Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
95 SKUs4 brands
Body Configuration: 90-elbowBody Configuration: accessoryBody Configuration: blind-flangeBody Configuration: bulkheadBody Configuration: lock-nutBody Configuration: plugBody Configuration: teeClear all
IH-AD-BSP-052
Union Elbow
Indus Hydraulicsbonded-sealup to 400 bar at smaller sizes; derates with size
IH-AD-ORFS-030
ORFS Male O-Ring × Metric Thread Male Captive Seal
Indus HydraulicsUN/UNF 9/16-18 to 1.11/16-12ORFS flat face with O-ring
IH-AD-BSP-075
90° Elbow JIS Gas Male 60° Cone × BSPT Male 60° Seat
Indus Hydraulics-02 to -32JIS 30° cone (60° included), BSP thread
IH-AD-HSF-010
Set of Bolts and Spring Washers
Indus HydraulicsSAE J429 Grade 5 / Grade 8 bolt set with spring washers, matching SAE J518 4-bolt pattern1/2" to 5"
IH-AD-SAEFL-011
90° JIC Male 74° Cone × SAE Flange
Indus Hydraulics90 elbowup to 310 bar (4,496 psi), manufacturer stated
IH-AD-ORFS-014
Adjustable 90° Elbow m ORFS X m SAE
Indus Hydraulicsup to 415 bar (6000 psi)ORFS UN/UNF (9/16-18 to 1-7/16-12)
IH-AD-JIC-011
90° Male Female Connector m JIC X f JIC
Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)37-cone
IH-AD-JIC-042
JIC Male 74° Cone × BSP Male Captive Seal
Indus HydraulicsUN/UNF 7/16-20 to 1.7/8-12-04 to -24
IH-AD-DIN-002
Lock Nut for Bulkhead
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)none
IH-AD-DIN-045
Union Elbow Metric
Indus Hydraulics24-coneDIN 24° cone L-series and S-series (M10×1 to M42×2)
IH-AD-MET-024
90° Metric Male O-Ring × Metric Male Adjustable Stud End
Indus Hydraulics-12 to -52Metric M12×1.25 to M52×2
IH-AD-DIN-022
Swivel Nut Elbow (DIN 2353)
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)DIN 24° cone L-series and S-series (M10×1 to M42×2)
IH-AD-JIC-040
45° Elbow JIC Male 74° Cone Bulkhead
Indus Hydraulicsbulkheadup to 345 bar (5,004 psi), manufacturer stated
IH-AD-DIN-048
Metric Bite Type 90° Elbow UN/UNF Adjustable Stud End
Indus Hydraulics-12 to -52Metric O-ring stud end
IH-AD-BSP-042
Male Stud Elbow NPT (BSP)
Indus HydraulicsBSPP G1/8 to G2 (parallel)up to 400 bar at smaller sizes; derates with size
IH-AD-MET-044
90° Elbow Metric Male 74° Cone × Metric Female 74° Seat
Indus HydraulicsMetric 37° cone (74° included)up to 350 bar (5,076 psi), manufacturer stated
IH-AD-MET-045
Metric Male 74° Cone Tee
Indus HydraulicsMetric M14×1.5 to M33×2up to 350 bar (5,076 psi), manufacturer stated
IH-AD-DIN-031
Male Stud Elbow BSPT (DIN 2353)
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-ORFS-018
Adjustable 90° Elbow m ORFS X m Metric Flat
Indus Hydraulicsup to 415 bar (6000 psi)90-elbow
IH-AD-DIN-036
Adjustable LockNut Elbow Metric
Indus HydraulicsDIN 24° cone L-series and S-series (M10×1 to M42×2)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-SAEFL-005
90° Elbow Flange Connector m JIC X L-series flange
Indus HydraulicsL-series up to 210 bar (3000 psi); S-series up to 415 bar (6000 psi)37-cone
IH-AD-SAEFL-008
90° Metric Male Bite Type × SAE Flange (L-Series, 3000 psi)
Indus Hydraulics90 elbowMetric M22×1.5 to M42×2
IH-AD-JIC-028
Adjustable 90° Elbow m JIC X m Metric Flat
Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)up to 350 bar (5000 psi)
IH-AD-MET-051
JIS Metric Male 60° Cone Tee
Indus Hydraulics-14 to -33JIS 30° cone (60° included), metric thread
IH-AD-DIN-017
Blanking Plug with Nut for Cone
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)DIN 24° cone L-series and S-series (M10×1 to M42×2)
IH-AD-JIC-032
Adjustable 90° Elbow m JIC X m SAE
Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)90-elbow
From the blog
Written about this range
Assembly, crimping & certification
Getting a hydraulic hose made: what to bring and what we measure
Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.
3 min read
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Failure analysis
Hose routing: bend radius, twist and the failures they cause
Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.
3 min read