Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
67 SKUs4 brands
Body Configuration: 45-elbowBody Configuration: accessoryBody Configuration: branch-teeBody Configuration: bulkheadBody Configuration: lock-nutBody Configuration: teeClear all
IH-AD-DIN-010
Adjustable Branch Tee m Metric X m SAE X m Metric
Indus HydraulicsL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)branch-tee
IH-AD-NPT-002
Branch Tee Connector f NPT X m NPT X f NPT
Indus Hydraulicsup to 350 bar (5000 psi)NPT taper 1/8" to 2"
IH-AD-DIN-011
Adjustable BranchTee (Variant 2)
Indus Hydraulics24-coneL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-HSF-009
O-Rings for SAE Hydraulic Flanges
Indus Hydraulics1/2" to 5"SAE J518 flange-face O-ring (Code 61 / Code 62 sizes 1/2" to 5")
IH-AD-JIC-044
45° JIC Male 74° Cone × BSP Male O-Ring Adjustable Stud End
Indus Hydraulicsup to 315 bar (4,569 psi), manufacturer stated-04 to -24
IH-AD-DIN-051
Metric Bite Type 45° Elbow Reducer Tube Adaptor with Swivel Nut
Indus Hydraulics-12 to -52Metric M12×1.5 to M42×2
IH-AD-JIC-049
JIC Male 74° Cone Bulkhead Branch Tee
Indus Hydraulics-04 to -24JIC 37° cone (74° included)
IH-AD-DIN-014
Union Tee (DIN 2353)
Indus Hydraulics24-coneL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-MET-020
Metric Male O-Ring × Metric Female Branch Tee
Indus HydraulicsMetric M14×1.5 to M52×2-14 to -52
IH-AD-JIC-025
45° Elbow m JIC X m BSPT
Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)up to 350 bar (5000 psi)
IH-AD-BSP-004
Female Thread Tee
Indus Hydraulicsup to 400 bar at smaller sizes; derates with sizebranch-tee
IH-AD-DIN-009
Adjustable BranchTee
Indus HydraulicsL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)DIN 24° cone L-series and S-series (M10×1 to M42×2)
IH-AD-DIN-028
Bulkhead Union Metric
Indus HydraulicsbulkheadL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-046
Metric Bite Type 45° Elbow UN/UNF Adjustable Stud End
Indus Hydraulics-12 to -52Metric M12×1.5 to M42×2
IH-AD-ORFS-002
Adjustable Branch Tee m ORFS X m SAE X m ORFS
Indus HydraulicsORFS UN/UNF (9/16-18 to 1-7/16-12)branch-tee
IH-AD-JIC-007
Adjustable Branch Tee m JIC X m NPT X m JIC
Indus Hydraulicsbranch-teeup to 350 bar (5000 psi)
IH-AD-ORFS-003
Adjustable Branch Tee m ORFS X m BSP X m ORFS
Indus HydraulicsORFS UN/UNF (9/16-18 to 1-7/16-12)branch-tee
IH-AD-MET-046
Metric Male 74° Cone × Metric Male Adjustable Stud End Branch Tee
Indus HydraulicsMetric 37° cone (74° included)Metric M14×1.5 to M45×2
IH-AD-HSF-010
Set of Bolts and Spring Washers
Indus HydraulicsSAE J429 Grade 5 / Grade 8 bolt set with spring washers, matching SAE J518 4-bolt pattern1/2" to 5"
IH-AD-DIN-008
Swivel Nut Branch Tee (DIN 2353)
Indus Hydraulics24-coneL6 to L42 (light series), S6 to S38 (heavy series)
IH-AD-DIN-002
Lock Nut for Bulkhead
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)none
IH-AD-BSP-074
45° Elbow JIS Gas Male 60° Cone × BSPT Male 60° Seat
Indus Hydraulics45 elbowBSP (G) G1/8-28 to G2-11
IH-AD-JIC-040
45° Elbow JIC Male 74° Cone Bulkhead
Indus Hydraulicsbulkheadup to 345 bar (5,004 psi), manufacturer stated
IH-AD-JIC-041
45° Elbow JIC Male 74° Cone × NPT Male
Indus Hydraulics45 elbowJIC 37° cone (74° included)
From the blog
Written about this range
Assembly, crimping & certification
Getting a hydraulic hose made: what to bring and what we measure
Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.
3 min read
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Failure analysis
Hose routing: bend radius, twist and the failures they cause
Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.
3 min read