Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
59 SKUs4 brands
Body Configuration: 45-elbowBody Configuration: accessoryBody Configuration: bulkheadBody Configuration: bulkhead-elbowBody Configuration: double-flangeBody Configuration: lock-nutBody Configuration: run-teeClear all
IH-AD-DIN-007
Swivel Nut Run Tee (DIN 2353)
Indus HydraulicsDIN 24° cone L-series and S-series (M10×1 to M42×2)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-HSF-002
BSP Threaded Double Flange
Indus Hydraulics1/2" to 5"Code 61 up to 210 bar (3000 psi); Code 62 up to 415 bar (6000 psi)
IH-AD-ORFS-027
ORFS Male O-Ring × ORFS Female Run Tee
Indus Hydraulicsrun teeup to 630 bar (9,137 psi), manufacturer stated
IH-AD-HSF-009
O-Rings for SAE Hydraulic Flanges
Indus Hydraulics1/2" to 5"SAE J518 flange-face O-ring (Code 61 / Code 62 sizes 1/2" to 5")
IH-AD-JIC-044
45° JIC Male 74° Cone × BSP Male O-Ring Adjustable Stud End
Indus Hydraulicsup to 315 bar (4,569 psi), manufacturer stated-04 to -24
IH-AD-DIN-051
Metric Bite Type 45° Elbow Reducer Tube Adaptor with Swivel Nut
Indus Hydraulics-12 to -52Metric M12×1.5 to M42×2
IH-AD-ORFS-031
ORFS Male O-Ring × BSP Male O-Ring Run Tee
Indus Hydraulics-04 to -16ORFS flat face with O-ring
IH-AD-DIN-013
Adjustable Run Tee m Metric X m Metric
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-JIC-025
45° Elbow m JIC X m BSPT
Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)up to 350 bar (5000 psi)
IH-AD-MET-048
Metric Male 74° Cone × Metric Male Adjustable Stud End Run Tee
Indus Hydraulicsup to 315 bar (4,569 psi), manufacturer stated-14 to -45
IH-AD-HSF-006
Socket Weld Double Flange
Indus HydraulicsSocket weld for tube/pipe end (1/2" to 5")weld
IH-AD-DIN-028
Bulkhead Union Metric
Indus HydraulicsbulkheadL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-046
Metric Bite Type 45° Elbow UN/UNF Adjustable Stud End
Indus Hydraulics-12 to -52Metric M12×1.5 to M42×2
IH-AD-JIC-009
Adjustable Run Tee m JIC X m JIC X m Metric
Indus Hydraulics-04 to -32 (1/4" to 2")run-tee
IH-AD-HSF-010
Set of Bolts and Spring Washers
Indus HydraulicsSAE J429 Grade 5 / Grade 8 bolt set with spring washers, matching SAE J518 4-bolt pattern1/2" to 5"
IH-AD-MET-021
Metric Male O-Ring × Metric Female Run Tee
Indus Hydraulicsrun teeMetric M14×1.5 to M52×2
IH-AD-DIN-002
Lock Nut for Bulkhead
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)none
IH-AD-BSP-074
45° Elbow JIS Gas Male 60° Cone × BSPT Male 60° Seat
Indus Hydraulics45 elbowBSP (G) G1/8-28 to G2-11
IH-AD-JIC-040
45° Elbow JIC Male 74° Cone Bulkhead
Indus Hydraulicsbulkheadup to 345 bar (5,004 psi), manufacturer stated
IH-AD-JIC-041
45° Elbow JIC Male 74° Cone × NPT Male
Indus Hydraulics45 elbowJIC 37° cone (74° included)
IH-AD-JIC-031
Adjustable 45° Elbow m JIC X m Metric Flat
Indus Hydraulics45-elbow-04 to -32 (1/4" to 2")
IH-AD-JIC-039
45° JIC Male 74° Cone
Indus Hydraulicsup to 345 bar (5,004 psi), manufacturer stated45 elbow
IH-AD-ORFS-005
Adjustable Run Tee m ORFS X m ORFS X m SAE
Indus Hydraulics-04 to -16up to 415 bar (6000 psi)
IH-AD-MET-023
45° Metric Male O-Ring × Metric Male Adjustable Stud End
Indus Hydraulics-12 to -5245 elbow
IH-AD-DIN-049
Metric Bite Type 45° Elbow Male Adjustable Stud End
Indus Hydraulics-12 to -45Metric O-ring stud end
IH-AD-DIN-012
Adjustable RunTee
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
From the blog
Written about this range
Assembly, crimping & certification
Getting a hydraulic hose made: what to bring and what we measure
Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.
3 min read
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Failure analysis
Hose routing: bend radius, twist and the failures they cause
Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.
3 min read