Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
Hoses & Fittings across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Male Stud Connector
Adjustable Run Tee m ORFS X m ORFS X m SAE
BSP Male 60° Seat or Bonded Seal × NPT Female
Metric Male 74° Cone Tee
Adjustable RunTee
JIC Male 74° Cone × SAE O-Ring Boss Run Tee
Male Connector m Metric X m Komatsu
Adjustable Run Tee m JIC X m JIC X m BSP
45° Female Swivel Connector JIC
Swivel Connector BSPP 60° Cone Seat
BSP Adjustable Stud End Run Tee
JIS Metric Male 60° Cone Tee
Swivel Connector Metric
Metric Male Bite Type × SAE Flange (S-Series, 6000 psi)
Metric Male 74° Cone × BSPT Male
90° Elbow ORFS Male O-Ring Bulkhead
Male Connector m JIC X m Metric Flat with Seal
From the blog
Written about this range
Assembly, crimping & certification
Getting a hydraulic hose made: what to bring and what we measure
Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.
3 min read
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Failure analysis
Hose routing: bend radius, twist and the failures they cause
Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.
3 min read