Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
176 SKUs4 brands
Body Configuration: 45-elbowBody Configuration: accessoryBody Configuration: bulkheadBody Configuration: capBody Configuration: lock-nutBody Configuration: plugBody Configuration: run-teeBody Configuration: straightClear all
IH-AD-DIN-013
Adjustable Run Tee m Metric X m Metric
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-034
Male Stud Connector Metric
Indus HydraulicsDIN 24° cone L-series and S-series (M10×1 to M42×2)L6 to L42 (light series), S6 to S38 (heavy series)
IH-AD-DIN-019
Swivel Union
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-018
Blanking Plug
Indus HydraulicsL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)L6 to L42 (light series), S6 to S38 (heavy series)
IH-AD-NPT-011
Male Female Connector m NPT X f NPT
Indus Hydraulicsup to 350 bar (5000 psi)NPT 1/8" to 2"
IH-AD-MET-033
Metric Male 74° Cone × SAE O-Ring Boss
Indus HydraulicsMetric 37° cone (74° included)Metric M16×1.5 to M45×2
IH-AD-JIC-025
45° Elbow m JIC X m BSPT
Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)up to 350 bar (5000 psi)
IH-AD-MET-043
Metric Male 74° Cone Plug
Indus Hydraulicsup to 350 bar (5,076 psi), manufacturer stated-10 to -45
IH-AD-DIN-029
Weld Connector
Indus HydraulicsstraightL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-BSP-012
Hexagon Socket Plug
Indus Hydraulicsbonded-sealup to 400 bar at smaller sizes; derates with size
IH-AD-JIC-043
JIC Male 74° Cone × BSP Male O-Ring
Indus Hydraulics-04 to -24JIC 37° cone (74° included)
IH-AD-JIC-019
Swivel Connector f JIC x f JIC
Indus HydraulicsstraightJIC 37° UN/UNF (7/16-20 to 1-7/8-12)
IH-AD-MET-048
Metric Male 74° Cone × Metric Male Adjustable Stud End Run Tee
Indus Hydraulicsup to 315 bar (4,569 psi), manufacturer stated-14 to -45
IH-AD-JIC-045
Metric Thread Male Captive Seal × JIC Female 74° Seat
Indus Hydraulics-10 to -33Metric M10×1 to M33×1.5
IH-AD-DIN-028
Bulkhead Union Metric
Indus HydraulicsbulkheadL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-046
Metric Bite Type 45° Elbow UN/UNF Adjustable Stud End
Indus Hydraulics-12 to -52Metric M12×1.5 to M42×2
IH-AD-DIN-016
Blanking Plug for Port with ED Seal
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-MET-053
JIS Metric Male 60° Cone × Metric Male
Indus HydraulicsJIS 30° cone (60° included), metric thread-14 to -36
IH-AD-JIC-048
SAE O-Ring Boss × JIC Female 74° Seat
Indus Hydraulicsup to 315 bar (4,569 psi), manufacturer statedstraight
IH-AD-BSP-028
Swivel Male Stud NPT
Indus Hydraulicsup to 400 bar at smaller sizes; derates with sizebonded-seal
IH-AD-SAEFL-006
Metric Male Bite Type × SAE Flange (L-Series, 3000 psi)
Indus HydraulicsstraightMetric M22×1.5 to M42×2
IH-AD-DIN-030
Male Stud Connector BSPT (DIN 2353)
Indus HydraulicsDIN 24° cone L-series and S-series (M10×1 to M42×2)L6 to L42 (light series), S6 to S38 (heavy series)
IH-AD-NPT-019
Male Connector m NPT X m NPT
Indus HydraulicsNPT taper 1/8" to 2"up to 350 bar (5000 psi)
IH-AD-MET-052
JIS Metric Male 60° Cone × BSPT Male
Indus HydraulicsstraightJIS 30° cone (60° included), metric thread
IH-AD-DIN-021
Swivel Connector BSPT
Indus HydraulicsDIN 24° cone L-series and S-series (M10×1 to M42×2)L6 to L42 (light series), S6 to S38 (heavy series)
From the blog
Written about this range
Assembly, crimping & certification
Getting a hydraulic hose made: what to bring and what we measure
Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.
3 min read
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Failure analysis
Hose routing: bend radius, twist and the failures they cause
Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.
3 min read