Hoses & Fittings

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

60 SKUs4 brands

Hydraulic Hoses Thermoplastic Hoses Crimp Ferrules Hydraulic SAE Flanges Hydraulic Quick Couplers Ferrules Hydraulic Adapters Hydraulic Fittings Stainless Steel Hydraulic Fittings

Size range

5,917orderable sizes

405listings with a size table

3/16" to 2.1/2"bore range

Every size above is a part number you can quote from. Open any listing for its full table.

Delivery

Hoses & Fittings across the Gulf

Ex-stock from Dubai, delivered within 3 working days in the UAE.

Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.

Saudi ArabiaTypically 3 working days from dispatch OmanTypically 3 working days from dispatch QatarTypically 3 working days from dispatch BahrainTypically 3 working days from dispatch KuwaitTypically 3 working days from dispatch

Beyond the Gulf

East Africa: Kenya, Burundi, Ethiopia
West & Central Africa: Nigeria, Gabon, Republic of the Congo
Southern Africa: South Africa, Zimbabwe, Namibia

See every export destination

Body Configuration: 45-elbow Body Configuration: accessory Body Configuration: bulkhead Body Configuration: cross Body Configuration: lock-nut Body Configuration: run-tee Clear all

Showing 1–48 of 60 SKUs

Sort

Latest A–Z Z–A

IH-AD-JIC-002

Male Cross JIC

Indus Hydraulics-04 to -32 (1/4" to 2")up to 350 bar (5000 psi)

IH-AD-NPT-004

Run Tee Connector f NPT X f NPT X m NPT

Indus HydraulicsNPT taper 1/8" to 2"run-tee

IH-AD-BSP-010

Male Stud Run Tee

Indus Hydraulicsrun-teebonded-seal

IH-AD-ORFS-016

Adjustable 45° Elbow m ORFS X m SAE

Indus Hydraulics45-elboworfs

IH-AD-ORFS-001

Lock Nut ORFS

Indus Hydraulicslock-nut-04 to -16

IH-AD-DIN-007

Swivel Nut Run Tee (DIN 2353)

Indus HydraulicsDIN 24° cone L-series and S-series (M10×1 to M42×2)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)

IH-AD-MET-047

Metric Male 74° Cone Bulkhead

Indus HydraulicsMetric 37° cone (74° included)-10 to -45

IH-AD-SAEFL-003

45° Elbow Flange Connector m JIC X L-series flange

Indus Hydraulics37-cone1/2" to 2"

IH-AD-ORFS-027

ORFS Male O-Ring × ORFS Female Run Tee

Indus Hydraulicsrun teeup to 630 bar (9,137 psi), manufacturer stated

IH-AD-HSF-009

O-Rings for SAE Hydraulic Flanges

Indus Hydraulics1/2" to 5"SAE J518 flange-face O-ring (Code 61 / Code 62 sizes 1/2" to 5")

IH-AD-JIC-044

45° JIC Male 74° Cone × BSP Male O-Ring Adjustable Stud End

Indus Hydraulicsup to 315 bar (4,569 psi), manufacturer stated-04 to -24

IH-AD-MET-036

45° Elbow Metric Male 74° Cone × NPT Male

Indus Hydraulics-12 to -4545 elbow

IH-AD-DIN-051

Metric Bite Type 45° Elbow Reducer Tube Adaptor with Swivel Nut

Indus Hydraulics-12 to -52Metric M12×1.5 to M42×2

IH-AD-ORFS-031

ORFS Male O-Ring × BSP Male O-Ring Run Tee

Indus Hydraulics-04 to -16ORFS flat face with O-ring

IH-AD-BSP-041

Male Stud 45° Elbow NPT

Indus Hydraulicsbonded-seal45-elbow

IH-AD-ORFS-021

Adjustable 45° Elbow m ORFS X m BSP

Indus Hydraulicsup to 415 bar (6000 psi)45-elbow

IH-AD-BSP-051

Union 45° Elbow

Indus Hydraulicsbonded-sealBSPP G1/8 to G2 (parallel)

IH-AD-BSP-047

Male Stud 45° Elbow BSPP O-Ring

Indus Hydraulicsbonded-sealG1/8 to G2

IH-AD-BSP-002

Female Thread Cross

Indus HydraulicsG1/8 to G2up to 400 bar at smaller sizes; derates with size

IH-AD-DIN-013

Adjustable Run Tee m Metric X m Metric

Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)

IH-AD-BSP-006

Swivel Nut Run Tee (BSP)

Indus Hydraulicsrun-teeBSPP G1/8 to G2 (parallel)

IH-AD-BSP-031

Bulkhead Union

Indus HydraulicsG1/8 to G2bulkhead

IH-AD-JIC-025

45° Elbow m JIC X m BSPT

Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)up to 350 bar (5000 psi)

IH-AD-MET-048

Metric Male 74° Cone × Metric Male Adjustable Stud End Run Tee

Indus Hydraulicsup to 315 bar (4,569 psi), manufacturer stated-14 to -45

IH-AD-DIN-005

Union Cross

Indus HydraulicscrossL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)

IH-AD-JIC-023

Bulkhead Union JIC

Indus Hydraulics37-conebulkhead

IH-AD-DIN-004

24° Cone End Nut

Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)none

IH-AD-DIN-028

Bulkhead Union Metric

Indus HydraulicsbulkheadL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)

IH-AD-DIN-046

Metric Bite Type 45° Elbow UN/UNF Adjustable Stud End

Indus Hydraulics-12 to -52Metric M12×1.5 to M42×2

IH-AD-ORFS-006

Adjustable Run Tee m ORFS X m ORFS X m Metric

Indus Hydraulicsrun-tee-04 to -16

IH-AD-NPT-001

Female Cross NPT

Indus HydraulicscrossNPT 1/8" to 2"

IH-AD-JIC-009

Adjustable Run Tee m JIC X m JIC X m Metric

Indus Hydraulics-04 to -32 (1/4" to 2")run-tee

IH-AD-HSF-010

Set of Bolts and Spring Washers

Indus HydraulicsSAE J429 Grade 5 / Grade 8 bolt set with spring washers, matching SAE J518 4-bolt pattern1/2" to 5"

IH-AD-MET-021

Metric Male O-Ring × Metric Female Run Tee

Indus Hydraulicsrun teeMetric M14×1.5 to M52×2

IH-AD-DIN-002

Lock Nut for Bulkhead

Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)none

IH-AD-BSP-074

45° Elbow JIS Gas Male 60° Cone × BSPT Male 60° Seat

Indus Hydraulics45 elbowBSP (G) G1/8-28 to G2-11

IH-AD-BSP-035

Male Stud 45° Elbow BSPT

Indus HydraulicsBSPT R1/8 to R2 (taper)G1/8 to G2

IH-AD-BSP-039

Male Stud 45° Elbow UNF O-Ring

Indus HydraulicsUNF straight (SAE J1926 ORB)45-elbow

IH-AD-JIC-040

45° Elbow JIC Male 74° Cone Bulkhead

Indus Hydraulicsbulkheadup to 345 bar (5,004 psi), manufacturer stated

IH-AD-JIC-041

45° Elbow JIC Male 74° Cone × NPT Male

Indus Hydraulics45 elbowJIC 37° cone (74° included)

IH-AD-DIN-050

45° Elbow BSP Adjustable Stud End

Indus Hydraulics45 elbow-12 to -52

IH-AD-ORFS-013

Bulkhead Union ORFS

Indus HydraulicsbulkheadORFS UN/UNF (9/16-18 to 1-7/16-12)

IH-AD-JIC-031

Adjustable 45° Elbow m JIC X m Metric Flat

Indus Hydraulics45-elbow-04 to -32 (1/4" to 2")

IH-AD-JIC-039

45° JIC Male 74° Cone

Indus Hydraulicsup to 345 bar (5,004 psi), manufacturer stated45 elbow

IH-AD-ORFS-005

Adjustable Run Tee m ORFS X m ORFS X m SAE

Indus Hydraulics-04 to -16up to 415 bar (6000 psi)

IH-AD-MET-023

45° Metric Male O-Ring × Metric Male Adjustable Stud End

Indus Hydraulics-12 to -5245 elbow

IH-AD-DIN-049

Metric Bite Type 45° Elbow Male Adjustable Stud End

Indus Hydraulics-12 to -45Metric O-ring stud end

IH-AD-MET-002

Male Cross Metric

Indus HydraulicsMetric M10×1 to M42×2cross

1 2 ›

From the blog

Written about this range

Assembly, crimping & certification

Getting a hydraulic hose made: what to bring and what we measure

Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.

3 min read

Thread & fitting identification

BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not

They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.

3 min read

Failure analysis

Hose routing: bend radius, twist and the failures they cause

Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.

3 min read