Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
52 SKUs4 brands
Body Configuration: bulkheadBody Configuration: bulkhead-elbowBody Configuration: double-flangeBody Configuration: lock-nutBody Configuration: plugBody Configuration: run-teeClear all
IH-AD-DIN-007
Swivel Nut Run Tee (DIN 2353)
Indus HydraulicsDIN 24° cone L-series and S-series (M10×1 to M42×2)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-HSF-002
BSP Threaded Double Flange
Indus Hydraulics1/2" to 5"Code 61 up to 210 bar (3000 psi); Code 62 up to 415 bar (6000 psi)
IH-AD-MET-050
JIS Metric Male 60° Cone Plug
Indus HydraulicsJIS 30° cone (60° included), metric threadMetric M14×1.5 to M33×1.5
IH-AD-ORFS-027
ORFS Male O-Ring × ORFS Female Run Tee
Indus Hydraulicsrun teeup to 630 bar (9,137 psi), manufacturer stated
IH-AD-ORFS-031
ORFS Male O-Ring × BSP Male O-Ring Run Tee
Indus Hydraulics-04 to -16ORFS flat face with O-ring
IH-AD-DIN-013
Adjustable Run Tee m Metric X m Metric
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-018
Blanking Plug
Indus HydraulicsL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)L6 to L42 (light series), S6 to S38 (heavy series)
IH-AD-MET-043
Metric Male 74° Cone Plug
Indus Hydraulicsup to 350 bar (5,076 psi), manufacturer stated-10 to -45
IH-AD-BSP-012
Hexagon Socket Plug
Indus Hydraulicsbonded-sealup to 400 bar at smaller sizes; derates with size
IH-AD-MET-048
Metric Male 74° Cone × Metric Male Adjustable Stud End Run Tee
Indus Hydraulicsup to 315 bar (4,569 psi), manufacturer stated-14 to -45
IH-AD-HSF-006
Socket Weld Double Flange
Indus HydraulicsSocket weld for tube/pipe end (1/2" to 5")weld
IH-AD-JIC-045
Metric Thread Male Captive Seal × JIC Female 74° Seat
Indus Hydraulics-10 to -33Metric M10×1 to M33×1.5
IH-AD-DIN-028
Bulkhead Union Metric
Indus HydraulicsbulkheadL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-016
Blanking Plug for Port with ED Seal
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-JIC-009
Adjustable Run Tee m JIC X m JIC X m Metric
Indus Hydraulics-04 to -32 (1/4" to 2")run-tee
IH-AD-ORFS-030
ORFS Male O-Ring × Metric Thread Male Captive Seal
Indus HydraulicsUN/UNF 9/16-18 to 1.11/16-12ORFS flat face with O-ring
IH-AD-MET-021
Metric Male O-Ring × Metric Female Run Tee
Indus Hydraulicsrun teeMetric M14×1.5 to M52×2
IH-AD-JIC-042
JIC Male 74° Cone × BSP Male Captive Seal
Indus HydraulicsUN/UNF 7/16-20 to 1.7/8-12-04 to -24
IH-AD-DIN-002
Lock Nut for Bulkhead
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)none
IH-AD-JIC-040
45° Elbow JIC Male 74° Cone Bulkhead
Indus Hydraulicsbulkheadup to 345 bar (5,004 psi), manufacturer stated
IH-AD-ORFS-005
Adjustable Run Tee m ORFS X m ORFS X m SAE
Indus Hydraulics-04 to -16up to 415 bar (6000 psi)
IH-AD-DIN-012
Adjustable RunTee
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-JIC-051
JIC Male 74° Cone × SAE O-Ring Boss Run Tee
Indus Hydraulics-04 to -24UN/UNF 7/16-20 to 1.7/8-12
IH-AD-JIC-010
Adjustable Run Tee m JIC X m JIC X m BSP
Indus Hydraulicsup to 350 bar (5000 psi)-04 to -32 (1/4" to 2")
IH-AD-DIN-047
BSP Adjustable Stud End Run Tee
Indus HydraulicsMetric M12×1.5 to M42×2Metric O-ring stud end
IH-AD-DIN-017
Blanking Plug with Nut for Cone
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)DIN 24° cone L-series and S-series (M10×1 to M42×2)
From the blog
Written about this range
Assembly, crimping & certification
Getting a hydraulic hose made: what to bring and what we measure
Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.
3 min read
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Failure analysis
Hose routing: bend radius, twist and the failures they cause
Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.
3 min read