Guillemin adapter-Reducing Type

Guillemin adapter-Reducing Type — Guillemin reducer joining two Guillemin sizes. Sizes 3/4"–4". Not stated by Sunpool for the reducer; its other Guillemin parts are aluminium or stainless steel. Supplied by Sunpool (Taiwan); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: Guillemin Coupling
- Coupling Type / Variant: Guillemin Type — Guillemin adapter-Reducing Type
- End A Configuration: Larger Guillemin head
- End B Configuration: Smaller Guillemin head
- Size Range: 3/4"-4"
- Coupling Family
- Guillemin Coupling
- Coupling Type / Variant
- Guillemin Type — Guillemin adapter-Reducing Type
- End A Configuration
- Larger Guillemin head
- End B Configuration
- Smaller Guillemin head
- Size Range
- 3/4"-4"
Product description
The Guillemin adapter-Reducing Type is a Guillemin Coupling from the Sunpool (Taiwan) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.
Configuration
- Coupling family: Guillemin Coupling
- Coupling type: Guillemin Type — Guillemin adapter-Reducing Type
- End A: Larger Guillemin head
- End B: Smaller Guillemin head
Specifications
- Size range: 3/4"–4"
- Material: Not stated by Sunpool for the reducer; its other Guillemin parts are aluminium or stainless steel
- Working pressure: Not published by Sunpool. Give us your working pressure and medium and we will check it with the manufacturer.
About the family
Guillemin couplings are symmetrical quarter-turn couplings: every head is identical, so any two heads of the same size connect, with no male or female half. The Guillemin system is standardised in France as NF E 29-572 and is widely used there on fire, water and industrial transfer hose. Sunpool makes Guillemin parts from 3/4" to 4" in aluminium and stainless steel: hose-shank couplings, spiral hose tails, male- and female-thread adapters, reducing adapters and dust caps, many with a lock ring that stops the joint turning apart.
Selection and service notes
Guillemin is not interchangeable with Storz, cam and groove or Barcelona couplings, so confirm the pattern before ordering. Check the gasket at each make-up and clamp the hose tail for the pressure the hose will see. Sunpool does not state which standard its parts are made to or publish a working pressure for them.
How to order
Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.
Further reading: Guillemin couplings explained.
Sunpool sizes
Sunpool lists 14 reducing combinations, all in the size table.
Sizes from Sunpool’s catalogue page for this part, checked 7 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Guillemin Coupling |
| Coupling Type / Variant | Guillemin Type — Guillemin adapter-Reducing Type |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Larger Guillemin head |
| End B Configuration | Smaller Guillemin head |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 3/4"-4" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Not stated by Sunpool for the reducer; its other Guillemin parts are aluminium or stainless steel |
Shipping & lead time
Sizes & part numbers
14 sizes- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-125-100
- Nominal size
- 1-1/4" × 1"
- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-150-100
- Nominal size
- 1-1/2" × 1"
- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-150-125
- Nominal size
- 1-1/2" × 1-1/4"
- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-200-100
- Nominal size
- 2" × 1"
- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-200-150
- Nominal size
- 2" × 1-1/2"
- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-250-150
- Nominal size
- 2-1/2" × 1-1/2"
- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-250-200
- Nominal size
- 2-1/2" × 2"
- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-300-150
- Nominal size
- 3" × 1-1/2"
Show all 14 sizesShow fewer sizes
- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-300-200
- Nominal size
- 3" × 2"
- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-300-250
- Nominal size
- 3" × 2-1/2"
- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-400-150
- Nominal size
- 4" × 1-1/2"
- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-400-200
- Nominal size
- 4" × 2"
- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-400-250
- Nominal size
- 4" × 2-1/2"
- Indus part no.IH-GUI-GUILLEMIN-ADAPTER-REDUCING-TYPE-400-300
- Nominal size
- 4" × 3"
What is the Guillemin reducing adapter used for?▾
What sizes and part numbers are listed for the Guillemin reducing adapter?▾
How do I choose the right size or model of the Guillemin reducing adapter?▾
What working pressure applies to the Guillemin reducing adapter?▾
What is the Guillemin reducing adapter made from?▾
Which standards and documents apply to the Guillemin reducing adapter?▾
What does the Guillemin reducing adapter connect to?▾
How do I fit and look after the Guillemin reducing adapter?▾
Where is the Guillemin reducing adapter used?▾
How does the Guillemin reducing adapter differ from the Guillemin male thread adapter?▾
Where are the Guillemin reducing adapter shipped from, and what origin and HS code apply?▾
Is the Guillemin reducing adapter available from stock in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Guillemin-Kupplung Reduzierung
- fr
- raccord Guillemin réducteur
- es
- acoplamiento Guillemin reductor
- it
- raccordo Guillemin riduzione
From the blog








