The part numbers listed are 43-series one-piece crimp fittings in 316 stainless steel, for 1- and 2-wire braided hose (SAE 100R1, 100R2, 100R16 and 100R17). Crimp them with the dies for that series.
How to order
Specify (a) the host hose grade and bore size and (b) the thread size. These are one-piece crimp fittings: the ferrule is part of the fitting, so no separate ferrule is needed. Indus crimps and pressure-tests the assembly on request.
Companion products
Pair with a hose grade the fitting series is made for (see above) for a correctly crimped assembly. Browse the SS316 Fittings sub-section under Hoses & Fittings for matching thread families.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
| Thread Form | NPT taper 1/8" to 2" |
| Sealing Form | NPT taper (self-sealing on engagement) |
| Thread Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/8" to 2" |
Construction
| Parameter | Value |
|---|---|
| Material | 316 stainless steel (austenitic, marine grade) |
| Surface Treatment | Passivated 316 (no plating; native corrosion-resistant oxide layer) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ASME B1.20.1 (NPT), ANSI/ASME B1.20.1 (NPSM) |
Shipping & lead time
Sizes & part numbers
16 sizes- Indus part no.IH-SS-T43-MP-04-02
- Hose bore
- -04 · 1/4"
- End connection
- 1/8" NPT male (1/8-27)
- Indus part no.IH-SS-T43-MP-04-04
- Hose bore
- -04 · 1/4"
- End connection
- 1/4" NPT male (1/4-18)
- Indus part no.IH-SS-T43-MP-04-06
- Hose bore
- -04 · 1/4"
- End connection
- 3/8" NPT male (3/8-18)
- Indus part no.IH-SS-T43-MP-06-04
- Hose bore
- -06 · 3/8"
- End connection
- 1/4" NPT male (1/4-18)
- Indus part no.IH-SS-T43-MP-06-06
- Hose bore
- -06 · 3/8"
- End connection
- 3/8" NPT male (3/8-18)
- Indus part no.IH-SS-T43-MP-06-08
- Hose bore
- -06 · 3/8"
- End connection
- 1/2" NPT male (1/2-14)
- Indus part no.IH-SS-T43-MP-08-06
- Hose bore
- -08 · 1/2"
- End connection
- 3/8" NPT male (3/8-18)
- Indus part no.IH-SS-T43-MP-08-08
- Hose bore
- -08 · 1/2"
- End connection
- 1/2" NPT male (1/2-14)
Show all 16 sizesShow fewer sizes
- Indus part no.IH-SS-T43-MP-10-08
- Hose bore
- -10 · 5/8"
- End connection
- 1/2" NPT male (1/2-14)
- Indus part no.IH-SS-T43-MP-12-12
- Hose bore
- -12 · 3/4"
- End connection
- 3/4" NPT male (3/4-14)
- Indus part no.IH-SS-T43-MP-12-16
- Hose bore
- -12 · 3/4"
- End connection
- 1" NPT male (1-11.5)
- Indus part no.IH-SS-T43-MP-16-12
- Hose bore
- -16 · 1"
- End connection
- 3/4" NPT male (3/4-14)
- Indus part no.IH-SS-T43-MP-16-16
- Hose bore
- -16 · 1"
- End connection
- 1" NPT male (1-11.5)
- Indus part no.IH-SS-T43-MP-20-20
- Hose bore
- -20 · 1-1/4"
- End connection
- 1-1/4" NPT male (1-1/4-11.5)
- Indus part no.IH-SS-T43-MP-24-24
- Hose bore
- -24 · 1-1/2"
- End connection
- 1-1/2" NPT male (1-1/2-11.5)
- Indus part no.IH-SS-T43-MP-32-32
- Hose bore
- -32 · 2"
- End connection
- 2" NPT male (2-11.5)
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is the NPT male pipe straight used for?▾
How do I read the part number IH-SS-T43-MP-04-02 on the NPT male pipe straight?▾
Which sizes does the NPT male pipe straight come in?▾
How do I choose the hose and NPT port sizes for the NPT male pipe straight?▾
What pressure rating does the NPT male pipe straight have?▾
What is the NPT male pipe straight made from, and where does stainless suit it?▾
Which standards does the NPT male pipe straight follow?▾
What does the NPT male pipe straight connect to?▾
How should a stainless NPT male thread be sealed and tightened?▾
NPT male pipe straight or NPSM swivel female 60° cone: how do I choose?▾
Where is the NPT male pipe straight supplied from, and can it be exported from Dubai?▾
Is the NPT male pipe straight in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Thread & fitting identification
NPT, NPSM and SAE hose fittings: taper, swivel, flare and O-ring boss
Five American hose-end families that get confused because they share inch sizes. Which seals on the thread, which on a cone, which on an O-ring — and how to tell NPT from NPSM before it leaks.
4 min read
Buying fittings & adapters
316L stainless hydraulic fittings: what the range covers, and how it behaves differently
BSP, JIC, ORFS, metric, NPT and NPSM, SAE flanges, standpipes and banjos, all in passivated 316L. What each family covers, the pressure and bolting rules on the flanges, and the galling problem.
4 min read



