Bijur Delimon PM2 Oil Transfer Pump Service Kits

Bijur Delimon PM2 Oil Transfer Pump Service Kits: 5 genuine part numbers for the PM2 1:1 and 3:1 oil transfer pumps, including repair and overhaul kits, valves and solenoids, and filters and strainers. Order by Bijur Delimon part number or send the pump type plate. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.
Key features
- Product type: Lubrication pump service kits
- Pump range: Bijur Delimon PM2 1:1 and 3:1 oil transfer pumps
- Fits: PM2 1:1; PM2 3:1
- Part numbers listed: 5
- Parts covered: repair and overhaul kits; valves and solenoids; filters and strainers; seals and gaskets
- Product type
- Lubrication pump service kits
- Pump range
- Bijur Delimon PM2 1:1 and 3:1 oil transfer pumps
Product description
Genuine Bijur Delimon service parts for the PM2 1:1 and 3:1 oil transfer pumps: the 5 part numbers Bijur Delimon lists for them, covering repair and overhaul kits (2); valves and solenoids (1); filters and strainers (1); and seals and gaskets (1). PM2 air-operated pumps transfer high volumes of oil — mineral, motor, hydraulic, ATF, cutting oil, diesel or kerosene — through short runs with small pressure drops.
Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine parts and kits direct from the manufacturer, with the maker's parts lists and service documents.
What the list covers
- Repair and overhaul kits — 2 part numbers (F735963, F735952)
- Valves and solenoids — 1 part number (F735421)
- Filters and strainers — 1 part number (F735961)
- Seals and gaskets — 1 part number (F735977)
Finding the right part
Start from the pump: its model and part number are on the type plate, and the parts list in its manual or service card (in the Downloads tab) gives the item number of each part. Match that to the Bijur Delimon part number in the table — the For column says which pump or pump version Bijur Delimon lists each part under. If the plate is unreadable, send us a photo of the pump and of the worn part and we identify it with the manufacturer before quoting.
Row descriptions are Bijur Delimon's own, in its shorthand: RES reservoir, ASSY assembly, LLS low-level switch, TBG tubing, ADPT adapter, CONN connector, SP-Kit or ET-Kit spare-part kit, and the thread as published (NPT, BSPP, M-thread).
What wears and what to keep on site
An air-operated barrel pump wears in two places: the air motor (spool, seals and muffler) and the pump tube (foot valve, packings and the high-pressure piston). Bijur Delimon sells both as repair kits by pump ratio, so the ratio on the pump label is what picks the kit. Keep a packing kit and a foot-valve kit for each pump ratio on site, and replace the exhaust muffler whenever the air motor is serviced.
The pump
The complete pumps are on their own page: Bijur Delimon PM2 Oil Transfer Pumps (1:1 and 3:1), with their part numbers, data and documents. When a pump is beyond repair we quote the replacement unit alongside the parts.
Documents
Bijur Delimon's datasheets for this range are in the Downloads tab.
Identification
| Parameter | Value |
|---|---|
| Product type | Lubrication pump service kits |
| Pump range | Bijur Delimon PM2 1:1 and 3:1 oil transfer pumps |
| Fits | PM2 1:1; PM2 3:1 |
Range
| Parameter | Value |
|---|---|
| Part numbers listed | 5 |
| Parts covered | repair and overhaul kits; valves and solenoids; filters and strainers; seals and gaskets |
| Service kits | 5 kits |
Application
| Parameter | Value |
|---|---|
| Pump drive | Compressed air (air motor) |
| Lubricant | Oil |
Ordering
| Parameter | Value |
|---|---|
| Parts documentation | industrial lubrication and barrel pump brochure |
| Ordering | By Bijur Delimon part number; send the pump type plate if the part number is not known |
| Supply | Genuine Bijur Delimon, direct from the manufacturer (authorised distributor) |
Shipping & lead time
Sizes & part numbers
5 sizes- Indus part no.IH-BD-F735961
- Description
- F735961 — KIT MUFFLER & FILTER
- For
- PM2 1:1
- Indus part no.IH-BD-F735963
- Description
- F735963 — KIT MAJOR REPAIR AIR MOTOR
- For
- PM2 1:1
- Indus part no.IH-BD-F735421
- Description
- F735421 — KIT FOOT VALVE
- For
- PM2 3:1
- Indus part no.IH-BD-F735952
- Description
- F735952 — KIT MAJOR REPAIR PUMP PISTON
- For
- PM2 3:1
- Indus part no.IH-BD-F735977
- Description
- F735977 — KIT PACKING
- For
- PM2 3:1
Description — What this part number is, as the manufacturer lists it. For — Pump, or pump version, the maker lists the spare part under.
What are the PM2 Oil Transfer Pump Service Kits and which pumps do they fit?▾
How do I find the right part number for my PM2 1:1 and 3:1 oil transfer pumps?▾
Which parts are included in the PM2 Oil Transfer Pump Service Kits list?▾
Which repair and overhaul kits are listed for the PM2 1:1 and 3:1 oil transfer pumps?▾
Which parts wear on the PM2 1:1 and 3:1 oil transfer pumps, and what should I keep on site?▾
Should I order a kit or single parts for the PM2 1:1 and 3:1 oil transfer pumps?▾
Which manuals and service documents exist for the PM2 1:1 and 3:1 oil transfer pumps?▾
Can you supply the complete pump for the PM2 1:1 and 3:1 oil transfer pumps as well as parts?▾
What do I send if I only have the type plate for my PM2 1:1 and 3:1 oil transfer pumps?▾
Which lubrication system and lubricant does Bijur Delimon list for the PM2 1:1 and 3:1 oil transfer pumps?▾
Which parts page do I use, the PM2 Oil Transfer Pump Service Kits or PM4 Oil Pump Service Kits?▾
Do you stock service parts for the PM2 1:1 and 3:1 oil transfer pumps, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








