Mandrel Tubing Hanger, API 6A 10K, Standard Service

API 6A 10K Mandrel Tubing Hanger — supports the production tubing string within the tubing head. FMC / Cameron / Stream-Flo interchange.
Key features
- Wellhead Component Type: Mandrel Tubing Hanger
- Nominal Size: 2-9/16 in × 10K (single-string)
- Working Pressure: 10000 psi
- API 6A Pressure Class: 10K
- Service Class: Standard
- Wellhead Component Type
- Mandrel Tubing Hanger
- Nominal Size
- 2-9/16 in × 10K (single-string)
- Working Pressure
- 10000 psi
- API 6A Pressure Class
- 10K
- Service Class
- Standard
Product description
The Mandrel Tubing Hanger, API 6A 10K, Standard Service is an mandrel tubing hanger for upstream oil and gas wellhead service, 10K class (10,000 psi working pressure), standard rated. Standard service rated for clean hydrocarbon and water-cut wellbores.
Construction
- Component: Mandrel Tubing Hanger
- Nominal size: 2-9/16 in × 10K (single-string)
- Vertical through-bore: 2-9/16 in
- Top connection: Tubing-hanger top — mates with tubing head adapter
- Bottom connection: Tubing thread (e.g. 2-7/8 in EUE 8RD or NU)
- Body material: Forged alloy steel (AISI 4140) with packoff seal pockets
- Material class: AA (API 6A)
- Temperature class: P (API 6A)
Performance
Working pressure 10,000 psi (10K class). Manufactured to API 6A, PSL 3 (Product Specification Level), PR1 (Performance Requirement). Hydrostatic shell test to API 6A on every unit.
Applications
- Production tubing string support
- Wireline-set or stab-in tubing landing
- Workover tubing replacement
OEM equivalents and compatibility
This component is supplied as a recognised dimensional and metallurgical interchange for the following OEM wellhead product lines (no implied authorised-distributor relationship — supplied by Indus Hydraulics):
- FMC Mandrel Hanger
- Cameron Type C MTH
- Stream-Flo MTH
Compliance
- API 6A design and manufacture
- API 6A material class: AA
- API 6A temperature class: P
- PSL 3 / PR1
- EN 10204 3.1 / 3.2 mill test reports
- Ring-groove dimension certificates and hardness reports
How to order
Confirm on your RFQ: (a) wellhead bowl size and tubing / casing bore, (b) working pressure and pressure class, (c) top and bottom connection geometry (studded vs flanged, ring-groove series), (d) service class — sour (NACE MR0175) or standard, (e) temperature class, (f) PSL and PR requirements, (g) any custom porting (kill / circulation / instrumentation outlets), and (h) certification requirements. Indus quotes ex-Dubai with full API 6A traceability and OEM-source documentation on request.
Companion products
Pair with matched-class wellhead gate valves (manual or hydraulic), API 6BX flanges, ring-joint gaskets, BSL bolting, casing / tubing hangers, and tree caps in the same pressure class. For frac applications, stack into a frac tree with master valves, swab valves, wing valves, and pressure-release manifolds.
Identification
| Parameter | Value |
|---|---|
| Wellhead Component Type | Mandrel Tubing Hanger |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size | 2-9/16 in × 10K (single-string) |
| Top Connection | Tubing-hanger top — mates with tubing head adapter |
| Bottom Connection | Tubing thread (e.g. 2-7/8 in EUE 8RD or NU) |
| Vertical Through-Bore | 2-9/16 in |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 10000 psi |
| API 6A Pressure Class | 10K |
| Service Class | Standard |
| Temperature Class (API 6A) | P |
Compliance
| Parameter | Value |
|---|---|
| Material Class (API 6A) | AA |
| Product Specification Level (PSL) | PSL 3 |
| Performance Requirement (PR) | PR1 |
| API Specification | API 6A |
Construction
| Parameter | Value |
|---|---|
| Body Material | Forged alloy steel (AISI 4140) with packoff seal pockets |
Shipping & lead time
What is the Mandrel Tubing Hanger, API 6A 10K used for?▾
What do PSL 3, PR1 and material class AA mean on the Mandrel Tubing Hanger, API 6A 10K nameplate?▾
Which OEM wellhead lines is the Mandrel Tubing Hanger, API 6A 10K a dimensional interchange for?▾
What are the top and bottom connections of the Mandrel Tubing Hanger, API 6A 10K?▾
What is the working pressure of the Mandrel Tubing Hanger, API 6A 10K and how is it tested?▾
Is the Mandrel Tubing Hanger, API 6A 10K suitable for sour (H2S) service?▾
What standards and documents come with the Mandrel Tubing Hanger, API 6A 10K?▾
What does the Mandrel Tubing Hanger, API 6A 10K mate with in a wellhead stack?▾
Where is the Mandrel Tubing Hanger, API 6A 10K installed?▾
How does the Mandrel Tubing Hanger, API 6A 10K differ from the Wellhead Studded Adapter, API 6BX 15K?▾
Where is the Mandrel Tubing Hanger, API 6A 10K made, and what is the lead time?▾
Do you keep the Mandrel Tubing Hanger, API 6A 10K, Standard Service in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








