Hoses & Fittings

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

25 SKUs4 brands

Hydraulic Hoses Thermoplastic Hoses Crimp Ferrules Hydraulic SAE Flanges Hydraulic Quick Couplers Ferrules Hydraulic Adapters Hydraulic Fittings Stainless Steel Hydraulic Fittings

Size range

5,917orderable sizes

405listings with a size table

3/16" to 2.1/2"bore range

Every size above is a part number you can quote from. Open any listing for its full table.

Delivery

Hoses & Fittings across the Gulf

Ex-stock from Dubai, delivered within 3 working days in the UAE.

Saudi ArabiaTypically 3 working days from dispatch OmanTypically 3 working days from dispatch QatarTypically 3 working days from dispatch BahrainTypically 3 working days from dispatch KuwaitTypically 3 working days from dispatch

Body Configuration: cutting-ring Body Configuration: double-flange Body Configuration: lock-nut Body Configuration: run-tee Clear all

Showing 1–25 of 25 SKUs

Sort

Latest A–Z Z–A

IH-AD-NPT-004

Run Tee Connector f NPT X f NPT X m NPT

Indus HydraulicsNPT taper 1/8" to 2"run-tee

IH-AD-BSP-010

Male Stud Run Tee

Indus Hydraulicsrun-teebonded-seal

IH-AD-ORFS-001

Lock Nut ORFS

Indus Hydraulicslock-nut-04 to -16

IH-AD-DIN-007

Swivel Nut Run Tee (DIN 2353)

Indus HydraulicsDIN 24° cone L-series and S-series (M10×1 to M42×2)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)

IH-AD-HSF-002

BSP Threaded Double Flange

Indus Hydraulics1/2" to 5"Code 61 up to 210 bar (3000 psi); Code 62 up to 415 bar (6000 psi)

IH-AD-ORFS-027

ORFS Male O-Ring × ORFS Female Run Tee

Indus Hydraulicsrun teeup to 630 bar (9,137 psi), manufacturer stated

IH-AD-ORFS-031

ORFS Male O-Ring × BSP Male O-Ring Run Tee

Indus Hydraulics-04 to -16ORFS flat face with O-ring

IH-AD-DIN-013

Adjustable Run Tee m Metric X m Metric

Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)

IH-AD-BSP-006

Swivel Nut Run Tee (BSP)

Indus Hydraulicsrun-teeBSPP G1/8 to G2 (parallel)

IH-AD-MET-048

Metric Male 74° Cone × Metric Male Adjustable Stud End Run Tee

Indus Hydraulicsup to 315 bar (4,569 psi), manufacturer stated-14 to -45

IH-AD-HSF-006

Socket Weld Double Flange

Indus HydraulicsSocket weld for tube/pipe end (1/2" to 5")weld

IH-AD-ORFS-006

Adjustable Run Tee m ORFS X m ORFS X m Metric

Indus Hydraulicsrun-tee-04 to -16

IH-AD-JIC-009

Adjustable Run Tee m JIC X m JIC X m Metric

Indus Hydraulics-04 to -32 (1/4" to 2")run-tee

IH-AD-DIN-003

Cutting Ring for 24° Cone End Nut

Indus HydraulicsnoneCutting ring for DIN 2353 bite-type fitting (sizes L6 to L42, S6 to S38)

IH-AD-MET-021

Metric Male O-Ring × Metric Female Run Tee

Indus Hydraulicsrun teeMetric M14×1.5 to M52×2

IH-AD-DIN-002

Lock Nut for Bulkhead

Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)none

IH-AD-ORFS-005

Adjustable Run Tee m ORFS X m ORFS X m SAE

Indus Hydraulics-04 to -16up to 415 bar (6000 psi)

IH-AD-DIN-012

Adjustable RunTee

Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)

IH-AD-JIC-051

JIC Male 74° Cone × SAE O-Ring Boss Run Tee

Indus Hydraulics-04 to -24UN/UNF 7/16-20 to 1.7/8-12

IH-AD-JIC-010

Adjustable Run Tee m JIC X m JIC X m BSP

Indus Hydraulicsup to 350 bar (5000 psi)-04 to -32 (1/4" to 2")

IH-AD-JIC-001

Lock Nut JIC

Indus Hydraulicsnonelock-nut

IH-AD-DIN-047

BSP Adjustable Stud End Run Tee

Indus HydraulicsMetric M12×1.5 to M42×2Metric O-ring stud end

IH-AD-JIC-003

Run Tee Swivel JIC

Indus Hydraulics-04 to -32 (1/4" to 2")run-tee

IH-AD-BSP-001

Bulkhead Locknut

Indus Hydraulicsnonelock-nut

IH-AD-HSF-003

NPT Threaded Double Flange

Indus Hydraulicsnpt-taperdouble-flange

From the blog

Written about this range

Assembly, crimping & certification

Getting a hydraulic hose made: what to bring and what we measure

Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.

3 min read

Thread & fitting identification

BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not

They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.

3 min read

Failure analysis

Hose routing: bend radius, twist and the failures they cause

Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.

3 min read