Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
45° JIC Male 74° Cone × BSP Male O-Ring Adjustable Stud End
45° Elbow JIC Male 74° Cone × NPT Male
45° JIC Male 74° Cone
45° Elbow JIS Gas Male 60° Cone × BSPT Male 60° Seat
45° Elbow BSP Male 60° Seat × Metric Male
Metric Bite Type 45° Elbow Reducer Tube Adaptor with Swivel Nut
Metric Bite Type 45° Elbow Male Adjustable Stud End
Metric Bite Type 45° Elbow UN/UNF Adjustable Stud End
45° Metric Male O-Ring × Metric Male Adjustable Stud End
Adjustable 45° Elbow m JIC X m Metric Flat
Set of Bolts and Spring Washers
Lock Nut for Bulkhead
O-Rings for SAE Hydraulic Flanges
BSP Threaded Double Flange
45° Elbow m JIC X m BSPT
Socket Weld Double Flange
From the blog
Written about this range
Assembly, crimping & certification
Hose service in Sharjah, Ajman, Ras Al Khaimah and Fujairah: four different problems
Workshop density in Sharjah, quarry abrasion at Khor Khwair, port and bunkering equipment in Fujairah. Same hose, four failure patterns, four different service answers.
4 min read
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Assembly, crimping & certification
Getting a hydraulic hose made: what to bring and what we measure
Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.
3 min read