Hoses & Fittings

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

36 SKUs4 brands

Hydraulic Hoses Thermoplastic Hoses Crimp Ferrules Hydraulic SAE Flanges Hydraulic Quick Couplers Ferrules Hydraulic Adapters Hydraulic Fittings Stainless Steel Hydraulic Fittings

Size range

5,917orderable sizes

405listings with a size table

3/16" to 2.1/2"bore range

Every size above is a part number you can quote from. Open any listing for its full table.

Delivery

Hoses & Fittings across the Gulf

Ex-stock from Dubai, delivered within 3 working days in the UAE.

Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.

Saudi ArabiaTypically 3 working days from dispatch OmanTypically 3 working days from dispatch QatarTypically 3 working days from dispatch BahrainTypically 3 working days from dispatch KuwaitTypically 3 working days from dispatch

Beyond the Gulf

East Africa: Kenya, Burundi, Ethiopia
West & Central Africa: Nigeria, Gabon, Republic of the Congo
Southern Africa: South Africa, Zimbabwe, Namibia

See every export destination

Body Configuration: accessory Body Configuration: bulkhead-elbow Body Configuration: cap Body Configuration: cutting-ring Body Configuration: lock-nut Body Configuration: plug Body Configuration: reducer Clear all

Showing 1–36 of 36 SKUs

Sort

Latest A–Z Z–A

IH-AD-ORFS-007

Plug ORFS

Indus Hydraulicsplug-04 to -16

IH-AD-NPT-015

Plug NPT

Indus HydraulicsNPT 1/8" to 2"plug

IH-AD-ORFS-001

Lock Nut ORFS

Indus Hydraulicslock-nut-04 to -16

IH-AD-MET-050

JIS Metric Male 60° Cone Plug

Indus HydraulicsJIS 30° cone (60° included), metric threadMetric M14×1.5 to M33×1.5

IH-AD-BSP-019

Thread Reducer

Indus Hydraulicsup to 400 bar at smaller sizes; derates with sizeG1/8 to G2

IH-AD-HSF-009

O-Rings for SAE Hydraulic Flanges

Indus Hydraulics1/2" to 5"SAE J518 flange-face O-ring (Code 61 / Code 62 sizes 1/2" to 5")

IH-AD-MET-007

Plug Metric

Indus Hydraulics24-coneplug

IH-AD-MET-006

90° Bulkhead Metric Flat

Indus HydraulicsM10×1 to M42×2Metric M10×1 to M42×2

IH-AD-DIN-018

Blanking Plug

Indus HydraulicsL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)L6 to L42 (light series), S6 to S38 (heavy series)

IH-AD-MET-043

Metric Male 74° Cone Plug

Indus Hydraulicsup to 350 bar (5,076 psi), manufacturer stated-10 to -45

IH-AD-BSP-012

Hexagon Socket Plug

Indus Hydraulicsbonded-sealup to 400 bar at smaller sizes; derates with size

IH-AD-MET-003

Swivel Cap Metric

Indus HydraulicsM10×1 to M42×2up to 400 bar

IH-AD-JIC-045

Metric Thread Male Captive Seal × JIC Female 74° Seat

Indus Hydraulics-10 to -33Metric M10×1 to M33×1.5

IH-AD-JIC-014

Plug JIC

Indus Hydraulicsup to 350 bar (5000 psi)-04 to -32 (1/4" to 2")

IH-AD-DIN-004

24° Cone End Nut

Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)none

IH-AD-DIN-016

Blanking Plug for Port with ED Seal

Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)

IH-AD-BSP-011

Female Swivel Cap

Indus Hydraulicsup to 400 bar at smaller sizes; derates with sizecap

IH-AD-NPT-013

Cap NPT

Indus Hydraulicsup to 350 bar (5000 psi)NPT taper 1/8" to 2"

IH-AD-DIN-003

Cutting Ring for 24° Cone End Nut

Indus HydraulicsnoneCutting ring for DIN 2353 bite-type fitting (sizes L6 to L42, S6 to S38)

IH-AD-MET-008

Hollow Hex Plug Metric Flat

Indus HydraulicsM10×1 to M42×2flat-face

IH-AD-ORFS-030

ORFS Male O-Ring × Metric Thread Male Captive Seal

Indus HydraulicsUN/UNF 9/16-18 to 1.11/16-12ORFS flat face with O-ring

IH-AD-HSF-010

Set of Bolts and Spring Washers

Indus HydraulicsSAE J429 Grade 5 / Grade 8 bolt set with spring washers, matching SAE J518 4-bolt pattern1/2" to 5"

IH-AD-JIC-042

JIC Male 74° Cone × BSP Male Captive Seal

Indus HydraulicsUN/UNF 7/16-20 to 1.7/8-12-04 to -24

IH-AD-DIN-002

Lock Nut for Bulkhead

Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)none

IH-AD-ORFS-008

Swivel Cap ORFS

Indus Hydraulics-04 to -16orfs

IH-AD-BSP-016

BSP Plug (Plug)

Indus Hydraulicsplugup to 400 bar at smaller sizes; derates with size

IH-AD-MET-010

Plug Metric Seal Flat

Indus HydraulicsMetric M10×1 to M42×2 (flat-face)flat-face

IH-AD-DIN-026

Bulkhead Elbow Union Metric

Indus Hydraulicsbulkhead-elbow24-cone

IH-AD-JIC-001

Lock Nut JIC

Indus Hydraulicsnonelock-nut

IH-AD-DIN-024

Swivel Nut Union Tube End Reducer

Indus HydraulicsreducerDIN 24° cone L-series and S-series (M10×1 to M42×2)

IH-AD-BSP-001

Bulkhead Locknut

Indus Hydraulicsnonelock-nut

IH-AD-DIN-017

Blanking Plug with Nut for Cone

Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)DIN 24° cone L-series and S-series (M10×1 to M42×2)

IH-AD-BSP-014

Hex Head Plug

Indus HydraulicsBSPP G1/8 to G2 (parallel)plug

IH-AD-BSP-013

Blanking Plug for Ports with ED Seal

Indus HydraulicsplugBSPP G1/8 to G2 with ED seal

IH-AD-BSP-071

BSPT Male 60° Seat Plug

Indus HydraulicsBSPT (R) R1/8'-28 to R2-1160° cone seat

IH-AD-JIC-015

Swivel Cap JIC

Indus Hydraulicscap-04 to -32 (1/4" to 2")

From the blog

Written about this range

Assembly, crimping & certification

Getting a hydraulic hose made: what to bring and what we measure

Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.

3 min read

Thread & fitting identification

BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not

They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.

3 min read

Failure analysis

Hose routing: bend radius, twist and the failures they cause

Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.

3 min read