Skip to content
FERRYLIH-FRY-WRL· MADE IN GERMANY

Ferryl Wire Rope Lubricator

Wire Rope LubricatorsEx-stock · delivery in 3 days
Ferryl Wire Rope Lubricator green aluminium chamber clamped on a steel wire rope, close-up
VIEW 01·Ferryl Wire Rope Lubricator green aluminium chamber clamped on a steel wire rope, close-up
1 / 5

Ferryl Wire Rope Lubricator: an aluminium pressure chamber clamped round the wire that forces grease into the core at up to 400 bar, cleaning and coating in one pass at up to 40 m/min. Wires 1–50 mm; XL to 90 mm.

Key features

  • Product type: Pressure wire rope lubricator (air-driven grease supply)
  • Drive: Compressed air, 0 to 10 bar (via grease pump)
  • Lubricant: Grease, NLGI 0 to 3 — designed around Ferryl 202 Standard
  • Output: Up to 4.5 kg/min grease
  • Max pressure: Up to 400 bar
Product type
Pressure wire rope lubricator (air-driven grease supply)
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Greasing a wire rope by hand coats the outside and little else, and it takes hours on a long mooring or crane wire. The Ferryl Wire Rope Lubricator does the job in one pass: the wire runs through a sealed aluminium chamber filled with grease under high pressure, which drives the grease into the core and pushes water and moisture out. The wire leaves the chamber with an even coat inside and out.

Three steps in one

  • Clean. An optional groove cleaner at the entry of the chamber scrapes off old grease, dirt and debris — Ferryl says up to 90% of it — so the new grease can reach the core.
  • Lubricate the core. Grease enters at up to 400 bar and is forced between the strands.
  • Protect the outside. Scraper plates sized to the wire leave a uniform external coat.

What it changes

Ferryl reports up to 90% less application time than manual greasing and up to 70% less re-greasing, with less waste because grease goes into the wire rather than onto the deck. Because every pass applies the same coat, no step of the maintenance is skipped.

Specification

  • Pressure up to 400 bar; grease output up to 4.5 kg/min; lubrication speed up to 40 m/min.
  • Grease intake NLGI 0 to 3; air supply 0 to 10 bar to the pump.
  • Wire sizes 1 to 50 mm (Lubricator XL: 50 to 90 mm).
  • Anodised aluminium alloy chamber, 450 mm long, 4.5 kg; 6 × 1/2" female BSP connections.

The figures are Ferryl's, measured with Ferryl 202 Standard grease and the Ferryl Pump Unit; other pumps and greases may give different results.

What is in the case

Lubricating chamber, carry case, a set of seals and a set of scraper plates for the wire diameter ordered, a spare seal set, and self-retracting ratchet straps to anchor the chamber. Seals, scraper plates and groove cleaners are made for each wire diameter (and the groove cleaner for the wire construction), so tell us the wire size and construction when you order.

Suitable wires

Crane, hoist and luffing wires, mooring and towing wires, and ramp wires.

Other Ferryl wire rope products

Related

Supply

Indus Hydraulics distributes Ferryl marine maintenance products in the Middle East. Send the product name and pack size, or describe the wire, rail or part you need to protect, and we confirm the product, quantity and delivery.

Identification

ParameterValue
Product typePressure wire rope lubricator (air-driven grease supply)
DriveCompressed air, 0 to 10 bar (via grease pump)
MakerFerryl — made by Ferryl Deutschland GmbH, Germany; Ferryl Sales Ltd, Isle of Man

Application

ParameterValue
LubricantGrease, NLGI 0 to 3 — designed around Ferryl 202 Standard
Wire size1 to 50 mm (XL: 50 to 90 mm)

Performance

ParameterValue
Max pressureUp to 400 bar
OutputUp to 4.5 kg/min grease
Lubrication speedUp to 40 m/min

Connections

ParameterValue
Connections6 × 1/2" female BSP

Construction

ParameterValue
MaterialAnodised aluminium alloy
Length450 mm
Weight4.5 kg

Ordering

ParameterValue
SupplyChamber, carry case, seal set and scraper plates for one wire diameter, spare seal set, ratchet straps

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.
OriginMade in Germany

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at