Bijur Delimon Manual PDI and Progressive Lubricators (L13, L3, L6P, L100P, Lubri-Trak)

Bijur Delimon Manual PDI and Progressive Lubricators (L13, L3, L6P, L100P, Lubri-Trak): 12 part numbers, for PDI, SLR, Progressive systems; oil, grease; 1L, 0.2L, 0.6L, 1 pint reservoirs. Single-action hand pumps for positive-displacement injector and progressive systems. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.
Key features
- Product type: Manual lubricator
- Series: Bijur Delimon Manual PDI and Progressive Lubricators
- Drive: Manual
- Lubrication system: PDI, SLR, Progressive
- Lubricant: Oil, Grease
- Reservoir: 1L, 0.2L, 0.6L, 1 pint
- Output: 13cc, 3cc, 6cc, 1cc, 0.2-0.5cc/cycle
- Max pressure: 29 psi (2 bar) to 2,031 psi (140 bar)
- Product type
- Manual lubricator
- Drive
- Manual
- Lubrication system
- PDI, SLR, Progressive
- Lubricant
- Oil, Grease
Product description
Single-action hand pumps for positive-displacement injector and progressive systems.
Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.
How it works
The L13 fires fixed-output ZJB, ZMB, ZT and SJM injectors; it has an internal pressure-relief valve and a flow-control valve that vents the line so the injectors reset, with left, right or dual outlets and M10x1, M8x1 or 5/16-24 UNF threads. L6P and L3 serve small PDI systems, L100P a progressive system, and Lubri-Trak carousels.
Range
12 listed part numbers — systems PDI, SLR, Progressive; lubricants Oil, Grease; reservoirs 1L, 0.2L, 0.6L, 1 pint; output 13cc, 3cc, 6cc, 1cc, 0.2-0.5cc/cycle; maximum pressure 29 psi (2 bar) to 2,031 psi (140 bar). The size table gives each part number's data.
Row descriptions are Bijur Delimon's own: LS / LLS level or low-level switch, HLS high-level switch, PG pressure gauge, PS pressure switch, CNTL controller, P&M pump and motor, SLR single-line resistance, PDI positive-displacement injector, PROG progressive. The columns give each part number's published data.
Where it is used
- small machines with a few points
- injector and progressive systems without power
Choosing the lubricator
A manual lubricator suits a machine with a few points or one that needs lubricant only now and then. Choose it on the distribution system (SLR, PDI, progressive or Dualine), the shot per stroke and the reservoir; fill pumps are chosen on the container they fit and the lubricant they move.
Complete systems
A pump is one part of a lubrication system. With it we supply the Bijur Delimon distribution — meter units, injectors, divider valves or Dualine valves — and the tubing, fittings, controllers and monitoring to match, sized to the number of points and the lubricant. Send us the machine and the lubrication points and we propose the full system.
Spare parts
Genuine Bijur Delimon service parts and kits for this range are listed by part number on Bijur Delimon L13 Manual PDI Lubricator Service Parts.
Documents
Bijur Delimon's datasheets, manuals and service sheets for this range are in the Downloads tab.
Identification
| Parameter | Value |
|---|---|
| Product type | Manual lubricator |
| Series | Bijur Delimon Manual PDI and Progressive Lubricators |
| Drive | Manual |
Application
| Parameter | Value |
|---|---|
| Lubrication system | PDI, SLR, Progressive |
| Lubricant | Oil, Grease |
| Viscosity / NLGI range | 32-750 cSt, 30-1500 cSt, 30-3000 cSt, NLGI 1-3 and 1 more |
Performance
| Parameter | Value |
|---|---|
| Reservoir | 1L, 0.2L, 0.6L, 1 pint |
| Output | 13cc, 3cc, 6cc, 1cc, 0.2-0.5cc/cycle |
| Max pressure | 29 psi (2 bar) to 2,031 psi (140 bar) |
Connections
| Parameter | Value |
|---|---|
| Outlet thread | M10X1, 5/16-24, M8X1, 1/8BSPP, 1/8 TUBE |
| Fill connection | FILL CAP, ZERK |
Ordering
| Parameter | Value |
|---|---|
| Supply | Genuine Bijur Delimon, direct from the manufacturer (authorised distributor) |
Shipping & lead time
Sizes & part numbers
12 sizes- Indus part no.IH-BD-25062-1
- Description
- 25062-1 — L13-L 1L PDI M10X1
- System
- PDI
- Lubricant
- Oil 32-750 cSt
- Reservoir
- 1L
- Output
- 13cc
- Max pressure
- 290 psi (20 bar)
- Outlet
- M10X1
- Indus part no.IH-BD-25062-5
- Description
- 25062-5 — L13-L 1L PDI 5/16-24
- System
- PDI
- Lubricant
- Oil 32-750 cSt
- Reservoir
- 1L
- Output
- 13cc
- Max pressure
- 290 psi (20 bar)
- Outlet
- 5/16-24
- Indus part no.IH-BD-25181-1
- Description
- 25181-1 — L13-R 1L PDI M10X1
- System
- PDI
- Lubricant
- Oil 32-750 cSt
- Reservoir
- 1L
- Output
- 13cc
- Max pressure
- 290 psi (20 bar)
- Outlet
- M10X1
- Indus part no.IH-BD-25181-3
- Description
- 25181-3 — L13-R 1L PDI M8X1
- System
- PDI
- Lubricant
- Oil 32-750 cSt
- Reservoir
- 1L
- Output
- 13cc
- Max pressure
- 290 psi (20 bar)
- Outlet
- M8X1
- Indus part no.IH-BD-25181-5
- Description
- 25181-5 — L13-R 1L PDI 5/16-24
- System
- PDI
- Lubricant
- Oil 32-750 cSt
- Reservoir
- 1L
- Output
- 13cc
- Max pressure
- 290 psi (20 bar)
- Outlet
- 5/16-24
- Indus part no.IH-BD-25211-3
- Description
- 25211-3 — L13-D 1L PDI M8X1
- System
- PDI
- Lubricant
- Oil 32-750 cSt
- Reservoir
- 1L
- Output
- 13cc
- Max pressure
- 290 psi (20 bar)
- Outlet
- M8X1
- Indus part no.IH-BD-25211-5
- Description
- 25211-5 — L13-D 1L PDI 5/16-24
- System
- PDI
- Lubricant
- Oil 32-750 cSt
- Reservoir
- 1L
- Output
- 13cc
- Max pressure
- 290 psi (20 bar)
- Outlet
- 5/16-24
- Indus part no.IH-BD-25187-3
- Description
- 25187-3 — LUB L3H-A MANUAL
- System
- —
- Lubricant
- —
- Reservoir
- —
- Output
- —
- Max pressure
- —
- Outlet
- —
Show all 12 sizesShow fewer sizes
- Indus part no.IH-BD-L3P
- Description
- L3P — L3P 0.2L SLP
- System
- SLR
- Lubricant
- Oil 30-1500 cSt
- Reservoir
- 0.2L
- Output
- 3cc
- Max pressure
- 29 psi (2 bar)
- Outlet
- M8X1
- Indus part no.IH-BD-L6P
- Description
- L6P — L6P 0.6L PDI 2OUT
- System
- PDI
- Lubricant
- Oil 30-3000 cSt
- Reservoir
- 0.6L
- Output
- 6cc
- Max pressure
- 290 psi (20 bar)
- Outlet
- M10X1
- Indus part no.IH-BD-L100P
- Description
- L100P — L100P 1L PROG
- System
- Progressive
- Lubricant
- Grease NLGI 1-3
- Reservoir
- 1L
- Output
- 1cc
- Max pressure
- 2031 psi (140 bar)
- Outlet
- 1/8BSPP
- Indus part no.IH-BD-20655C
- Description
- 20655C — LUBRI-TRAK CAROUSEL 1P
- System
- SLR
- Lubricant
- Oil 150-8000 SSU
- Reservoir
- 1 pint
- Output
- 0.2-0.5cc/cycle
- Max pressure
- 34 psi (2 bar)
- Outlet
- 1/8 TUBE
Description — What this part number is, as the manufacturer lists it. System — Lubrication system the pump feeds — SLR (single-line resistance), PDI (positive-displacement injector), progressive, Dualine or multi-line — as published. Lubricant — Oil or grease, with the viscosity or NLGI range the pump handles, as published. Reservoir — Reservoir capacity in the unit the maker publishes it. Output — Lubricant output per cycle or per minute, as published. Max pressure — Maximum pressure as the maker publishes it, in psi and bar. Outlet — Outlet port thread, as published.
What are Bijur Delimon manual PDI and progressive lubricators used for?▾
How do I read items such as 25062-1 — L13-L 1L PDI M10X1?▾
Which models and outputs are listed?▾
What are the maximum pressures of these lubricators?▾
Which oils and greases do the L13, L3P, L6P and L100P manual lubricators take?▾
Which injectors does the L13 fire?▾
What is a PDI system and how does the L13 use it?▾
L13 PDI lubricator compared with the L100P progressive pump?▾
Where are manual PDI and progressive lubricators used?▾
Where are the manuals for these lubricators?▾
How do I find spare parts for the L13 manual PDI lubricator?▾
Do you keep the Bijur Delimon manual PDI and progressive lubricators in stock, and how do I get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog





