Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
Hoses & Fittings across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- West & Central Africa
- Nigeria, Gabon, Republic of the Congo
- Southern Africa
- South Africa, Zimbabwe, Namibia
ORFS Female Swivel 90° Long Drop Crimp Fitting for Spiral Hose
JIC Male 37° Cone Long Hose Fitting
Pressure Washer / Waterjet Female Hose Fitting
BSP Female Swivel 60° Cone 90° Elbow Crimp Fitting for Braided Hose
JIC 37° Male Rigid Crimp Fitting for Braided Hose
JIC 37° Female Swivel Crimp Fitting for Braided Hose
BSP swivel female 60° cone with o-ring
90° JIC Female 37° Seat Compact Hose Fitting
Double hexagonal NPSM swivel female cone 60º
BSP swivel female 60° cone with o-ring (90º elbow)
JIC Female Thrust Wire Nut Hose Fitting
From the blog
Written about this range
Assembly, crimping & certification
Getting a hydraulic hose made: what to bring and what we measure
Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.
3 min read
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Failure analysis
Hose routing: bend radius, twist and the failures they cause
Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.
3 min read