Bijur Delimon DA Manual Lubricators (Dualine and Injector)

Bijur Delimon DA Manual Lubricators (Dualine and Injector): 9 part numbers, for Dualine / injector, Progressive systems; grease, oil; 2 KG, 2.4L, 4 KG, 6 KG, 6.2L reservoirs. DA lubricators are hand-lever, double-acting high-pressure piston pumps for grease or oil, for bearings that need lubricant only now and then. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.
Key features
- Product type: Manual lubricator
- Series: Bijur Delimon DA Manual Lubricators
- Drive: Manual
- Lubrication system: Dualine / injector, Progressive
- Lubricant: Grease, Oil
- Reservoir: 2 KG, 2.4L, 4 KG, 6 KG, 6.2L
- Output: 7.4 cc per stroke
- Product type
- Manual lubricator
- Drive
- Manual
- Lubrication system
- Dualine / injector, Progressive
- Lubricant
- Grease, Oil
Product description
DA lubricators are hand-lever, double-acting high-pressure piston pumps for grease or oil, for bearings that need lubricant only now and then.
Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.
How it works
A hand lever reciprocates the piston through a rack and gear segment. A quick-fill connection fills the reservoir through an inlet screen; oil versions use a float and level rod instead of the grease follower. Three reservoir sizes; versions for Dualine/injector and for single-line/progressive systems.
Range
9 listed part numbers — systems Dualine / injector, Progressive; lubricants Grease, Oil; reservoirs 2 KG, 2.4L, 4 KG, 6 KG, 6.2L; discharge 7.4 cc per stroke. The size table gives each part number's data.
Row descriptions are Bijur Delimon's own: LS / LLS level or low-level switch, HLS high-level switch, PG pressure gauge, PS pressure switch, CNTL controller, P&M pump and motor, SLR single-line resistance, PDI positive-displacement injector, PROG progressive. The columns give each part number's published data.
Where it is used
- infrequently lubricated bearings
- machines without power for a lubricator
Choosing the lubricator
A manual lubricator suits a machine with a few points or one that needs lubricant only now and then. Choose it on the distribution system (SLR, PDI, progressive or Dualine), the shot per stroke and the reservoir; fill pumps are chosen on the container they fit and the lubricant they move.
Complete systems
A pump is one part of a lubrication system. With it we supply the Bijur Delimon distribution — meter units, injectors, divider valves or Dualine valves — and the tubing, fittings, controllers and monitoring to match, sized to the number of points and the lubricant. Send us the machine and the lubrication points and we propose the full system.
Spare parts
Genuine Bijur Delimon service parts and kits for this range are listed by part number on Bijur Delimon DA Manual Lubricator Service Parts.
Documents
Bijur Delimon's datasheets for this range are in the Downloads tab.
Identification
| Parameter | Value |
|---|---|
| Product type | Manual lubricator |
| Series | Bijur Delimon DA Manual Lubricators |
| Drive | Manual |
Application
| Parameter | Value |
|---|---|
| Lubrication system | Dualine / injector, Progressive |
| Lubricant | Grease, Oil |
| Viscosity / NLGI range | NLGI 000-2, ISO VG 32 OR HIGHER |
Performance
| Parameter | Value |
|---|---|
| Reservoir | 2 KG, 2.4L, 4 KG, 6 KG, 6.2L |
| Output | 7.4 cc per stroke |
Electrical
| Parameter | Value |
|---|---|
| Monitoring | pressure gauge |
Connections
| Parameter | Value |
|---|---|
| Outlet thread | 1/4NPT |
| Fill connection | QD PLUG ISO 6150B, FILL CAP |
Ordering
| Parameter | Value |
|---|---|
| Supply | Genuine Bijur Delimon, direct from the manufacturer (authorised distributor) |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-BD-DA4101AC
- Description
- DA4101AC — DA 2KG DUALINE/INJ
- System
- Dualine / injector
- Lubricant
- Grease NLGI 000-2
- Reservoir
- 2 KG
- Output
- 7.4 cc per stroke
- Outlet
- 1/4NPT
- Monitoring
- pressure gauge
- Indus part no.IH-BD-DA4101BC
- Description
- DA4101BC — DA 2.4L DUALINE/INJ
- System
- Dualine / injector
- Lubricant
- Oil ISO VG 32 OR HIGHER
- Reservoir
- 2.4L
- Output
- 7.4 cc per stroke
- Outlet
- 1/4NPT
- Monitoring
- pressure gauge
- Indus part no.IH-BD-DA4102BC
- Description
- DA4102BC — DA 2.4L PROG HEAVY LOADS
- System
- Progressive
- Lubricant
- Oil ISO VG 32 OR HIGHER
- Reservoir
- 2.4L
- Output
- 7.4 cc per stroke
- Outlet
- 1/4NPT
- Monitoring
- pressure gauge
- Indus part no.IH-BD-DA4120AC
- Description
- DA4120AC — DA 2KG PROG
- System
- Progressive
- Lubricant
- Grease NLGI 000-2
- Reservoir
- 2 KG
- Output
- 7.4 cc per stroke
- Outlet
- 1/4NPT
- Monitoring
- pressure gauge
- Indus part no.IH-BD-DA4120BC
- Description
- DA4120BC — DA 2.4L PROG
- System
- Progressive
- Lubricant
- Oil ISO VG 32 OR HIGHER
- Reservoir
- 2.4L
- Output
- 7.4 cc per stroke
- Outlet
- 1/4NPT
- Monitoring
- pressure gauge
- Indus part no.IH-BD-DA5101AC
- Description
- DA5101AC — DA 4KG DUALINE/INJ
- System
- Dualine / injector
- Lubricant
- Grease NLGI 000-2
- Reservoir
- 4 KG
- Output
- 7.4 cc per stroke
- Outlet
- 1/4NPT
- Monitoring
- pressure gauge
- Indus part no.IH-BD-DA5120AC
- Description
- DA5120AC — DA 4KG PROG
- System
- Progressive
- Lubricant
- Grease NLGI 000-2
- Reservoir
- 4 KG
- Output
- 7.4 cc per stroke
- Outlet
- 1/4NPT
- Monitoring
- pressure gauge
- Indus part no.IH-BD-DA6101AC
- Description
- DA6101AC — DA 6KG DUALINE/INJ
- System
- Dualine / injector
- Lubricant
- Grease NLGI 000-2
- Reservoir
- 6 KG
- Output
- 7.4 cc per stroke
- Outlet
- 1/4NPT
- Monitoring
- pressure gauge
Show all 9 sizesShow fewer sizes
- Indus part no.IH-BD-DA6102BC
- Description
- DA6102BC — DA 6.2L PROG HEAVY LOADS
- System
- Progressive
- Lubricant
- Oil ISO VG 32 OR HIGHER
- Reservoir
- 6.2L
- Output
- 7.4 cc per stroke
- Outlet
- 1/4NPT
- Monitoring
- pressure gauge
Description — What this part number is, as the manufacturer lists it. System — Lubrication system the pump feeds — SLR (single-line resistance), PDI (positive-displacement injector), progressive, Dualine or multi-line — as published. Lubricant — Oil or grease, with the viscosity or NLGI range the pump handles, as published. Reservoir — Reservoir capacity in the unit the maker publishes it. Output — Lubricant output per cycle or per minute, as published. Outlet — Outlet port thread, as published. Monitoring — Level switch, pressure switch, gauge or controller the part number includes, as published.
What are Bijur Delimon DA manual lubricators used for?▾
How do I read a DA part number such as DA4101AC — DA 2KG DUALINE/INJ?▾
Which reservoir sizes and systems do DA manual lubricators come in?▾
What is the discharge per stroke of a DA manual lubricator?▾
Which lubricants can DA manual lubricators handle?▾
How do I fill a DA manual lubricator?▾
How does the hand lever of a DA lubricator work?▾
DA manual lubricator compared with the L13 PDI manual lubricator?▾
What is a Dualine system, and is the DA a fit?▾
Where are DA manual lubricators used?▾
Where is the DA datasheet?▾
Do you keep the Bijur Delimon DA manual lubricator in stock, and how do I get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog





