Destaco 721D Series Hydraulic Screw-In Cylinders, Double Acting

Destaco 721D Series Hydraulic Screw-In Cylinders, Double Acting: 4 part numbers.
Product description
Destaco 721D Series Hydraulic Screw-In Cylinders, Double Acting: 4 part numbers.
Specification
- Type: Cylinder
- Pressure stated by the maker: 5,075 psi (350 bar)
- Part numbers: 4
Sizes and part numbers
The Sizes & Part Numbers tab lists every Destaco part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Sizing an air cylinder
Size an air cylinder on bore for force at the available supply pressure and on stroke for the travel needed, then match the mounting and rod end to the machine. Quote the maker part number, or bore, stroke, mounting and port, and we will confirm the match before supply.
How to order
Quote the Destaco part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Product Application | Clamping |
| Spindle Included | No |
Shipping & lead time
Sizes & part numbers
4 sizes- Destaco part no.721D25501-1
- Description
- Screw-In Cylinder Double Acting — Max. Clamping Force 3777 lbf.
- Stroke (in)
- 1.97
- Rated pressure (psi)
- 5,075
- Destaco part no.721D32501-2
- Description
- Screw-In Cylinder Double Acting — Max. Clamping Force 7000 lbf.
- Stroke (in)
- 1.97
- Rated pressure (psi)
- 5,075
- Destaco part no.721D40501-2
- Description
- Screw-In Cylinder Double Acting — Max. Clamping Force 9694 lbf.
- Stroke (in)
- 1.97
- Rated pressure (psi)
- 5,075
- Destaco part no.721D50501-2
- Description
- Screw-In Cylinder Double Acting — Max. Clamping Force 15146 lbf.
- Stroke (in)
- 1.97
- Rated pressure (psi)
- 5,075
Description — What this part number is, as the manufacturer lists it. Stroke — Cylinder stroke, as published. Rated pressure — Rated working pressure, as the manufacturer publishes it. A circuit is limited by its lowest-rated component.
Pressure, flow, speed, torque and load figures are the manufacturer’s published ratings for that part number. A circuit is limited by its lowest-rated component, so check them against the hose, fittings and valves it connects to.
What is the Destaco 721D series double-acting screw-in hydraulic cylinder used for?▾
How do I read Destaco part numbers such as 721D25501-1 and 721D50501-2?▾
What clamping forces does the Destaco 721D series offer?▾
What stroke does the Destaco 721D screw-in cylinder have?▾
What is the maximum pressure of the Destaco 721D series hydraulic cylinder?▾
Does the Destaco 721D series include a spindle?▾
What does a screw-in cylinder like the Destaco 721D connect to?▾
How should the Destaco 721D series screw-in cylinder be installed?▾
Which Destaco 721D part number should I choose for clamping?▾
Is there a datasheet for the Destaco 721D series screw-in cylinders?▾
How does a Destaco screw-in hydraulic cylinder differ from a tie-rod cylinder?▾
Is the Destaco 721D Series Hydraulic Screw-In Cylinders, Double Acting in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Cylinders, pumps & motors
Telescopic hydraulic cylinders: how stages work, single vs double-acting, and sizing a dump hoist
A telescopic cylinder gets a long stroke out of a short body by nesting stages inside each other. Why the biggest stage always moves first, why force falls and speed rises as each stage extends, when a hoist needs to be double-acting, and how to size one for a tipping body without overloading the last stage.
9 min read
Cylinders, pumps & motors
Dump pumps, PTO pumps and clutch pumps: truck hydraulics from the gearbox to the hoist
A tipper, crane truck or roll-off runs its hydraulics from the engine through a power take-off. How PTO ratio sets pump speed, how a dump pump with its built-in valve differs from a PTO gear pump, two-line and three-line systems, mounting, rotation and support, clutch pumps, and the duty rules that stop a PTO chewing its own splines.
7 min read
Cylinders, pumps & motors
Two-stage hydraulic pumps: how Hi-Lo log splitter pumps work, kick-down pressure and engine size
A two-stage pump gives a small engine a fast ram and a strong one: two gear sections together at low pressure, the small one alone at high pressure. How the unloading valve works, flows and horsepower for every common size from 5 to 28 gpm, kick-down settings, matching the engine and cylinder, and the faults that make a splitter slow or weak.
7 min read








