Bosch Rexroth PGH4 Size 20 Internal Gear Pump, 20.1 cm³/rev

Bosch Rexroth PGH4 size 20 internal gear pump: gap-compensated, fixed displacement, 20.1 cm³/rev, rated 315 bar with 350 bar peaks, up to 3000 rpm. Current type PGH4-3X/020RE11VU2, material no. R901147100.
Key features
- Displacement: 20.1 cm³/rev
- Pressure (peak): 350 bar
Product description
The Bosch Rexroth PGH4 size 20 is a gap-compensated internal gear pump with fixed displacement. A pinion shaft running in hydrodynamic plain bearings drives an internally toothed ring gear, and the oil carried in the tooth spaces moves from the suction side to the pressure port. System pressure presses axial washers and radial segments against the gears, so the clearances adjust themselves and volumetric efficiency stays high over the pump's life; the long tooth mesh keeps flow pulsation and noise low.
Rexroth builds it for durable high-power, high-pressure drives with very high load-cycle counts: plastics machines, automated presses, foundry machines and accumulator-charging circuits, including variable-speed drives. It is an internal gear pump, not an external one, as this page used to say.
Ratings
- Displacement: 20.1 cm³/rev
- Pressure: 315 bar maximum operating; 350 bar peak, for 10 ms at a time
- Speed: 400 to 3000 rpm
- Flow: 28.9 L/min at 1450 rpm and 10 bar
- Drive power: 1.1 to 35 kW
- Mass: 14 kg
The type code
PGH4-3X/020RE11VU2 reads: PG internal gear pump, H high-pressure, frame size 4, series 3X, size 020, R clockwise rotation, E keyed Ø25 mm shaft, 11 pressure port to ISO 6162-2, V FKM seals, U2 two-hole 101-2 flange to ISO 3019-1. Series 2X is no longer offered in frame size 4; Rexroth's current pump is the 3X, material no. R901147100.
- Mounting: U2, two-hole flange 101-2 to ISO 3019-1 (Ø101.6 mm pilot); or E4, four-hole flange to ISO 3019-2
- Shaft: E, Ø25 mm keyed; or R, 15T 16/32DP splined
- Ports: suction DN25 (SAE 1 in), pressure DN19 (SAE 3/4 in), SAE flange ports
- Seals: V, FKM; or W, NBR shaft seal with FKM seals
- Rotation: R or L, not reversible
Fluid and installation
HLP mineral oil to DIN 51524, from −10 to +80 °C, filtered to ISO 4406 class 20/18/15. Suction pressure 0.8 to 2 bar absolute. Mount it preferably horizontal with the suction port at the bottom. The pump has no built-in pressure limiting, so the circuit needs a relief valve. A through drive lets it carry other PGH, vane or axial piston pumps.
Ordering
Quote PGH4-3X/020RE11VU2, or your pump's nameplate code if it differs in shaft, flange, ports or rotation. We supply new pumps and confirm lead time on the quotation.
Hydraulic
| Parameter | Value |
|---|---|
| Displacement | 20.1 cm³/rev |
| Pressure (peak) | 350 bar |
| Speed (max) | 3000 rpm |
| Pump type | Internal gear, gap-compensated, fixed displacement |
| Max operating pressure | 315 bar |
| Flow at 1450 rpm, 10 bar | 28.9 L/min |
Mechanical
| Parameter | Value |
|---|---|
| Mounting | Two-hole flange 101-2 to ISO 3019-1 (U2) |
| Rotation | Clockwise (R); counter-clockwise (L) to order |
| Weight | 14 kg |
Identification
| Parameter | Value |
|---|---|
| Rexroth material no. | R901147100 (PGH4-3X/020RE11VU2) |
Shipping & lead time
What is the Bosch Rexroth PGH4 size 20 internal gear pump used for?▾
What sizes and part numbers are listed for the Bosch Rexroth PGH4 size 20 internal gear pump?▾
How do I choose the right size or model of the Bosch Rexroth PGH4 size 20 internal gear pump?▾
What pressure rating does the Bosch Rexroth PGH4 size 20 internal gear pump have?▾
Which materials is the Bosch Rexroth PGH4 size 20 internal gear pump offered in?▾
Which standards and documents apply to the Bosch Rexroth PGH4 size 20 internal gear pump?▾
What does the Bosch Rexroth PGH4 size 20 internal gear pump connect to?▾
How should the Bosch Rexroth PGH4 size 20 internal gear pump be installed and maintained?▾
Where is the Bosch Rexroth PGH4 size 20 internal gear pump used?▾
How does the Bosch Rexroth PGH4 size 20 internal gear pump differ from the Vickers hydraulic gear pumps?▾
Where are the Bosch Rexroth PGH4 size 20 internal gear pump shipped from, and what origin and HS code apply?▾
Do you keep the Bosch Rexroth PGH4 size 20 internal gear pump in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Cylinders, pumps & motors
How to size a hydraulic pump: flow, pressure, drive power and the inlet nobody checks
A pump is sized by the flow the actuators need and the power the drive can give it, and it fails most often on the suction side. The formulas in litres and gallons, worked examples for electric motors, engines and PTOs, line sizing, and the checks that decide whether a pump lasts five years or five weeks.
13 min read
Cylinders, pumps & motors
Hydraulic pump types: gear, vane and piston pumps compared, and how to choose
External gear, internal gear, vane, axial piston and radial piston pumps all move oil by trapping it and pushing it out, and they differ in pressure, noise, efficiency, dirt tolerance and price. How each one works, real ratings from pumps on the shelf, fixed versus variable displacement, and a selection guide.
10 min read





