Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
94 SKUs4 brands
Body Configuration: 45-elbowBody Configuration: accessoryBody Configuration: branch-teeBody Configuration: bulkhead-elbowBody Configuration: lock-nutBody Configuration: plugBody Configuration: run-teeClear all
IH-AD-JIC-009
Adjustable Run Tee m JIC X m JIC X m Metric
Indus Hydraulics-04 to -32 (1/4" to 2")run-tee
IH-AD-JIC-007
Adjustable Branch Tee m JIC X m NPT X m JIC
Indus Hydraulicsbranch-teeup to 350 bar (5000 psi)
IH-AD-ORFS-030
ORFS Male O-Ring × Metric Thread Male Captive Seal
Indus HydraulicsUN/UNF 9/16-18 to 1.11/16-12ORFS flat face with O-ring
IH-AD-ORFS-003
Adjustable Branch Tee m ORFS X m BSP X m ORFS
Indus HydraulicsORFS UN/UNF (9/16-18 to 1-7/16-12)branch-tee
IH-AD-MET-046
Metric Male 74° Cone × Metric Male Adjustable Stud End Branch Tee
Indus HydraulicsMetric 37° cone (74° included)Metric M14×1.5 to M45×2
IH-AD-HSF-010
Set of Bolts and Spring Washers
Indus HydraulicsSAE J429 Grade 5 / Grade 8 bolt set with spring washers, matching SAE J518 4-bolt pattern1/2" to 5"
IH-AD-DIN-008
Swivel Nut Branch Tee (DIN 2353)
Indus Hydraulics24-coneL6 to L42 (light series), S6 to S38 (heavy series)
IH-AD-MET-021
Metric Male O-Ring × Metric Female Run Tee
Indus Hydraulicsrun teeMetric M14×1.5 to M52×2
IH-AD-JIC-042
JIC Male 74° Cone × BSP Male Captive Seal
Indus HydraulicsUN/UNF 7/16-20 to 1.7/8-12-04 to -24
IH-AD-DIN-002
Lock Nut for Bulkhead
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)none
IH-AD-BSP-074
45° Elbow JIS Gas Male 60° Cone × BSPT Male 60° Seat
Indus Hydraulics45 elbowBSP (G) G1/8-28 to G2-11
IH-AD-JIC-041
45° Elbow JIC Male 74° Cone × NPT Male
Indus Hydraulics45 elbowJIC 37° cone (74° included)
IH-AD-JIC-031
Adjustable 45° Elbow m JIC X m Metric Flat
Indus Hydraulics45-elbow-04 to -32 (1/4" to 2")
IH-AD-JIC-039
45° JIC Male 74° Cone
Indus Hydraulicsup to 345 bar (5,004 psi), manufacturer stated45 elbow
IH-AD-ORFS-005
Adjustable Run Tee m ORFS X m ORFS X m SAE
Indus Hydraulics-04 to -16up to 415 bar (6000 psi)
IH-AD-MET-023
45° Metric Male O-Ring × Metric Male Adjustable Stud End
Indus Hydraulics-12 to -5245 elbow
IH-AD-DIN-049
Metric Bite Type 45° Elbow Male Adjustable Stud End
Indus Hydraulics-12 to -45Metric O-ring stud end
IH-AD-DIN-012
Adjustable RunTee
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-BSP-009
Union Tee (BSP)
Indus Hydraulicsup to 400 bar at smaller sizes; derates with sizeBSPP G1/8 to G2 (parallel)
IH-AD-JIC-051
JIC Male 74° Cone × SAE O-Ring Boss Run Tee
Indus Hydraulics-04 to -24UN/UNF 7/16-20 to 1.7/8-12
IH-AD-ORFS-026
ORFS Male O-Ring × ORFS Female Branch Tee
Indus HydraulicsORFS flat face with O-ring-04 to -24
IH-AD-JIC-010
Adjustable Run Tee m JIC X m JIC X m BSP
Indus Hydraulicsup to 350 bar (5000 psi)-04 to -32 (1/4" to 2")
IH-AD-ORFS-004
Adjustable Branch Tee m ORFS X m Metric X m ORFS
Indus Hydraulics-04 to -16up to 415 bar (6000 psi)
IH-AD-JIC-050
JIC Male 74° Cone Bulkhead Branch Tee (AJJ6J)
Indus Hydraulics-04 to -24JIC 37° cone (74° included)
IH-AD-DIN-047
BSP Adjustable Stud End Run Tee
Indus HydraulicsMetric M12×1.5 to M42×2Metric O-ring stud end
IH-AD-BSP-062
45° Elbow BSP Male 60° Seat × Metric Male
Indus HydraulicsBSP (G) G1/8-28 to G1.1/2-1145 elbow
IH-AD-DIN-017
Blanking Plug with Nut for Cone
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)DIN 24° cone L-series and S-series (M10×1 to M42×2)
From the blog
Written about this range
Assembly, crimping & certification
Getting a hydraulic hose made: what to bring and what we measure
Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.
3 min read
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Failure analysis
Hose routing: bend radius, twist and the failures they cause
Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.
3 min read