Koomey 5-Year Soft Goods Kit (SPM Seals + Diaphragms + Bladders + Pilot Hose Set), API 16D

The Koomey 5-Year Soft Goods Kit (SPM Seals + Diaphragms + Bladders + Pilot Hose Set), API 16D is a recurring-purchase koomey soft goods kit sized for N/A bore BOP equipment. The Koomey 5-Year Soft Goods Kit is the BOP control unit equivalent of the BOP nipple-up kit — converts "every soft good I need at 5-year API 16D recertification" into a single SKU. Sized for the 11-station Koomey Type 80; configurable on RFQ for Type 100 or other station counts. Standard service rated for sweet hydrocarbon, completion fluid, water, brine, and gas streams within the working-pressure envelope.

Construction

• Spare-part type: Koomey Soft Goods Kit
• Fits OEM: Koomey Type 80 / Type 100 BOP control units (Cameron lineage); also fits Pacseal Type 80 and NOV Pressure Control Type 80
• Service class: Standard
• Elastomer compound: HNBR
• Material: HNBR / Buna-N seal kit assortment for SPM valves (1" and 3/4" sizes), regulator diaphragms, accumulator bladders, pilot air-hydraulic pump rebuild kits, and pilot control hose set per API 16D
• Temperature rating: -20°F to 250°F (-29°C to 121°C) — sour-service NACE MR0175 envelope

Kit contents

SPM 1" valve seal kits (×6) + SPM 3/4" valve seal kits (×4) + annular regulator diaphragm (×1) + manifold regulator diaphragm (×1) + accumulator bladder kit (×3 for 11-station 80 gal unit) + air-hydraulic pump rebuild kit (×1) + electric pump rebuild kit (×1) + pilot control hose set (×11) — full 5-year soft-goods refresh for an 11-station Koomey Type 80

OEM compatibility

Engineered as a recognised aftermarket-acceptable replacement for the following OEM equipment lines (Indus Hydraulics is not an authorised distributor of these OEMs — parts are manufactured to the OEM dimensional standard with full mill test reports and API monogram traceability):

• Koomey 5-year soft goods kit
• Koomey Type 80 SPM kit
• Pacseal soft goods
• API 16D recert kit

Applications

• 5-year API 16D Koomey recertification
• Mid-life Koomey overhaul
• Pre-mobilisation refresh on rig BOP control units
• Workover / mobile pressure-control unit refresh

Performance & testing

Each unit is dimensionally inspected against the OEM datum, dye-penetrant or magnetic-particle inspected for surface defects, and shipped with mill test reports per EN 10204 3.1 / 3.2. Elastomer parts are batch-tested for hardness, compression set, and fluid resistance (sour service variants tested per NACE TM0297 / TM0187 where applicable). Charpy V-notch impact testing on metallic parts available where service requires low-temperature toughness verification.

Compliance

• API 16A (per part class)
• EN 10204 3.1 / 3.2 mill test reports
• Dimensional inspection report per part
• Heat-number / batch traceability

Sealed & dated packaging (GCC climate)

50 °C ambient + UV degrades unsealed elastomers in storage. Indus ships every elastomer / packing element / soft-goods kit in heat-sealed UV-resistant bags with manufacture date, batch number, and recommended-use-by date stamped on the outer label. Re-sealable bins for partial use. This is what Aramco / ADNOC / KOC supplier audits ask about — make sure you specify "sealed dated packaging" on the RFQ.

How to order

Confirm on your RFQ: (a) exact OEM part number or BOP serial number being serviced (we cross-reference to the matched aftermarket part), (b) bore size and working pressure, (c) drill-pipe or casing OD if a ram packer or VBR, (d) elastomer compound preference (HNBR / AFLAS for sour service GCC default), (e) bolting grade (B7M / L7M for sour), (f) certification requirements (NACE, charpy, mill 3.2 vs 3.1, IKTVA / ICV documentation), (g) destination port and packaging requirements. Indus quotes ex-Dubai (AED) — sales@indushydraulics.me or WhatsApp +971.