Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
83 SKUs4 brands
Body Configuration: 45-elbowBody Configuration: accessoryBody Configuration: branch-teeBody Configuration: capBody Configuration: double-flangeBody Configuration: lock-nutBody Configuration: plugClear all
IH-AD-DIN-010
Adjustable Branch Tee m Metric X m SAE X m Metric
Indus HydraulicsL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)branch-tee
IH-AD-HSF-002
BSP Threaded Double Flange
Indus Hydraulics1/2" to 5"Code 61 up to 210 bar (3000 psi); Code 62 up to 415 bar (6000 psi)
IH-AD-MET-050
JIS Metric Male 60° Cone Plug
Indus HydraulicsJIS 30° cone (60° included), metric threadMetric M14×1.5 to M33×1.5
IH-AD-NPT-002
Branch Tee Connector f NPT X m NPT X f NPT
Indus Hydraulicsup to 350 bar (5000 psi)NPT taper 1/8" to 2"
IH-AD-DIN-011
Adjustable BranchTee (Variant 2)
Indus Hydraulics24-coneL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-HSF-009
O-Rings for SAE Hydraulic Flanges
Indus Hydraulics1/2" to 5"SAE J518 flange-face O-ring (Code 61 / Code 62 sizes 1/2" to 5")
IH-AD-JIC-044
45° JIC Male 74° Cone × BSP Male O-Ring Adjustable Stud End
Indus Hydraulicsup to 315 bar (4,569 psi), manufacturer stated-04 to -24
IH-AD-DIN-051
Metric Bite Type 45° Elbow Reducer Tube Adaptor with Swivel Nut
Indus Hydraulics-12 to -52Metric M12×1.5 to M42×2
IH-AD-JIC-049
JIC Male 74° Cone Bulkhead Branch Tee
Indus Hydraulics-04 to -24JIC 37° cone (74° included)
IH-AD-DIN-014
Union Tee (DIN 2353)
Indus Hydraulics24-coneL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-018
Blanking Plug
Indus HydraulicsL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)L6 to L42 (light series), S6 to S38 (heavy series)
IH-AD-MET-020
Metric Male O-Ring × Metric Female Branch Tee
Indus HydraulicsMetric M14×1.5 to M52×2-14 to -52
IH-AD-JIC-025
45° Elbow m JIC X m BSPT
Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)up to 350 bar (5000 psi)
IH-AD-MET-043
Metric Male 74° Cone Plug
Indus Hydraulicsup to 350 bar (5,076 psi), manufacturer stated-10 to -45
IH-AD-BSP-004
Female Thread Tee
Indus Hydraulicsup to 400 bar at smaller sizes; derates with sizebranch-tee
IH-AD-BSP-012
Hexagon Socket Plug
Indus Hydraulicsbonded-sealup to 400 bar at smaller sizes; derates with size
IH-AD-HSF-006
Socket Weld Double Flange
Indus HydraulicsSocket weld for tube/pipe end (1/2" to 5")weld
IH-AD-DIN-009
Adjustable BranchTee
Indus HydraulicsL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)DIN 24° cone L-series and S-series (M10×1 to M42×2)
IH-AD-JIC-045
Metric Thread Male Captive Seal × JIC Female 74° Seat
Indus Hydraulics-10 to -33Metric M10×1 to M33×1.5
IH-AD-DIN-046
Metric Bite Type 45° Elbow UN/UNF Adjustable Stud End
Indus Hydraulics-12 to -52Metric M12×1.5 to M42×2
IH-AD-DIN-016
Blanking Plug for Port with ED Seal
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-ORFS-002
Adjustable Branch Tee m ORFS X m SAE X m ORFS
Indus HydraulicsORFS UN/UNF (9/16-18 to 1-7/16-12)branch-tee
IH-AD-JIC-007
Adjustable Branch Tee m JIC X m NPT X m JIC
Indus Hydraulicsbranch-teeup to 350 bar (5000 psi)
IH-AD-ORFS-030
ORFS Male O-Ring × Metric Thread Male Captive Seal
Indus HydraulicsUN/UNF 9/16-18 to 1.11/16-12ORFS flat face with O-ring
IH-AD-ORFS-003
Adjustable Branch Tee m ORFS X m BSP X m ORFS
Indus HydraulicsORFS UN/UNF (9/16-18 to 1-7/16-12)branch-tee
IH-AD-MET-046
Metric Male 74° Cone × Metric Male Adjustable Stud End Branch Tee
Indus HydraulicsMetric 37° cone (74° included)Metric M14×1.5 to M45×2
From the blog
Written about this range
Assembly, crimping & certification
Getting a hydraulic hose made: what to bring and what we measure
Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.
3 min read
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Failure analysis
Hose routing: bend radius, twist and the failures they cause
Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.
3 min read