Bosch Rexroth A10VSO 100 Variable Axial Piston Pump, 100 cm³/rev

Bosch Rexroth A10VSO 100 series 31: a variable-displacement swashplate axial piston pump for open circuits, 100 cm³/rev, rated 280 bar nominal and 350 bar maximum, up to 2000 rpm at full displacement.
Key features
- Displacement: 100 cm³/rev
- Pressure (peak): 350 bar
Product description
The Bosch Rexroth A10VSO 100 is a variable-displacement axial piston pump of swashplate design for hydrostatic drives in an open circuit. Its flow is proportional to drive speed and displacement, and the displacement changes steplessly with the swashplate angle. Rexroth positions series 31 as its all-purpose medium-pressure pump, in sizes 18 to 100, with good suction behaviour, low noise, long life and short control times.
Ratings, size 100
- Displacement: 100 cm³/rev
- Pressure: 280 bar nominal, 350 bar maximum
- Speed: 2000 rpm at full displacement; 2400 rpm only at reduced displacement with raised inlet pressure; 2300 rpm for the high-speed H version
- Flow (theoretical): 200 L/min at 2000 rpm, 150 L/min at 1500 rpm
- Power (theoretical, 280 bar): 93 kW at 2000 rpm, 70 kW at 1500 rpm
- Torque at 280 bar: 445 Nm
- Weight: about 49.5 kg, or 55.4 kg with a through drive
The type code
A full Rexroth type code reads like A10VSO 100 DR/31R-VPA…: A10VS for the swashplate unit, O for open circuit, 100 for the size, then the control, series 31, the direction of rotation (R clockwise, L counter-clockwise), the seals (V for FKM, the standard), the drive shaft, the mounting flange, the port plate and the through drive. Quote the full code from your pump's nameplate so we supply the same configuration.
- Controls: DG, DR, DFR, DFR1, DRG, ED72, ER72 and DFLR
- Mounting: ISO 3019-2 two-hole flange, Ø125 mm pilot
- Drive shafts: S, 1 1/2 in 17T 12/24DP splined; P, Ø40 mm keyed
- Ports: pressure 1 1/4 in SAE flange (ISO 6162-2 high-pressure series), suction 2 1/2 in SAE flange (ISO 6162-1)
- Through drives: none (N00), or K01, K52, K68, K04, K07 (SAE C), K24, KB2–KB6, K57
Pressure control
With the DR pressure controller the pump runs at full displacement until the set pressure, adjustable from 50 to 280 bar, is reached; it then swivels back and supplies only the flow the circuit takes. Rexroth still calls for a separate relief valve, because pressure control is not overload protection. A through drive can carry a second pump of up to the same size on the same drive.
Fluid and installation
HLP mineral oil to DIN 51524-2; HFA, HFB and HFC fluids need the E version. Operating viscosity 10–400 mm²/s, optimum 16–36 mm²/s, and up to +110 °C at the drain port with FKM seals. Filter to at least ISO 4406 20/18/15. The case drain must run to the reservoir, with case pressure no more than 2 bar absolute; inlet pressure must stay above 0.8 bar absolute.
Ordering
Send the full type code or the Rexroth material number from the nameplate. We supply new pumps and confirm lead time on the quotation.
Hydraulic
| Parameter | Value |
|---|---|
| Displacement | 100 cm³/rev |
| Pressure (peak) | 350 bar |
| Speed (max) | 2000 rpm |
| Pump type | Axial piston, swashplate, variable, open circuit |
| Nominal pressure | 280 bar |
| Flow at 1500 rpm (theoretical) | 150 L/min |
| Controls available | DG, DR, DFR, DFR1, DRG, ED72, ER72, DFLR |
| Fluid | HLP mineral oil (DIN 51524-2); up to +110 °C with FKM seals |
Mechanical
| Parameter | Value |
|---|---|
| Mounting | ISO 3019-2 two-hole flange, Ø125 mm pilot |
| Rotation | Clockwise (R); counter-clockwise (L) to order |
| Weight | 49.5 kg |
| Weight with through drive | 55.4 kg |
Shipping & lead time
What is the Bosch Rexroth A10VSO 100 variable axial piston pump used for?▾
What sizes and part numbers are listed for the Bosch Rexroth A10VSO 100 variable axial piston pump?▾
How do I choose the right size or model of the Bosch Rexroth A10VSO 100 variable axial piston pump?▾
What pressure rating does the Bosch Rexroth A10VSO 100 variable axial piston pump have?▾
Which materials is the Bosch Rexroth A10VSO 100 variable axial piston pump offered in?▾
Which standards apply to the Bosch Rexroth A10VSO 100 variable axial piston pump?▾
Which parts does the Bosch Rexroth A10VSO 100 variable axial piston pump mate with?▾
How do I fit and look after the Bosch Rexroth A10VSO 100 variable axial piston pump?▾
Where is the Bosch Rexroth A10VSO 100 variable axial piston pump used?▾
How does the Bosch Rexroth A10VSO 100 variable axial piston pump differ from the Bosch Rexroth A10VSO 71 variable axial piston pump?▾
What country of origin and HS code apply to the Bosch Rexroth A10VSO 100 variable axial piston pump?▾
Is the Bosch Rexroth A10VSO 100 variable axial piston pump available from stock in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Cylinders, pumps & motors
How to size a hydraulic pump: flow, pressure, drive power and the inlet nobody checks
A pump is sized by the flow the actuators need and the power the drive can give it, and it fails most often on the suction side. The formulas in litres and gallons, worked examples for electric motors, engines and PTOs, line sizing, and the checks that decide whether a pump lasts five years or five weeks.
13 min read
Cylinders, pumps & motors
Hydraulic pump types: gear, vane and piston pumps compared, and how to choose
External gear, internal gear, vane, axial piston and radial piston pumps all move oil by trapping it and pushing it out, and they differ in pressure, noise, efficiency, dirt tolerance and price. How each one works, real ratings from pumps on the shelf, fixed versus variable displacement, and a selection guide.
10 min read






