Bijur Delimon PM60 Oil and Grease Drum Pumps (6:1 to 80:1)

Bijur Delimon PM60 Oil and Grease Drum Pumps (6:1 to 80:1): 8 part numbers, oil, grease; ratios 6:1, 12:1, 80:1. PM60 pumps are the largest air-operated piston pumps in the PM range, for high-demand oil and grease supply through long lines. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.
Key features
- Product type: Air-operated barrel pump
- Series: Bijur Delimon PM60 Oil and Grease Drum Pumps
- Drive: Compressed air (air motor)
- Lubricant: Oil, Grease
- Output: 9.25GAL/min, 5.3GAL/min, 33LB/min, 5.5LB/min
- Max pressure: 1,020 psi (70 bar) to 8,000 psi (552 bar)
- Pressure ratio: 6:1, 12:1, 80:1
- Product type
- Air-operated barrel pump
- Drive
- Compressed air (air motor)
- Lubricant
- Oil, Grease
Product description
PM60 pumps are the largest air-operated piston pumps in the PM range, for high-demand oil and grease supply through long lines.
Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.
How it works
6:1 and 12:1 for oil (wall-bracket stub pumps), 80:1 for grease on 120 lb and 400 lb drums, and a 12:1 bulk-tote grease transfer pump (33 lb/min) with a 3-inch camlock.
Range
8 listed part numbers — lubricants Oil, Grease; containers BULK TOTE, 400LB, 120LB; pressure ratios 6:1, 12:1, 80:1; output 9.25GAL/min, 5.3GAL/min, 33LB/min, 5.5LB/min; maximum pressure 1,020 psi (70 bar) to 8,000 psi (552 bar). The size table gives each part number's data.
Where it is used
- central grease stations
- bulk oil supply from totes
Choosing the pump
Pick the pressure ratio for the lubricant and the line: oil in volume through short runs needs a low ratio, grease through long lines, reels and central systems a high one. Then match the container — pail, 120 lb or 400 lb drum, 55-gallon drum or bulk tote — and the execution (stub, drum or flange mount, with or without follower plate and cover). Check the air supply the plant can give the pump at the flow it needs.
Complete systems
A pump is one part of a lubrication system. With it we supply the Bijur Delimon distribution — meter units, injectors, divider valves or Dualine valves — and the tubing, fittings, controllers and monitoring to match, sized to the number of points and the lubricant. Send us the machine and the lubrication points and we propose the full system.
Spare parts
Genuine Bijur Delimon service parts and kits for this range are listed by part number on Bijur Delimon PM60 Drum Pump Service Kits and Bijur Delimon Barrel Pump Parts, Kits and Accessories.
Documents
Bijur Delimon's datasheets for this range are in the Downloads tab.
Identification
| Parameter | Value |
|---|---|
| Product type | Air-operated barrel pump |
| Series | Bijur Delimon PM60 Oil and Grease Drum Pumps |
| Drive | Compressed air (air motor) |
Application
| Parameter | Value |
|---|---|
| Lubricant | Oil, Grease |
Performance
| Parameter | Value |
|---|---|
| Output | 9.25GAL/min, 5.3GAL/min, 33LB/min, 5.5LB/min |
| Max pressure | 1,020 psi (70 bar) to 8,000 psi (552 bar) |
| Pressure ratio | 6:1, 12:1, 80:1 |
| Fits container | BULK TOTE, 400LB, 120LB |
Connections
| Parameter | Value |
|---|---|
| Outlet thread | 3/4NPT, 1/2NPT |
Ordering
| Parameter | Value |
|---|---|
| Supply | Genuine Bijur Delimon, direct from the manufacturer (authorised distributor) |
Shipping & lead time
Sizes & part numbers
8 sizes- Indus part no.IH-BD-F537631
- Description
- F537631 — PM60 6:1 9GPM STUB FLANGE MOUNT
- Lubricant
- Oil
- Pressure ratio
- 6:1
- Fits
- —
- Output
- 9.25GAL/min
- Max pressure
- 1020 psi (70 bar)
- Outlet
- 3/4NPT
- Indus part no.IH-BD-F537131
- Description
- F537131 — PM60 12:1 5GPM STUB FLANGE MOUNT
- Lubricant
- Oil
- Pressure ratio
- 12:1
- Fits
- —
- Output
- 5.3GAL/min
- Max pressure
- 2040 psi (141 bar)
- Outlet
- 3/4NPT
- Indus part no.IH-BD-F532131
- Description
- F532131 — PM60 HD 12:1 33PPM BULK TOTE
- Lubricant
- Grease
- Pressure ratio
- 12:1
- Fits
- BULK TOTE
- Output
- 33LB/min
- Max pressure
- 1200 psi (83 bar)
- Outlet
- 1/2NPT
- Indus part no.IH-BD-F532811
- Description
- F532811 — PM60 HD 80:1 5.5PPM 400LB FLANGE MOUNT
- Lubricant
- Grease
- Pressure ratio
- 80:1
- Fits
- 400LB
- Output
- 5.5LB/min
- Max pressure
- 8000 psi (552 bar)
- Outlet
- 1/2NPT
- Indus part no.IH-BD-F532821
- Description
- F532821 — PM60 HD 80:1 5.5PPM 120LB FLANGE MOUNT
- Lubricant
- Grease
- Pressure ratio
- 80:1
- Fits
- 120LB
- Output
- 5.5LB/min
- Max pressure
- 8000 psi (552 bar)
- Outlet
- 1/2NPT
- Indus part no.IH-BD-F534810
- Description
- F534810 — KIT PUMP 532821 COVER F418026 FP F417009 HOSE F534103
- Lubricant
- Grease
- Pressure ratio
- —
- Fits
- 400LB
- Output
- 5.5LB/min
- Max pressure
- 8000 psi (552 bar)
- Outlet
- 1/2NPT
- Indus part no.IH-BD-F534121
- Description
- F534121 — PM60 12:1 PUMP F532130 W/PNEUMATIC INDUCTOR
- Lubricant
- Grease
- Pressure ratio
- 12:1
- Fits
- 400LB
- Output
- 33LB/min
- Max pressure
- 1200 psi (83 bar)
- Outlet
- 1/2NPT
- Indus part no.IH-BD-F534821
- Description
- F534821 — PM60 80:1 PUMP F532821 W/PNEUMATIC INDUCTOR
- Lubricant
- Grease
- Pressure ratio
- 80:1
- Fits
- 400LB
- Output
- 5.5LB/min
- Max pressure
- 8000 psi (552 bar)
- Outlet
- 1/2NPT
Description — What this part number is, as the manufacturer lists it. Lubricant — Oil or grease, with the viscosity or NLGI range the pump handles, as published. Pressure ratio — Air-motor to fluid pressure ratio of an air-operated pump, as published. Fits — Container or drum the pump is built to fit, as published. Output — Lubricant output per cycle or per minute, as published. Max pressure — Maximum pressure as the maker publishes it, in psi and bar. Outlet — Outlet port thread, as published.
What are Bijur Delimon PM60 oil and grease drum pumps used for?▾
How do I read PM60 items such as F532811 — PM60 HD 80:1 5.5PPM 400LB FLANGE MOUNT?▾
Which PM60 ratios are available?▾
What are the PM60 outputs and maximum pressures?▾
Which lubricants can the PM60 handle?▾
What kits and inductor versions are listed for the PM60?▾
PM60 compared with the PM45?▾
Where do I find PM60 spare parts?▾
Where are PM60 pumps used?▾
Is there a datasheet for the PM60?▾
How do I choose the right PM60 ratio?▾
Do you keep the Bijur Delimon PM60 drum pump in stock, and how do I get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog







