Demco DM 7500 Gate Valve Gate, 5″
5″ replacement gate for Demco DM 7500 mud gate valves rated 7,500 psi: alloy steel, usually black QPQ-nitrided, Cameron part no. 2171108-01. Supplied new, genuine Cameron or interchangeable, and best replaced together with the seat insert.
Key features
- Valve Type: Repair part — gate
- Nominal Size: 5 in
- Valve Type
- Repair part — gate
- Nominal Size
- 5 in
Product description
A replacement gate for 5″ Demco DM mud gate valves rated 7,500 psi — the sliding closure that shuts off against the seat. The gate and seat wear as a pair, so we usually quote them together, or as a repair kit. We supply new parts: genuine Cameron (Demco) where you need OEM, or interchangeable aftermarket parts made to the same dimensions — say which on the RFQ.
Gates we have photographed at this size
| Make | Valve series | Finish / material | Marking |
|---|---|---|---|
| Demco | DM 7500 | Alloy steel, black finish, 31 HRC | 2171108-01 Rev 02 |
| AC (India, aftermarket) | DM 7500 | Steel, nickel plated | 052115290DQ |
Each row is a gate we have photographed; the series is from its stamp or the supplier's listing, and “Not marked” means neither states it. Black gates are typically QPQ-nitrided alloy steel, the DM 7500 finish; nickel-plated steel is the standard DM 2000–5000 gate.
Demco / Cameron part numbers
| Valve series | Description | Part number |
|---|---|---|
| DM 7500 | Alloy steel | 2171108-01 |
The minimum bore through a 5″ DM 7500 valve (wear ring ID) is 5.17 in, per Cameron's DM 7500 manual.
Also for 5″ DM valves
- Mud Gate Valve, 5″, 7,500 psi — complete valves at this size and rating
- Demco DM 7500 Gate Valve Seat Insert, 5″
Ordering
Give the valve size, series (DM 2000–5000 or DM 7500), trim and elastomer on your RFQ, with the Cameron part number or the number stamped on the old part if you have it, and whether you need OEM or interchangeable parts. We confirm lead time and documentation on the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve Type | Repair part — gate |
| Fits | Demco DM mud gate valves — DM 7500 |
| Makes | Demco, AC (India, aftermarket) |
| Part numbers | 2171108-01 |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size | 5 in |
| Minimum bore (DM 7500 wear ring ID) | 5.17 in |
Performance
| Parameter | Value |
|---|---|
| Pressure Class | 7,500 psi (DM 7500) |
Construction
| Parameter | Value |
|---|---|
| Trim Material | Alloy steel, black finish; Steel, nickel plated |
Shipping & lead time
Which gate fits my 5″ Demco valve?▾
Should the seat be replaced with the gate?▾
Can the gate be changed without taking the valve out of the line?▾
Are these parts supplied new?▾
How do I tell a DM 7500 gate from a DM 2000–5000 gate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this range
Engineers viewing this also looked at
Demco DM 7500 Gate Valve Repair Kit, 2″ — Minor & Major
Demco DM 7500 Gate Valve Repair Kit, 3″ — Minor
Demco DM 7500 Gate Valve Seat Insert, 2″
Demco DM 7500 Gate Valve Seat Insert, 3″
Demco DM 7500 Gate Valve Seat Insert, 5″
Demco DM Gate Valve Gate, 2″
Demco DM Gate Valve Repair Kit, 4″ — 5,000 & 7,500 psi
