Skip to content
BIJUR DELIMONIH-BD-OLD-SP

Bijur Delimon Service Parts and Kits for Older Bijur Lubricators

Lubrication Pump Spare PartsEx-stock · delivery in 3 days
Bijur Delimon A3711 brass pump body nut for the V3 lubricator
VIEW 01·Bijur Delimon A3711 brass pump body nut for the V3 lubricator
1 / 3

Bijur Delimon Service Parts and Kits for Older Bijur Lubricators: 13 genuine part numbers for the V3, YP-8, SK-505 and KIB lubricators, including pump elements and pistons, valves and solenoids, and seals and gaskets. Order by Bijur Delimon part number or send the pump type plate. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.

Key features

  • Product type: Lubrication pump spare parts
  • Pump range: Bijur Delimon V3, YP-8, SK-505 and KIB lubricators
  • Fits: SK-505; V3; YP-8; KIB; Bridgeport machine kit
  • Part numbers listed: 13
  • Parts covered: pump elements and pistons; valves and solenoids; seals and gaskets; fittings and tubing; springs and hardware; repair and overhaul kits
Product type
Lubrication pump spare parts
Pump range
Bijur Delimon V3, YP-8, SK-505 and KIB lubricators
SERV
Bijur Delimon V3 lubricator replacement guide
service_manual · EN
↓ Download
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Genuine Bijur Delimon service parts for the V3, YP-8, SK-505 and KIB lubricators: the 13 part numbers Bijur Delimon lists for them, covering pump elements and pistons (3); valves and solenoids (2); seals and gaskets (2); fittings and tubing (2); springs and hardware (2); and repair and overhaul kits (1).

Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine parts and kits direct from the manufacturer, with the maker's parts lists and service documents.

Note: These parts are for older Bijur lubricators — the V3 and YP-8 oil pumps, the SK-505 grease pump and the KIB hand pump — and for two machine kits Bijur Delimon still lists. Where a pump itself is no longer made, Bijur Delimon publishes a replacement guide naming the current pump that fits the same mounting and system; those guides are in the Downloads tab.

What the list covers

  • Pump elements and pistons — 3 part numbers (A3711, A4154, A4198)
  • Valves and solenoids — 2 part numbers (B3833, B3454)
  • Seals and gaskets — 2 part numbers (B3482, B3943)
  • Fittings and tubing — 2 part numbers (19448, B5560)
  • Springs and hardware — 2 part numbers (11060498, 37686)
  • Repair and overhaul kits — 1 part number (S234)
  • Filters and strainers — 1 part number (B2733)

Finding the right part

Start from the pump: its model and part number are on the type plate, and the parts list in its manual or service card (in the Downloads tab) gives the item number of each part. Match that to the Bijur Delimon part number in the table — the For column says which pump or pump version Bijur Delimon lists each part under. If the plate is unreadable, send us a photo of the pump and of the worn part and we identify it with the manufacturer before quoting.

Row descriptions are Bijur Delimon's own, in its shorthand: RES reservoir, ASSY assembly, LLS low-level switch, TBG tubing, ADPT adapter, CONN connector, SP-Kit or ET-Kit spare-part kit, and the thread as published (NPT, BSPP, M-thread).

What wears and what to keep on site

On an electric lubricator the parts that need replacing are the ones that see the lubricant and the weather: the reservoir gasket and filler-cap filter, suction and in-line filters, the relief valve and the pump-element seals, and the level switch and cable glands that keep moisture out of the motor housing. In Gulf plants dust and heat shorten those intervals, so a seal kit, a set of filters and a spare level switch are worth holding on site; a motor or gear pump is an overhaul part, ordered when the pump is opened up.

Documents

Bijur Delimon's replacement guides for this range are in the Downloads tab.

Identification

ParameterValue
Product typeLubrication pump spare parts
Pump rangeBijur Delimon V3, YP-8, SK-505 and KIB lubricators
FitsSK-505; V3; YP-8; KIB; Bridgeport machine kit

Range

ParameterValue
Part numbers listed13
Parts coveredpump elements and pistons; valves and solenoids; seals and gaskets; fittings and tubing; springs and hardware; repair and overhaul kits
Service kits2 kits

Ordering

ParameterValue
Parts documentationV3 lubricator replacement guide; YP-8 lubricator replacement guide; KIB and KIC lubricator replacement guide
OrderingBy Bijur Delimon part number; send the pump type plate if the part number is not known
SupplyGenuine Bijur Delimon, direct from the manufacturer (authorised distributor)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at