
Brass Hose Menders — brass hose mender with a barb at each end. Sizes 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4". Brass. Supplied by Sealfast (USA); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: Hose Mender
- Coupling Type / Variant: Mender — Hose Menders
- End A Configuration: Hose barb
- End B Configuration: Hose barb
- Size Range: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"
- Coupling Family
- Hose Mender
- Coupling Type / Variant
- Mender — Hose Menders
- End A Configuration
- Hose barb
- End B Configuration
- Hose barb
- Size Range
- 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"
Product description
The Brass Hose Menders is a Hose Mender from the Sealfast (USA) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.
Configuration
- Coupling family: Hose Mender
- Coupling type: Mender — Hose Menders
- End A: Hose barb
- End B: Hose barb
Specifications
- Size range: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"
- Material: Brass
- Working pressure: Not published by Sealfast. Give us your working pressure and medium and we will check it with the manufacturer.
About the family
A hose mender joins two lengths of the same hose, after a cut or a burst, with a barbed tail at each end, each held by a clamp. Sealfast's brass menders run from 1/8" to 3/4".
Selection and service notes
A mender restores flow, not the hose's original rating: the joint is limited by its clamps, and the hose either side is as old as the part that failed. Sealfast publishes no working pressure for menders.
How to order
Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.
Further reading: KC nipples, shank couplings and hose menders.
Sealfast part numbers
Order by the Sealfast part number for the material you need, or by the Indus part number in the size table.
| Size | Brass |
|---|---|
| 1/8" | HM-2 |
| 3/16" | HM-3 |
| 1/4" | HM-4 |
| 5/16" | HM-5 |
| 3/8" | HM-6 |
| 1/2" | HM-8 |
| 5/8" | HM-10 |
| 3/4" | HM-12 |
Part numbers from Seal Fast, Inc.’s catalogue at products.sealfast.com, checked 6 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Hose Mender |
| Coupling Type / Variant | Mender — Hose Menders |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Hose barb |
| End B Configuration | Hose barb |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Brass |
Shipping & lead time
Sizes & part numbers
8 sizes- Indus part no.IH-MND-HOSE-MENDERS-018
- Nominal size
- 1/8"
- Indus part no.IH-MND-HOSE-MENDERS-019
- Nominal size
- 3/16"
- Indus part no.IH-MND-HOSE-MENDERS-025
- Nominal size
- 1/4"
- Indus part no.IH-MND-HOSE-MENDERS-031
- Nominal size
- 5/16"
- Indus part no.IH-MND-HOSE-MENDERS-038
- Nominal size
- 3/8"
- Indus part no.IH-MND-HOSE-MENDERS-050
- Nominal size
- 1/2"
- Indus part no.IH-MND-HOSE-MENDERS-058
- Nominal size
- 5/8"
- Indus part no.IH-MND-HOSE-MENDERS-075
- Nominal size
- 3/4"
What are the brass hose menders used for?▾
Which sizes are the brass hose menders available in?▾
How should I select the brass hose menders for my application?▾
What working pressure applies to the brass hose menders?▾
Which materials are the brass hose menders offered in?▾
Which standards apply to the brass hose menders?▾
What do the brass hose menders connect to?▾
How do I fit and look after the brass hose menders?▾
Which industries and jobs use the brass hose menders?▾
How do the brass hose menders differ from the Dixon hose menders?▾
Where are the brass hose menders shipped from, and what origin and HS code apply?▾
Can I buy the brass hose menders from stock in the UAE?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog






