Skip to content
+971 52 2477942

Questions we get asked

About this range

01Are load binders lifting equipment?
No. A load binder tensions a chain tie-down to secure a load for transport. Its WLL is a tensioning rating and it is not for lifting.
02Do the parts come with test certificates?
Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.

Category

Load Securing, Rope & Marine

Load binders, ratchet straps, fibre rope and twine, marine anchors, anchor chain, bollards, cleats and marine fenders.

113 SKUs0 brands

Size range

1,380orderable sizes
100listings with a size table

Every size above is a part number you can quote from. Open any listing for its full table.

Delivery

Load Securing, Rope & Marine across the Gulf

Ex-stock from Dubai, delivered within 3 working days in the UAE.

Rigging hardware is bought on its working load limit and its certificate, and both travel with the part: every shackle, hook, chain and sling ships from Dubai with the manufacturer's test certificate, so the receiving inspection checks a document against a stamp rather than a claim. Hardware and fittings go by air or courier in cartons; wire rope, chain, hoists and anchors are heavy enough that sea freight is usually the sensible answer.

Showing 97–113 of 113 SKUs

Grade 80 Winch Hook Half Link Safety Latch — dimension drawing
IH-LR-LB-G80WHHLSL

Grade 80 Winch Hook Half Link Safety Latch

Powder coatedAlloy steel
IH-LR-AC-ESDGU2U3
IH-LR-AC-ESDGU2U3

End Shackle, D Type — Grades U2 and U3

Steel CM490/CM69011 mm to 162 mm
Welded Inclined Bollard CBT 169-1999 — dimension drawing
IH-LR-BM-WIBCBT169

Welded Inclined Bollard CBT 169-1999

Steel plate
Marine Single Cross Bollard CBT3845-2013 — dimension drawing
IH-LR-BM-MSCBCBT38

Marine Single Cross Bollard CBT3845-2013

100 mm to 400 mm50 to 650 kN
Stud Link Anchor Chain — Grades U1, U2 and U3 — dimension drawing
IH-LR-AC-SLACGU1U2

Stud Link Anchor Chain — Grades U1, U2 and U3

Hot-dip galvanized, black bitumen coatingLow carbon alloy steel
Foam Fender PF Type — dimension drawing
IH-LR-MF-FFPF

Foam Fender PF Type

Twin Horn Bollard — dimension drawing
IH-LR-BM-THB

Twin Horn Bollard

Cast steel10 t to 200 t
Stainless Steel Bow Roller — dimension drawing, rS type
IH-LR-BM-SSBR

Stainless Steel Bow Roller

Stainless steel
Stainless Steel Boat Cleat — dimension drawing, two-hole, low flat 2A
IH-LR-BM-SSBC

Stainless Steel Boat Cleat

M4 to M8Stainless steel AISI316
Bruce / Claw Anchor — dimension drawing, galvanized
IH-LR-AN-BCA

Bruce / Claw Anchor

2 kg to 20 kgGalvanized
Folding Grapnel Anchor — dimension drawing, galvanized
IH-LR-AN-FGA

Folding Grapnel Anchor

Galvanized steelGalvanized
Grade 80 Ratchet Load Binder — EN 12195-3 — dimension drawing, safety hooks
IH-LR-LB-80RLBE121

Grade 80 Ratchet Load Binder — EN 12195-3

Alloy steel40 to 160 kN
Grade 100 Ratchet Load Binder — dimension drawing, safety hooks
IH-LR-LB-100RLB

Grade 100 Ratchet Load Binder

Powder coatedAlloy steel
Ratchet Strap — 4″ (100 mm) — dimension drawing
IH-LR-RS-RS4100M

Ratchet Strap — 4″ (100 mm)

Polyester5,400 lbs
Ratchet Strap — 3″ (75 mm) — dimension drawing
IH-LR-RS-RS375M

Ratchet Strap — 3″ (75 mm)

Polyester
IH-LR-RS-RS250M
IH-LR-RS-RS250M

Ratchet Strap — 2″ (50 mm)

3,333 lbs2″
IH-LR-RS-RS125M
IH-LR-RS-RS125M

Ratchet Strap — 1″ (25 mm)

Polyester1″