Cast Steel Swing Check Valve, BS 1868

Cast steel swing check valves to BS 1868 (to NPS 24) and ASME B16.34: NPS 2" to 60", Class 150 to 2500, bolted cover, swing disc on a hinge pin, raised-face, ring-joint or butt-weld ends.
Key features
- Valve type: Swing check valve
- Construction: Bolted cover, swing disc on hinge pin
- Design standard: BS 1868 (DN 15–600), ASME B16.34
- Size range: NPS 2" to 60" (DN50 to DN1500)
- Pressure class: ASME Class 150 to 2500
- Body material: Carbon steel, low-temperature steel, alloy steel, stainless steel
- End connections: RF, RTJ flanged; butt-weld
- Operation: Self-acting; damper or lever and weight on request
- Valve type
- Swing check valve
- Design standard
- BS 1868 (DN 15–600), ASME B16.34
- Pressure class
- ASME Class 150 to 2500
- End connections
- RF, RTJ flanged; butt-weld
- Operation
- Self-acting; damper or lever and weight on request
Product description
The standard non-return valve for horizontal process lines. The disc hangs from a hinge pin inside the body, swings clear of the flow when the line runs, and falls back onto the seat when flow stops, helped by the reverse pressure.
A check valve opens on forward flow and closes on its own when flow stops or reverses, protecting pumps, compressors and equipment downstream. No operator or power is needed; the closing speed and the flow needed to hold it open depend on the disc design.
Construction
- Swing disc on a hinge pin, bolted cover for access to the internals
- Seal-welded, hardfaced seat ring
- Damper or external lever and weight on request, to control closing
- Horizontal installation, or vertical with flow upward
Sizes and ratings
Published range: NPS 2" to 60" (DN50 to DN1500), ASME Class 150 to 2500, in carbon steel, low-temperature steel, alloy steel, stainless steel. End connections: RF, RTJ flanged; butt-weld. Operation: self-acting; damper or lever and weight on request.
The size table below lists 157 standard size and class combinations with face-to-face or end-to-end length, height and weight, so the valve can be checked against the piping layout before you enquire.
Testing and documents
Shell and seat tests to API 598, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Cast steel swing check valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other check valves in the range, for comparison when the duty is not settled yet: Tilting Disc Check Valve, Axial Flow Check Valve, API 6D, Dual Plate Check Valve, API 594, Forged Steel Lift and Swing Check Valve, API 602.
Identification
| Parameter | Value |
|---|---|
| Valve type | Swing check valve |
| Construction | Bolted cover, swing disc on hinge pin |
Standards
| Parameter | Value |
|---|---|
| Design standard | BS 1868 (DN 15–600), ASME B16.34 |
| Face-to-face / end-to-end | ASME B16.10 |
| Pressure testing | Shell and seat tests to API 598 |
Range
| Parameter | Value |
|---|---|
| Size range | NPS 2" to 60" (DN50 to DN1500) |
| Pressure class | ASME Class 150 to 2500 |
Materials
| Parameter | Value |
|---|---|
| Body material | Carbon steel, low-temperature steel, alloy steel, stainless steel |
| Seat and trim | Hardfaced, seal-welded seat |
Construction
| Parameter | Value |
|---|---|
| End connections | RF, RTJ flanged; butt-weld |
| Operation | Self-acting; damper or lever and weight on request |
Application
| Parameter | Value |
|---|---|
| Typical service | Pump discharge, process and utility lines |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the pressure-test record |
Shipping & lead time
Sizes & part numbers
157 sizes- Indus part no.IH-PV-SCC-150-0200
- Size
- 2"
- DN
- 50
- Class
- Class 150
- L (RF) (mm)
- 203
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 203
- H (mm)
- 147
- Weight (flanged) (kg)
- 15
- Weight (BW) (kg)
- 10
- Indus part no.IH-PV-SCC-150-0250
- Size
- 2-1/2"
- DN
- 65
- Class
- Class 150
- L (RF) (mm)
- 216
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 216
- H (mm)
- 166
- Weight (flanged) (kg)
- 20
- Weight (BW) (kg)
- 15.5
- Indus part no.IH-PV-SCC-150-0300
- Size
- 3"
- DN
- 80
- Class
- Class 150
- L (RF) (mm)
- 241
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 241
- H (mm)
- 174
- Weight (flanged) (kg)
- 25
- Weight (BW) (kg)
- 21.2
- Indus part no.IH-PV-SCC-150-0350
- Size
- 3-1/2"
- DN
- 90
- Class
- Class 150
- L (RF) (mm)
- 267
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 267
- H (mm)
- 193
- Weight (flanged) (kg)
- 31
- Weight (BW) (kg)
- 25
- Indus part no.IH-PV-SCC-150-0400
- Size
- 4"
- DN
- 100
- Class
- Class 150
- L (RF) (mm)
- 292
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 292
- H (mm)
- 198
- Weight (flanged) (kg)
- 41
- Weight (BW) (kg)
- 32
- Indus part no.IH-PV-SCC-150-0500
- Size
- 5"
- DN
- 125
- Class
- Class 150
- L (RF) (mm)
- 330
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 330
- H (mm)
- 228
- Weight (flanged) (kg)
- 58
- Weight (BW) (kg)
- 45
- Indus part no.IH-PV-SCC-150-0600
- Size
- 6"
- DN
- 150
- Class
- Class 150
- L (RF) (mm)
- 356
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 356
- H (mm)
- 297
- Weight (flanged) (kg)
- 75
- Weight (BW) (kg)
- 64
- Indus part no.IH-PV-SCC-150-0800
- Size
- 8"
- DN
- 200
- Class
- Class 150
- L (RF) (mm)
- 495
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 495
- H (mm)
- 353
- Weight (flanged) (kg)
- 125
- Weight (BW) (kg)
- 103
Show all 157 sizesShow fewer sizes
Size — Nominal pipe size (NPS), as published. DN — Nominal diameter (DN), as published. Class — Pressure class or working pressure the row is built to (ASME Class, PN or psi), as published. L (RF) — Face-to-face length with raised-face flanged ends, as published. L (RTJ) — Face-to-face length with ring-type-joint flanged ends, as published. L (BW) — End-to-end length with butt-weld ends, as published. H — Dimension H on the manufacturer dimension drawing. Weight (flanged) — Weight with flanged ends, as published. Weight (BW) — Weight with butt-weld ends, as published. Ask us for the dimension drawing if you need it stamped.
Lengths are in millimetres and weights in kilograms, as published for each size and class. The end connection, trim, seat and operator you order can change the length and weight, so we confirm the general arrangement drawing with the quotation.
What is the BS 1868 cast steel swing check valve used for?▾
How do I read the BS 1868 cast steel swing check valve part numbers such as IH-PV-SCC-600-1800?▾
What sizes and classes is the BS 1868 cast steel swing check valve available in?▾
What pressure and temperature can the BS 1868 cast steel swing check valve take?▾
What materials is the BS 1868 cast steel swing check valve made in?▾
What tests and documents come with the BS 1868 cast steel swing check valve?▾
How is the BS 1868 cast steel swing check valve operated, and what end connections does it have?▾
BS 1868 cast steel swing check valve: Can it be installed vertically?▾
BS 1868 cast steel swing check valve: Why does my swing check chatter?▾
How does the BS 1868 cast steel swing check valve compare with the tilting disc check valve?▾
Where is the BS 1868 cast steel swing check valve supplied from?▾
Is the BS 1868 cast steel swing check valve in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog






