MannTek Full Flow Ball Valve for Fuel Tankers, One-Way — 2" to 4"

MannTek one-way Full Flow Ball Valve: an aluminium shut-off valve for petrol, diesel and jet fuel on tank trucks, aviation refuellers, mobile fuelling units and containers. Built for maximum flow, 2" to 4", 10 bar, manual or pneumatic. From Indus Hydraulics, authorised MannTek distributor, UAE.
Key features
- Coupling Family: Full Flow Ball Valve
- Coupling Type / Variant: One-way shut-off valve (one inlet, one outlet)
- End A Configuration: BSP or NPT thread, or EN / ANSI / TW / TTMA flange
- End B Configuration: BSP or NPT thread, or EN / ANSI / TW / TTMA flange
- Size Range: 2" (DN 50), 3" (DN 80), 4" (DN 100)
- Working Pressure: 10 bar (MannTek)
- Coupling Family
- Full Flow Ball Valve
- Coupling Type / Variant
- One-way shut-off valve (one inlet, one outlet)
- End A Configuration
- BSP or NPT thread, or EN / ANSI / TW / TTMA flange
- End B Configuration
- BSP or NPT thread, or EN / ANSI / TW / TTMA flange
- Size Range
- 2" (DN 50), 3" (DN 80), 4" (DN 100)
- Working Pressure
- 10 bar (MannTek)
Product description
The MannTek Full Flow Ball Valve is a shut-off valve for fuel handling on tank trucks, aviation refuellers, mobile fuelling units and containers. The one-way valve has one inlet and one outlet and is designed for maximum flow and minimum pressure drop. It handles petrol (gasoline), diesel and jet fuel.
Sizes
2" (DN 50), 3" (DN 80) and 4" (DN 100). Each size is listed with manual, pneumatic double-acting and pneumatic spring-return actuation in the Sizes & Part Numbers tab.
Construction
- Body: aluminium, with no yellow parts (brass or copper alloys) in contact with the fuel
- Seals: FKM or NBR, with low-temperature seals available
- Working pressure: 10 bar (MannTek)
- Threaded (BSP, NPT) or flanged (EN, ANSI, TW, TTMA) connections
- Modular build: a valve body between bolted end flanges, so the connections are chosen per side
Actuation
- Manual, by hand lever
- Pneumatic, double acting: air opens and closes the valve
- Pneumatic, single acting with spring return (one-way valve): air opens it remotely and the spring closes it automatically, for example on loss of power
A two-way version, with one inlet and two outlets, is listed separately.
Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek valves direct from MannTek in Sweden.
Documents
MannTek's operating manual and service instruction for the Full Flow Ball Valve are attached in the Documents tab, as MannTek publishes them, for installation, operation and servicing. Download them before the coupling arrives so the site team has the procedure to hand.
Where it fits
MannTek builds the one-way valve as a single-direction shut-off valve for tank trucks, aviation refuellers, mobile fuelling units and containers: one inlet and one outlet, designed for maximum flow and minimum pressure drop.
How to order
Send the size, one-way or two-way, the actuation, the connection on each side (thread type and size, or flange standard and rating), the seal material and the fuel. We confirm the MannTek order code, price and lead time with the quotation.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Full Flow Ball Valve |
| Coupling Type / Variant | One-way shut-off valve (one inlet, one outlet) |
| Notes | Manual, pneumatic double-acting or pneumatic spring-return actuation. Order code confirmed with the quotation. |
| Manufacturer | MannTek (Mann Teknik AB), Mariestad, Sweden |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | BSP or NPT thread, or EN / ANSI / TW / TTMA flange |
| End B Configuration | BSP or NPT thread, or EN / ANSI / TW / TTMA flange |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 2" (DN 50), 3" (DN 80), 4" (DN 100) |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Aluminium (no yellow parts) |
| Seal / Gasket | FKM, NBR; low-temperature seals available |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 10 bar (MannTek) |
| Flow | Designed for maximum flow and minimum pressure drop (MannTek) |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-MNT-FFBV-1W-M-050
- Description
- Body: aluminium (no yellow parts)
- Nominal size
- 2" (DN 50)
- Mount
- EN, ANSI, TW, TTMA
- Ports
- BSP or NPT
- Action
- Manual (hand lever)
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-FFBV-1W-DA-050
- Description
- Body: aluminium (no yellow parts)
- Nominal size
- 2" (DN 50)
- Mount
- EN, ANSI, TW, TTMA
- Ports
- BSP or NPT
- Action
- Pneumatic, double acting
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-FFBV-1W-SR-050
- Description
- Body: aluminium (no yellow parts)
- Nominal size
- 2" (DN 50)
- Mount
- EN, ANSI, TW, TTMA
- Ports
- BSP or NPT
- Action
- Pneumatic, single acting, spring return
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-FFBV-1W-M-080
- Description
- Body: aluminium (no yellow parts)
- Nominal size
- 3" (DN 80)
- Mount
- EN, ANSI, TW, TTMA
- Ports
- BSP or NPT
- Action
- Manual (hand lever)
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-FFBV-1W-DA-080
- Description
- Body: aluminium (no yellow parts)
- Nominal size
- 3" (DN 80)
- Mount
- EN, ANSI, TW, TTMA
- Ports
- BSP or NPT
- Action
- Pneumatic, double acting
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-FFBV-1W-SR-080
- Description
- Body: aluminium (no yellow parts)
- Nominal size
- 3" (DN 80)
- Mount
- EN, ANSI, TW, TTMA
- Ports
- BSP or NPT
- Action
- Pneumatic, single acting, spring return
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-FFBV-1W-M-100
- Description
- Body: aluminium (no yellow parts)
- Nominal size
- 4" (DN 100)
- Mount
- EN, ANSI, TW, TTMA
- Ports
- BSP or NPT
- Action
- Manual (hand lever)
- Working pressure (bar)
- 10
- Indus part no.IH-MNT-FFBV-1W-DA-100
- Description
- Body: aluminium (no yellow parts)
- Nominal size
- 4" (DN 100)
- Mount
- EN, ANSI, TW, TTMA
- Ports
- BSP or NPT
- Action
- Pneumatic, double acting
- Working pressure (bar)
- 10
Show all 9 sizesShow fewer sizes
- Indus part no.IH-MNT-FFBV-1W-SR-100
- Description
- Body: aluminium (no yellow parts)
- Nominal size
- 4" (DN 100)
- Mount
- EN, ANSI, TW, TTMA
- Ports
- BSP or NPT
- Action
- Pneumatic, single acting, spring return
- Working pressure (bar)
- 10
Description — What this part number is, as the manufacturer lists it. Mount — Mounting flange or pattern, as published. Ports — Port type and size, as published. Action — Single- or double-acting, as published. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the MannTek one-way Full Flow Ball Valve used for?▾
How do I read the MannTek one-way valve part numbers?▾
What sizes does the MannTek one-way ball valve come in?▾
What pressure is the MannTek Full Flow Ball Valve rated for?▾
Which fuels and seals suit the MannTek one-way ball valve?▾
Does MannTek supply manuals for the Full Flow Ball Valve?▾
Does Indus supply test certificates with the MannTek one-way Full Flow Ball Valves?▾
Which connections does the MannTek Full Flow Ball Valve take?▾
Can the one-way valve close if air or power fails?▾
What is the difference between the one-way and the two-way MannTek ball valve?▾
Does Indus buy the MannTek valve direct?▾
Are MannTek one-way Full Flow Ball Valves in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








