Low-Temperature Carbon Steel Pipe — ASTM A333

Seamless carbon steel pipe to ASTM A333 Grades 1, 3 and 6 for low-temperature service, impact tested down to −45 °C for Grade 6, by NPS and schedule under ASME B36.10M. Made to ASTM A333/A333M, ASTM A334/A334M, ASME B36.10M. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.
Key features
- Product type: Low-Temperature Carbon Steel Pipe
- Construction: Seamless, cold drawn or hot finished
- Standards: ASTM A333/A333M, ASTM A334/A334M, ASME B36.10M
- Base tube material: A333 Gr 1; A333 Gr 3 (3.5Ni); A333 Gr 6; A334 Gr 1; A334 Gr 6
- Outside diameter: 21.3–219.1 mm
- Wall thickness: 2.77–23.01 mm
- Product type
- Low-Temperature Carbon Steel Pipe
- Construction
- Seamless, cold drawn or hot finished
- Base tube material
- A333 Gr 1; A333 Gr 3 (3.5Ni); A333 Gr 6; A334 Gr 1; A334 Gr 6
Product description
Seamless carbon steel pipe to ASTM A333 Grades 1, 3 and 6 for low-temperature service, impact tested down to −45 °C for Grade 6, by NPS and schedule under ASME B36.10M. Tube sizes to ASTM A334.
Specification
- A333 Grade 6: C ≤0.30, Mn 0.29–1.06, P/S ≤0.025; 415 MPa tensile, 240 MPa yield, 30%; normalized
- A333 Gr 1/6 Charpy test temperature: -45 to -46 °C (-50 °F)
- A333 Grade 3: 3.18–3.82% Ni; 450 MPa tensile, 240 MPa yield; Charpy around -100 °C
- Equivalence: A333 Gr 1/6 ≈ EN 10216-4 P215NL / P255QL ≈ DIN 17173 TTSt35N
Standards
ASTM A333/A333M, ASTM A334/A334M, ASME B36.10M. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Materials
- Tube: A333 Gr 1; A333 Gr 3 (3.5Ni); A333 Gr 6; A334 Gr 1; A334 Gr 6
Testing and documents
- Charpy V-notch impact test, tensile, flattening, hydro or NDT (E213/E309)
- Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan
Where it is used
- LNG, LPG and ethane lines; cold-service gas-plant piping
Sizes
44 sizes, each under its own Indus part number in the size table. The sizes follow the standard's own table.
Ordering
Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity. We quote with the mill certificates and the inspection you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Low-Temperature Carbon Steel Pipe |
| Construction | Seamless, cold drawn or hot finished |
Compliance
| Parameter | Value |
|---|---|
| Standards | ASTM A333/A333M, ASTM A334/A334M, ASME B36.10M |
Construction
| Parameter | Value |
|---|---|
| Base tube material | A333 Gr 1; A333 Gr 3 (3.5Ni); A333 Gr 6; A334 Gr 1; A334 Gr 6 |
Dimensions
| Parameter | Value |
|---|---|
| Outside diameter | 21.3–219.1 mm |
| Wall thickness | 2.77–23.01 mm |
| Length | Random or fixed lengths; cut to length on request |
| Size table | Standard sizes |
Quality
| Parameter | Value |
|---|---|
| Testing | Charpy V-notch impact test, tensile, flattening, hydro or NDT (E213/E309) |
| Certification | Mill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement |
Application
| Parameter | Value |
|---|---|
| Typical services | LNG, LPG and ethane lines; cold-service gas-plant piping |
Shipping & lead time
Sizes & part numbers
44 sizes- Indus part no.IH-TF-CP-LT-N0050-STDS40
- NPS
- 1/2
- O.D. (mm)
- 21.3
- O.D. (in)
- 0.840
- Schedule
- STD / SCH 40
- Wall (mm)
- 2.77
- Wall (in)
- 0.109
- Indus part no.IH-TF-CP-LT-N0050-XSS80
- NPS
- 1/2
- O.D. (mm)
- 21.3
- O.D. (in)
- 0.840
- Schedule
- XS / SCH 80
- Wall (mm)
- 3.73
- Wall (in)
- 0.147
- Indus part no.IH-TF-CP-LT-N0050-S160
- NPS
- 1/2
- O.D. (mm)
- 21.3
- O.D. (in)
- 0.840
- Schedule
- SCH 160
- Wall (mm)
- 4.78
- Wall (in)
- 0.188
- Indus part no.IH-TF-CP-LT-N0050-XXS
- NPS
- 1/2
- O.D. (mm)
- 21.3
- O.D. (in)
- 0.840
- Schedule
- XXS
- Wall (mm)
- 7.47
- Wall (in)
- 0.294
- Indus part no.IH-TF-CP-LT-N0075-STDS40
- NPS
- 3/4
- O.D. (mm)
- 26.7
- O.D. (in)
- 1.050
- Schedule
- STD / SCH 40
- Wall (mm)
- 2.87
- Wall (in)
- 0.113
- Indus part no.IH-TF-CP-LT-N0075-XSS80
- NPS
- 3/4
- O.D. (mm)
- 26.7
- O.D. (in)
- 1.050
- Schedule
- XS / SCH 80
- Wall (mm)
- 3.91
- Wall (in)
- 0.154
- Indus part no.IH-TF-CP-LT-N0075-S160
- NPS
- 3/4
- O.D. (mm)
- 26.7
- O.D. (in)
- 1.050
- Schedule
- SCH 160
- Wall (mm)
- 5.56
- Wall (in)
- 0.219
- Indus part no.IH-TF-CP-LT-N0075-XXS
- NPS
- 3/4
- O.D. (mm)
- 26.7
- O.D. (in)
- 1.050
- Schedule
- XXS
- Wall (mm)
- 7.82
- Wall (in)
- 0.308
Show all 44 sizesShow fewer sizes
NPS — Nominal pipe size, as the standard publishes it. O.D. (mm) — Outside diameter of the tube or pipe in millimetres. O.D. (in) — The same outside diameter in inches, as the trade orders it. Schedule — Pipe schedule or weight class (STD, XS, XXS), as the standard publishes it. Wall (mm) — Wall thickness in millimetres: minimum or average wall per the governing standard and the order. Wall (in) — The same wall thickness in inches.
These are typical sizes for the range, not a full mill list. Other diameters, walls, fin geometries and lengths are made to order: tell us the standard and grade, the O.D. and wall, and the length you need. Mill test certificates to EN 10204 3.1 are available on request.
What is Low-Temperature Carbon Steel Pipe, ASTM A333 used for?▾
How do I read an Indus part number for Low-Temperature Carbon Steel Pipe, ASTM A333, such as IH-TF-CP-LT-N0050-STDS40?▾
What sizes does Low-Temperature Carbon Steel Pipe, ASTM A333 come in?▾
What do I need to send to order Low-Temperature Carbon Steel Pipe, ASTM A333 to the right size and grade?▾
Which wall schedules do Low-Temperature Carbon Steel Pipe, ASTM A333 come in?▾
Which materials and grades are Low-Temperature Carbon Steel Pipe, ASTM A333 available in?▾
Which standards apply to Low-Temperature Carbon Steel Pipe, ASTM A333?▾
What do Low-Temperature Carbon Steel Pipe, ASTM A333 connect to or fit with?▾
How should Low-Temperature Carbon Steel Pipe, ASTM A333 be inspected on receipt and stored?▾
How does Low-Temperature Carbon Steel Pipe, ASTM A333 differ from High-Temperature Carbon Steel Pipe — ASTM A106?▾
How are Low-Temperature Carbon Steel Pipe, ASTM A333 shipped, and can they be exported from Dubai?▾
Do you keep Low-Temperature Carbon Steel Pipe, ASTM A333 in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog


