Hub & Clamp Connector (Grayloc-style), 5K to 15K Pressure Classes
Category image · Flow Iron & WellheadGrayloc-style hub-and-clamp pressure-rated connector, 5K to 15K classes. The flange-alternative for compact wellhead and process-skid pipework — fast make-and-break, no stud bolts, pressure-energised seal.
Key features
- Flow Iron Type: API Hub & Clamp
- Figure / Pressure Series: 15K
- Working Pressure: 15000 psi
- Service Class: Standard
- Configuration: Hub × Clamp connector pair (Grayloc-style)
- Available Sizes: 2 in, 3 in, 4 in (and bore-equivalent API sizes)
- Flow Iron Type
- API Hub & Clamp
- Figure / Pressure Series
- 15K
- Working Pressure
- 15000 psi
- Pressure Class
- 15K
- Service Class
- Standard
- Configuration
- Hub × Clamp connector pair (Grayloc-style)
Product description
The Hub & Clamp Connector (Grayloc-style), 5K to 15K Pressure Classes is a api hub & clamp (Hub × Clamp connector pair (Grayloc-style)) rated for 15,000 psi working pressure in standard service. Standard service rated for clean hydrocarbon, completion fluid, and water-cut streams.
Construction
- Type: API Hub & Clamp
- Series / class: 15K (15K)
- Configuration: Hub × Clamp connector pair (Grayloc-style)
- End A: Hub (welded or studded)
- End B: Hub (welded or studded)
- Auxiliary: Clamp + Sealing Ring (sold integrated)
- Bore / ID: Same as nominal
- Material: Forged alloy steel (4130/4140), tempered
- Temperature rating: -20°F to 250°F (-29°C to 121°C)
Available sizes
This product family covers the following stock or short-lead nominal sizes: 2 in, 3 in, 4 in (and bore-equivalent API sizes). Other sizes within the same series and pressure class can be sourced from the OEM mill on a build-to-order basis (8–14 weeks lead). Indus quotes a firm size, pressure class, configuration, and service-class match against your inquiry data sheet — call or RFQ with the line specification and we will return a complete matched bill of materials.
Performance
Working pressure 15,000 psi (15K class), standard rated. Manufactured to recognised oilfield frac-iron design standards — pressure-class methodology and hydrostatic testing aligned with API 6A. Hydrostatic test at 1.5× shell pressure on every unit. Mill test reports per EN 10204 3.1 / 3.2 supplied with each shipment.
Applications
- Compact wellhead skid pipework
- Process-plant high-pressure tie-ins
- Subsea / tight-tolerance assemblies
OEM equivalents and compatibility
This product is supplied as a recognised matched-pressure interchange for the following OEM standards and product lines (no implied authorised-distributor relationship — supplied by Indus Hydraulics):
- Grayloc / Oceaneering
- Vector / Cameron
- NOV Hub-Clamp
Compliance
- Recognised oilfield frac-iron design standards (frac-iron pressure-class lineage)
- EN 10204 3.1 / 3.2 mill test reports
- Hydrostatic test certificates per unit
How to order
Confirm on your RFQ: (a) exact nominal size and bore ID, (b) line working pressure and pressure class, (c) end-connection style and gender on each port (M / F, NPT / BW / Integral / RTJ / RF), (d) service class — sour (NACE MR0175) or standard, (e) any additional ports or taps (1/2 in NPT instrument tap, 9/16 in Autoclave, etc.), and (f) required certifications beyond the standard MTR + hydrostatic. Indus quotes ex-Dubai with full traceability.
Companion products
Pair with matched-pressure hammer unions, swivel joints (Chiksan-style 50 / 100 / 200 series), pup joints, integral crosses / tees / elbows, plug valves, ball valves, and check valves of the same WECO figure class. For wellhead and frac-tree integration, also specify API 6A flanges, wellhead adapters, and ring-joint gaskets in the matched pressure class.
Identification
| Parameter | Value |
|---|---|
| Flow Iron Type | API Hub & Clamp |
| Figure / Pressure Series | 15K |
| Configuration | Hub × Clamp connector pair (Grayloc-style) |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 15000 psi |
| Pressure Class | 15K |
| Service Class | Standard |
| Temperature Rating | -20°F to 250°F (-29°C to 121°C) |
Dimensions
| Parameter | Value |
|---|---|
| End Connection (A) | Hub (welded or studded) |
| End Connection (B) | Hub (welded or studded) |
| Additional Ports / Taps | Clamp + Sealing Ring (sold integrated) |
| Available Sizes | 2 in, 3 in, 4 in (and bore-equivalent API sizes) |
| Bore / ID | Same as nominal |
Construction
| Parameter | Value |
|---|---|
| Material | Forged alloy steel (4130/4140), tempered |
Compliance
| Parameter | Value |
|---|---|
| API / Industry Specification | Other (frac-iron lineage) |
| Material Class (API 6A) | N/A |
Shipping & lead time
What is a hub and clamp connector rated 15,000 psi for standard service used for?▾
Which sizes does the Hub & Clamp Connector (Grayloc-style), 5K to 15K Pressure Classes come in?▾
What are the end connections of the Hub & Clamp Connector (Grayloc-style), 5K to 15K Pressure Classes?▾
What is the working pressure of the Hub & Clamp Connector (Grayloc-style), 5K to 15K Pressure Classes?▾
What is the Hub & Clamp Connector (Grayloc-style), 5K to 15K Pressure Classes made from?▾
What standard does the Hub & Clamp Connector (Grayloc-style), 5K to 15K Pressure Classes meet?▾
What does the Hub & Clamp Connector (Grayloc-style), 5K to 15K Pressure Classes connect to?▾
How is the Hub & Clamp Connector (Grayloc-style), 5K to 15K Pressure Classes installed and serviced?▾
Where is the Hub & Clamp Connector (Grayloc-style), 5K to 15K Pressure Classes used?▾
How does the hub and clamp connector 15K 15,000 psi standard differ from similar flow iron?▾
What is the lead time for the Hub & Clamp Connector (Grayloc-style), 5K to 15K Pressure Classes?▾
Do you keep the Hub & Clamp Connector (Grayloc-style), 5K to 15K Pressure Classes in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Hammerverschraubung
- fr
- union à marteau
- es
- unión de martillo
- it
- giunto a martello
From the blog
Written about this range
Oilfield & pressure control
Flow iron explained: pup joints, swivels, fittings, adapters and manifolds on a treating line
The temporary high-pressure line between the pumps and the well is built from a handful of parts joined by hammer unions. What each part does, integral against welded, standard against sour, and what keeps a treating line safe.
9 min read
Drilling rig equipment
Long-sweep manifold fittings: why the end connection sets the rating
A long-sweep tee or ell is a casting, but its working pressure depends on how it is joined to the line. Oteco rates the same casting at 2,000 to 5,000 psi by pipe schedule or thread. How to read the table, choose an end and avoid a weak link.
6 min read






